Hello,
Frequently, bacula jobs stall on a ‘waiting for a mount request’. However, when I do mount the requested tape, it still doesn’t run. Wondering what I’m doing wrong here. Any ideas?
Thanks for your time.
Jeremiah
*status storage
….
Device status:
Autochanger "DELL_124T" with devices:
"Drive1" (/dev/nst0)
Device "Drive1" (/dev/nst0) open but no Bacula volume is currently mounted.
Device is BLOCKED waiting for mount of volume "000051L4",
Pool: Offsite
Media type: LTO4
Slot 12 is loaded in drive 0.
Total Bytes Read=0 Blocks Read=0 Bytes/block=0
Positioned at File=0 Block=0
Device "FileStorage" (/tmp) is not open.
====
Used Volume status:
000051L4 on device "Drive1" (/dev/nst0)
Reader=0 writers=0 devres=1 volinuse=0
====
*status slots
The defined Storage resources are:
1: File
2: Tape
Select Storage resource (1-2): 2
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
Connecting to Storage daemon Tape at 10.200.1.124:9103 ...
3306 Issuing autochanger "slots" command.
Device "DELL_124T" has 16 slots.
Connecting to Storage daemon Tape at 10.200.1.124:9103 ...
3306 Issuing autochanger "list" command.
Slot | Volume Name | Status | Media Type | Pool |
------+------------------+-----------+----------------------+--------------------|
1 | 000107L4 | Append | LTO4 | Scratch |
2 | 000025L4 | Disabled | LTO4 | Offsite |
3 | 000053L4 | Append | LTO4 | Scratch |
4 | 000124L4 | Append | LTO4 | Scratch |
5 | 000122L4 | Append | LTO4 | Scratch |
6 | 000123L4 | Append | LTO4 | Scratch |
7 | 000125L4 | Append | LTO4 | Scratch |
8 | 000126L4 | Append | LTO4 | Scratch |
9 | 000127L4 | Append | LTO4 | Scratch |
10 | 000128L4 | Append | LTO4 | Scratch |
11 | 000043L4 | Append | LTO4 | Onsite |
12 | 000051L4 | Recycle | LTO4 | Offsite |
13 | 000052L4 | Append | LTO4 | Scratch |
14 | 000033L4 | Append | LTO4 | Scratch |
15 | 000037L4 | Append | LTO4 | Scratch |
16 | 000054L4 | Append | LTO4 | Scratch |
You have messages.
Jeremiah Jester
Informatics Specialist
Microbiology – Katze Lab
206-732-6185