Hello together,

i have a NEC-LTO4  (FC) 40 slots changer, and 8 slot LTO2 (8 Slots)
changer (SCSI).

this one was working perfectly.

after physical move of the changers and servers i cant run anymore
update slots scan on the LTO4 :-(
on the old LTO2 i can run it without any problems.

lsscsi will show both both devices.
[1:0:0:0]    mediumx NEC      LL0101H-0A       0002  /dev/sch0
[1:0:1:0]    tape    IBM      ULTRIUM-TD2      38D0  /dev/st0
[2:0:0:0]    tape    IBM      ULTRIUM-TD4      7A31  /dev/st1
[2:0:1:0]    tape    IBM      ULTRIUM-TD4      7A31  /dev/st2
[2:0:1:1]    mediumx NEC      T40A2            0005  /dev/sch1

i also checked config if device-name changed, ....

on the lto2 the command runs without any problems.

on the LTO4 i am getting following msg:

Connecting to Storage daemon NEC-LTO4 at frabackup01:9103 ...
3306 Issuing autochanger "slots" command.
Device "ULTRIUM-TD4-1" has 0 slots.
No slots in changer to scan.

i also rebooted / restarted changer, server,services ...........

there is also no output inside logs.

now is there somebody with an idea?

thanks in advance
andre



------------------------------------------------------------------------------
vRanger cuts backup time in half-while increasing security.
With the market-leading solution for virtual backup and recovery, 
you get blazing-fast, flexible, and affordable data protection.
Download your free trial now. 
http://p.sf.net/sfu/quest-d2dcopy1
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users