[Bacula-users] Enabling hardware compression

Subject:	[Bacula-users] Enabling hardware compression
From:	Romer Ventura <rventura AT h-st DOT com>
To:	bacula-users <bacula-users AT lists.sourceforge DOT net>
Date:	Wed, 18 Aug 2010 09:57:36 -0500

Hello,

I am running Bacula 5.0.2 with a Quantum SuperLoader 3 with DLTv4 tape drive. If i want to enable hardware compression so i can use 320GB from my VS1 tapes all i would need to do is run this command: mt -f /dev/nst0 defcompression 1, correct?

Is there any way to enable and disable hardware compression using bacula before a job starts..?

Thanks

------
Romer Ventura

------------------------------------------------------------------------------
This SF.net email is sponsored by 

Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

<Prev in Thread]

Current Thread

[Next in Thread>

Previous by Date:

[Bacula-users] Bsmtp or another solution, Daniel

Next by Date:

Re: [Bacula-users] Enabling hardware compression, John Drescher

Previous by Thread:

[Bacula-users] Bsmtp or another solution, Daniel

Next by Thread:

Re: [Bacula-users] Enabling hardware compression, John Drescher

Indexes:

[Date] [Thread] [Top] [All Lists]