[Bacula-users] IBM 3573-TL, LTO5, speed
2011-02-01 11:37:24
Hi,
I'm with Debian/Squeez and Bacula 5.0.2. I use the tape library TS3100 with a IBM 3573-TL.
Questions: 1) mount a tape to the drive 2 2) speed up the backup with LTO5
1) And i've got 2 drives.
A drive 1 is mounted with a tape e.g. LT00X. And i'd like to use the drive 2. So i've mounted it with a tape : LT00Y. Then, the drive 2 is loaded with the tape - LT00Y-, but it is said that drive is mounted with the tape LT00X !
*mount drive=1 storage=Drive-2 slot=9
3301 Issuing autochanger "loaded? drive 1" command.
3302 Autochanger "loaded? drive 1", result: nothing loaded.
3304 Issuing autochanger "load slot 9, drive 1" command.
3305 Autochanger "load slot 9, drive 1", status is OK.
3902 Cannot mount Volume on Storage Device "Drive-2" (/dev/nst1) because:
label.c:239 Could not reserve volume LT1002L5 on "Drive-2" (/dev/nst1)
3001 Device "Drive-2" (/dev/nst1) is already mounted with Volume "LT1002L5"
Device "Drive-1" (/dev/nst0) is mounted with: Volume: LT1002L5 Pool: *unknown* Media type: LTO-5 Slot 2 is loaded in drive 0. Total Bytes=96,637,943,808 Blocks=1,497,983 Bytes/block=64,512
Positioned at File=8 Block=9,896 Device "Drive-2" (/dev/nst1) is mounted with: Volume: LT1002L5 Pool: *unknown* Media type: LTO-5 Slot 9 is loaded in drive 1.
Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
Positioned at File=0 Block=0 The drive 2 should have mounted with LT00Y but not LT00X ! Could someone explain me about this behaviour, please ?
Here's my bacula-sd.conf
Autochanger { Name = Autochanger Device = Drive-1
Device = Drive-2
Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" Changer Device = /dev/sg3 }
Device { Name = Drive-1 # Drive Index = 0 Media Type = LTO-5 # Library 3573-TL
Archive Device = /dev/nst0 AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes Maximum File Size = 12GB
Spool Directory = "/data/spool" Maximum Spool Size = 100gb Maximum Job Spool Size = 60gb Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" }
Device { Name = Drive-2 #
Drive Index = 1 Media Type = LTO-5 # Library 3573-TL Archive Device = /dev/nst1 AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; RemovableMedia = yes;
RandomAccess = no; AutoChanger = yes Maximum File Size = 12GB Spool Directory = "/data/spool" Maximum Spool Size = 100gb Maximum Job Spool Size = 60gb Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
2) The speed of my backup is not very fast: Rate: 43362.5 KB/s I'd like to have some feedback about the LTO5 and the speed that could be reached...
In my bacula-dir, i do not use the "Spool data" option.
Thank you in advance for your help.
Peace !
------------------------------------------------------------------------------
Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)!
Finally, a world-class log management solution at an even better price-free!
Download using promo code Free_Logger_4_Dev2Dev. Offer expires
February 28th, so secure your free ArcSight Logger TODAY!
http://p.sf.net/sfu/arcsight-sfd2d _______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Bacula-users] IBM 3573-TL, LTO5, speed,
yesi <=
- Re: [Bacula-users] IBM 3573-TL, LTO5, speed, John Drescher
- Re: [Bacula-users] IBM 3573-TL, LTO5, speed, yesi
- Re: [Bacula-users] IBM 3573-TL, LTO5, speed, Rory Campbell-Lange
- Re: [Bacula-users] IBM 3573-TL, LTO5, speed, yesi
- Re: [Bacula-users] IBM 3573-TL, LTO5, speed, yesi
- Re: [Bacula-users] IBM 3573-TL, LTO5, speed, Rory Campbell-Lange
- Re: [Bacula-users] IBM 3573-TL, LTO5, speed, Arunav Mandal
- Re: [Bacula-users] IBM 3573-TL, LTO5, speed, yesi
|
|
|