Bacula-users

Re: [Bacula-users] Some problem with database and volumes

2010-02-04 04:08:33
Subject: Re: [Bacula-users] Some problem with database and volumes
From: Bruno Friedmann <bruno AT ioda-net DOT ch>
To: bacula-users AT lists.sourceforge DOT net
Date: Thu, 04 Feb 2010 10:05:22 +0100
check permission on your /mnt/mnt1 as the running bacula-sd daemon should be 
allowed to write some backup data here
isn't it ?

:-)


On 02/04/2010 09:16 AM, eMJay wrote:
> 
> 
>> I already had this problem. I suspect that it happens when a volume is 
>> recycled after the backup job starts 
>> Do you have enough volumes? Is Purge Oldest Volumes option set?
> 
> 
> I have created 10 volumes.
> +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
> | MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles | 
> VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten         |
> +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
> |       1 | store0001  | Full      |       1 |        0 |        0 |   
> 31,536,000 |       1 |    0 |         0 | File      | 0000-00-00 00:00:00 |
> |       2 | store0002  | Append    |       1 |        0 |        0 |   
> 31,536,000 |       1 |    1 |         0 | File      | 0000-00-00 00:00:00 |
> |       3 | store0003  | Append    |       1 |        0 |        0 |   
> 31,536,000 |       1 |    2 |         0 | File      | 0000-00-00 00:00:00 |
> |       4 | store0004  | Append    |       1 |        0 |        0 |   
> 31,536,000 |       1 |    3 |         0 | File      | 0000-00-00 00:00:00 |
> |       5 | store0005  | Append    |       1 |        0 |        0 |   
> 31,536,000 |       1 |    4 |         0 | File      | 0000-00-00 00:00:00 |
> |       6 | store0006  | Append    |       1 |        0 |        0 |   
> 31,536,000 |       1 |    5 |         0 | File      | 0000-00-00 00:00:00 |
> |       7 | store0007  | Append    |       1 |        0 |        0 |   
> 31,536,000 |       1 |    6 |         0 | File      | 0000-00-00 00:00:00 |
> |       8 | store0008  | Append    |       1 |        0 |        0 |   
> 31,536,000 |       1 |    7 |         0 | File      | 0000-00-00 00:00:00 |
> |       9 | store0009  | Append    |       1 |        0 |        0 |   
> 31,536,000 |       1 |    8 |         0 | File      | 0000-00-00 00:00:00 |
> |      10 | store0010  | Append    |       1 |        0 |        0 |   
> 31,536,000 |       1 |    9 |         0 | File      | 0000-00-00 00:00:00 |
> +---------+------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
> 
> Because I am newbie, I wonder if volumes are created correctly.
> I suspect there is something wrong, because when I try to run job, the output 
> is:
> 
> 04-Feb 09:01 ubuntu-sd JobId 15: Warning: label.c:351 Open device 
> "FileStorage" (/mnt/mnt1) Volume "store0002" failed: ERR=dev.c:490 Could not 
> open: /mnt/mnt1/store0002, ERR=Permission denied
> 
> 04-Feb 09:01 ubuntu-sd JobId 15: Please mount Volume "store0002" or label a 
> new one for:
>     Job:          Client1.2010-02-04_09.01.19.04
>     Storage:      "FileStorage" (/mnt/mnt1)
>     Pool:         Default
>     Media type:   File
> 
> When tried to label:
> 
> *label
> Automatically selected Catalog: MyCatalog
> Using Catalog "MyCatalog"
> Automatically selected Storage: File
> Enter new Volume name: store0003
> Defined Pools:
>      1: Default
>      2: Scratch
> Select the Pool (1-2): 1
> Connecting to Storage daemon File at ubuntu:9103 ...
> Sending label command for Volume "store0003" Slot 2 ...
> 3910 Unable to open device "FileStorage" (/mnt/mnt1): ERR=dev.c:490 Could not 
> open: /mnt/mnt1/store0003, ERR=Permission denied
> 
> Label command failed for Volume store0003.
> Do not forget to mount the drive!!!
> 
> I don't understand that ERR=Permission denied. That dir is already created 
> with chmod 666
> 
> And finally an output after status 2 command:
> Device status:
> Device "FileStorage" (/mnt/mnt1) is not open.
>     Device is BLOCKED waiting for mount of volume "store0002",
>        Pool:        Default
>        Media type:  File
> 
> How can I mount store0002 volume? I doesn't work using command in bconsole. 
> In bacula-sd.conf, I set storage device like this:
> Device {
>   Name = FileStorage
>   Media Type = File
>   Archive Device = /mnt/mnt1
>   LabelMedia = yes;                   # lets Bacula label unlabeled media
>   Random Access = Yes;
>   AutomaticMount = yes;               # when device opened, read it
>   RemovableMedia = no;
>   AlwaysOpen = yes;
> }
> 
> Thanks for help,
> Michal
> 



-- 

     Bruno Friedmann


------------------------------------------------------------------------------
The Planet: dedicated and managed hosting, cloud storage, colocation
Stay online with enterprise data centers and the best network in the business
Choose flexible plans and management services without long-term contracts
Personal 24x7 support from experience hosting pros just a phone call away.
http://p.sf.net/sfu/theplanet-com
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users