Hi,

I have bacula 5.0 installed on Centos 6.5.
Tape Library with 2 Drives, which I define in autochanger.
But at a time I can mount only one tape in drive (/dev/st0).
When I try to label tape for second tape drive, it failed.
Second drive(/dev/st1) show as "status unknown".

How can I use both drive simultaneously? Or there is limitation in bacula 5.0
 

Below is output of bconsole --> status

Device status:
Autochanger "MSL6030" with devices:
   "Drive-1" (/dev/st0)
   "Drive-2" (/dev/st1)
Device "FileStorage" (/mybackup) is not open.
Device "Drive-1" (/dev/st0) is mounted with:
    Volume:      Tape2
    Pool:        TapeBkp
    Media type:  LTO-2
    Slot 3 is loaded in drive 0.
    Total Bytes=774,144 Blocks=11 Bytes/block=70,376
    Positioned at File=5 Block=0
Device "Drive-2" (/dev/st1) is not open.
    Drive 1 status unknown.
====

Used Volume status:
Tape2 on device "Drive-1" (/dev/st0)
    Reader=0 writers=0 devres=0 volinuse=0
====


Thank you,
Ankush More
This message contains information that may be privileged or confidential and is 
the property of the Capgemini Group. It is intended only for the person to whom 
it is addressed. If you are not the intended recipient, you are not authorized 
to read, print, retain, copy, disseminate, distribute, or use this message or 
any part thereof. If you receive this message in error, please notify the 
sender immediately and delete all copies of this message.


------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their 
applications. Written by three acclaimed leaders in the field, 
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/NeoTech
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users