[Bacula-users] Tar and Bacula doesn't work together.
2011-05-02 13:08:57
Hi all
My first post here. So don't shoot me if I say/do stupid things.
I got a problem with Bacula. The version I use is 2.4.4 on debian etch.
My Bacula runs smootly, everything seems to work.
But now, when I try to execute a tar command I get some errors.
The error:
user:/etc/init.d# tar -tvf /dev/nst0
tar: /dev/nst0: Cannot open: Device or resource busy
tar: Error is not recoverable: exiting now
I discovered that the storage-daemon blocks the tape drive. So when I stop the
daemon, i get:
user:/etc/init.d# tar -tvf /dev/nst0
tar: /dev/nst0: Cannot read: Cannot allocate memory
tar: At beginning of tape, quitting now
tar: Error is not recoverable: exiting now
How can I solve this and is there a tool to see the tapes content when the
daemon is running without using bconsole?
If you need meer info or configs: ask! :)
+----------------------------------------------------------------------
|This was sent by tijshooyberghs AT hotmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
------------------------------------------------------------------------------
WhatsUp Gold - Download Free Network Management Software
The most intuitive, comprehensive, and cost-effective network
management toolset available today. Delivers lowest initial
acquisition cost and overall TCO of any competing solution.
http://p.sf.net/sfu/whatsupgold-sd
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Bacula-users] Tar and Bacula doesn't work together.,
obviously <=
|
|
|