Re: [Bacula-users] update slots scan
2011-05-25 11:13:22
On Wed, May 25, 2011 at 10:27 AM, Andre Lorenz <andre AT ns-cw DOT net> wrote:
> Hello together,
>
> i have a NEC-LTO4 (FC) 40 slots changer, and 8 slot LTO2 (8 Slots)
> changer (SCSI).
>
> this one was working perfectly.
>
> after physical move of the changers and servers i cant run anymore
> update slots scan on the LTO4 :-(
> on the old LTO2 i can run it without any problems.
>
> lsscsi will show both both devices.
> [1:0:0:0] mediumx NEC LL0101H-0A 0002 /dev/sch0
> [1:0:1:0] tape IBM ULTRIUM-TD2 38D0 /dev/st0
> [2:0:0:0] tape IBM ULTRIUM-TD4 7A31 /dev/st1
> [2:0:1:0] tape IBM ULTRIUM-TD4 7A31 /dev/st2
> [2:0:1:1] mediumx NEC T40A2 0005 /dev/sch1
>
> i also checked config if device-name changed, ....
>
> on the lto2 the command runs without any problems.
>
> on the LTO4 i am getting following msg:
>
> Connecting to Storage daemon NEC-LTO4 at frabackup01:9103 ...
> 3306 Issuing autochanger "slots" command.
> Device "ULTRIUM-TD4-1" has 0 slots.
> No slots in changer to scan.
>
> i also rebooted / restarted changer, server,services ...........
>
> there is also no output inside logs.
>
> now is there somebody with an idea?
>
I believe it could be a permissions problem or you have the wrong
device for the autochanger in your config. I would execute the
mtx-changer script directly logged in as user bacula and examine the
output..
John
------------------------------------------------------------------------------
vRanger cuts backup time in half-while increasing security.
With the market-leading solution for virtual backup and recovery,
you get blazing-fast, flexible, and affordable data protection.
Download your free trial now.
http://p.sf.net/sfu/quest-d2dcopy1
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|