Re: amrecover failing
2004-10-20 13:49:48
Thanks for the replies. Everyone who did so suggested that the tape
was not rewound. Unfortunately, that's not case. I've made sure to
eject the tape, reload the tape, and run mt -f /dev/st0 rewind, and
then mt -f /dev/st0 status which shows:
$ mt -f /dev/st0 status
drive type = Generic SCSI-2 tape
drive status = 1107296256
sense key error = 0
residue count = 0
file number = 0
block number = 0
Tape block size 0 bytes. Density code 0x42 (unknown).
Soft error count since last status=0
General status bits on (41010000):
BOT ONLINE IM_REP_EN
--
Seeya,
Paul
GPG Key fingerprint = 1660 FECC 5D21 D286 F853 E808 BB07 9239 53F1 28EE
If you're not having fun, you're not doing it right!
|
|
|