Bacula-users

[Bacula-users] Antwort: How to prevent two clients to run at the same time

2009-06-22 05:01:22
Subject: [Bacula-users] Antwort: How to prevent two clients to run at the same time
From: C.Keschnat AT internet-mit-iQ DOT de
To: Frank Altpeter <frank.altpeter AT gmail DOT com>
Date: Mon, 22 Jun 2009 10:56:50 +0200
Frank Altpeter <frank.altpeter AT gmail DOT com> wrote on 22.06.2009 10:44:53:

> Frank Altpeter <frank.altpeter AT gmail DOT com>

> 22.06.2009 10:44
>
> An

>
> bacula-users AT lists.sourceforge DOT net

>
> Kopie

>
> Thema

>
> [Bacula-users] How to prevent two clients to run at the same time

>
> Hi list,
>
> I'm running a bacula server with almost 100 clients on it. For
> historical and data saving reasons, each client has its own block of
> Client, Job, Storage, and Pool definition (based on client's
> fqdn).Data is saved to disk, and then, by external scripts, rotated to
> tape. According the current configuration, all clients are started via
> one Schedule on the same time and bacula is managing the run based on
> a MaximumConcurrentJobs set to 12, which runs fine so far.
> But, there's two clients, which I need to configure in a way, that
> it's impossible for them to run simultaneously. The one client is a
> vmware host system, and the other client is a vmware guest system on
> this host. And sometimes it happens that they both run in parallel
> which takes down performance on both systems.
> Because of the current structure, I'm not able to just define a
> dedicated Pool resource for these two clients and put a
> MaximumConcurrentJobs=1 into it (which AFAIK would be the easiest
> solution for default environments). So I'm searching for alternative
> solutions for my problem, which is not "start client a on 16:00 and
> client b 12 hours later"  :)
>
> Any hints for funny solutions welcome :)
>
> Besides that, wouldn't it a good point to have the
> MaximumConcurrentJobs config option also for the Schedule resource ?
>


You could just give one server a lower priority. It would then run after all other Jobs. The default is 10 (11 for the catalog), so Priority = 12 in the Job Resource will make it run later.
------------------------------------------------------------------------------
Are you an open source citizen? Join us for the Open Source Bridge conference!
Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250.
Need another reason to go? 24-hour hacker lounge. Register today!
http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
<Prev in Thread] Current Thread [Next in Thread>