Re: [Networker] Netware backup slow throughput

You could also try setting

'set tcp delayed acknowledgement=off'

at the netware 6.x clients.  I believe this has something to do with 
eliminating the 200ms delay.

Refer to http://support.novell.com/cgi-bin/search/searchtid.cgi?/10068360.htm

Regards,
Ryan.


>>> tarjei.jensen AT KVAERNER DOT COM 10/01/03 04:11pm >>>
Librado Pamintuan wrote:

>We have 4 Dell servers running Netware v6x O/S. During incremental or
>level backups, the throughput is normal or as expected, but when we run
>FULL backups, the throughput drops down to 400 to 800 KB/s.
> [SNIP]
>Environment:
>Server NetWorker v6.1.3 on Unix AIX v4.3.3
>Clients: DELL NetWare servers v6, Networker v4.2
>Tape Library: StorageTek 9714 with 6 DLT 7000 tape drives

You probably have an old gigabit ethernet card on the Unix server.

The problem is basically that there is no way to tell Networker on Netware
to use a large (60kB) TCP window.

The server wants large TCP windows, but netware (not unreasonable) uses a
smaller one. This means that in the end, data is received by the server on
tcp timeouts which is every 200ms.

You can fix this by turning off the high performance function on the
ethernet card. Or you replace the card altogether with a more modern one.


greetings,

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=


The following message has been received from the Internet.  Please use with 
caution the message and any attachments




This message has passed through an insecure network.
All enquiries should be directed to the message author

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=