[Bacula-users] Maximum Changer Wait directive
2014-04-01 13:25:51
I am running bacula 5.2.12 on RHEL6 O.S. with IBM TS3200 Tape Library with two LTO5 drives. Sometimes the autochanger is unable to mount a required tape as the tape gets stuck in
its slot and needs manual intervension. If this happens on a weekend and if I don’t take the corrective action immediately it times out and the job fails. I was thinking of adding the following directive in the bacula-sd.conf on my server:
Maximum Changer Wait = 3d
I would like to know what is the default value for this directive before I make this change. If any of you have a different solution to this problem please let me know.
Thank you.
Uthra
|
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Bacula-users] Maximum Changer Wait directive,
Rao, Uthra R. (GSFC-672.0)[ADNET SYSTEMS INC] <=
|
|
|