"Bruno Friedmann" <bruno AT ioda-net DOT ch> kirjoitti
viestissä:4B6A8DD2.1040504 AT ioda-net DOT ch...
> check permission on your /mnt/mnt1 as the running bacula-sd daemon should
> be allowed to write some backup data here
> isn't it ?
>
> :-)
...and since it's /mnt/... the actual problem probably is the permissions of
the device file for attached external disk, not the bare mount point alone.
This may lead to need of writing udev rules, since chmod isn't of much help
with those devices.
>
>
> On 02/04/2010 09:16 AM, eMJay wrote:
>>
>>
>>> I already had this problem. I suspect that it happens when a volume is
>>> recycled after the backup job starts
>>> Do you have enough volumes? Is Purge Oldest Volumes option set?
>>
>>
>> I have created 10 volumes.
>> +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
>> | MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles |
>> VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten
>> |
>> +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
>> | 1 | store0001 | Full | 1 | 0 | 0 |
>> 31,536,000 | 1 | 0 | 0 | File | 0000-00-00 00:00:00
>> |
>> | 2 | store0002 | Append | 1 | 0 | 0 |
>> 31,536,000 | 1 | 1 | 0 | File | 0000-00-00 00:00:00
>> |
>> | 3 | store0003 | Append | 1 | 0 | 0 |
>> 31,536,000 | 1 | 2 | 0 | File | 0000-00-00 00:00:00
>> |
>> | 4 | store0004 | Append | 1 | 0 | 0 |
>> 31,536,000 | 1 | 3 | 0 | File | 0000-00-00 00:00:00
>> |
>> | 5 | store0005 | Append | 1 | 0 | 0 |
>> 31,536,000 | 1 | 4 | 0 | File | 0000-00-00 00:00:00
>> |
>> | 6 | store0006 | Append | 1 | 0 | 0 |
>> 31,536,000 | 1 | 5 | 0 | File | 0000-00-00 00:00:00
>> |
>> | 7 | store0007 | Append | 1 | 0 | 0 |
>> 31,536,000 | 1 | 6 | 0 | File | 0000-00-00 00:00:00
>> |
>> | 8 | store0008 | Append | 1 | 0 | 0 |
>> 31,536,000 | 1 | 7 | 0 | File | 0000-00-00 00:00:00
>> |
>> | 9 | store0009 | Append | 1 | 0 | 0 |
>> 31,536,000 | 1 | 8 | 0 | File | 0000-00-00 00:00:00
>> |
>> | 10 | store0010 | Append | 1 | 0 | 0 |
>> 31,536,000 | 1 | 9 | 0 | File | 0000-00-00 00:00:00
>> |
>> +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
>>
>> Because I am newbie, I wonder if volumes are created correctly.
>> I suspect there is something wrong, because when I try to run job, the
>> output is:
>>
>> 04-Feb 09:01 ubuntu-sd JobId 15: Warning: label.c:351 Open device
>> "FileStorage" (/mnt/mnt1) Volume "store0002" failed: ERR=dev.c:490 Could
>> not open: /mnt/mnt1/store0002, ERR=Permission denied
>>
>> 04-Feb 09:01 ubuntu-sd JobId 15: Please mount Volume "store0002" or label
>> a new one for:
>> Job: Client1.2010-02-04_09.01.19.04
>> Storage: "FileStorage" (/mnt/mnt1)
>> Pool: Default
>> Media type: File
>>
>> When tried to label:
>>
>> *label
>> Automatically selected Catalog: MyCatalog
>> Using Catalog "MyCatalog"
>> Automatically selected Storage: File
>> Enter new Volume name: store0003
>> Defined Pools:
>> 1: Default
>> 2: Scratch
>> Select the Pool (1-2): 1
>> Connecting to Storage daemon File at ubuntu:9103 ...
>> Sending label command for Volume "store0003" Slot 2 ...
>> 3910 Unable to open device "FileStorage" (/mnt/mnt1): ERR=dev.c:490 Could
>> not open: /mnt/mnt1/store0003, ERR=Permission denied
>>
>> Label command failed for Volume store0003.
>> Do not forget to mount the drive!!!
>>
>> I don't understand that ERR=Permission denied. That dir is already
>> created with chmod 666
>>
>> And finally an output after status 2 command:
>> Device status:
>> Device "FileStorage" (/mnt/mnt1) is not open.
>> Device is BLOCKED waiting for mount of volume "store0002",
>> Pool: Default
>> Media type: File
>>
>> How can I mount store0002 volume? I doesn't work using command in
>> bconsole. In bacula-sd.conf, I set storage device like this:
>> Device {
>> Name = FileStorage
>> Media Type = File
>> Archive Device = /mnt/mnt1
>> LabelMedia = yes; # lets Bacula label unlabeled media
>> Random Access = Yes;
>> AutomaticMount = yes; # when device opened, read it
>> RemovableMedia = no;
>> AlwaysOpen = yes;
>> }
>>
>> Thanks for help,
>> Michal
>>
>
>
>
> --
>
> Bruno Friedmann
>
>
> ------------------------------------------------------------------------------
> The Planet: dedicated and managed hosting, cloud storage, colocation
> Stay online with enterprise data centers and the best network in the
> business
> Choose flexible plans and management services without long-term contracts
> Personal 24x7 support from experience hosting pros just a phone call away.
> http://p.sf.net/sfu/theplanet-com
------------------------------------------------------------------------------
The Planet: dedicated and managed hosting, cloud storage, colocation
Stay online with enterprise data centers and the best network in the business
Choose flexible plans and management services without long-term contracts
Personal 24x7 support from experience hosting pros just a phone call away.
http://p.sf.net/sfu/theplanet-com
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
