Problems with dumps
2004-07-30 17:37:48
Hello guys,
I am trying to do a full backup of 03 filesystems (127 GB), and my tape is an
AIT 50/130 GB tape driver.
My amcheck is OK, no problems found ...
Amdump simply don't work and report me this :
> These dumps were to tape fita03.
> *** A TAPE ERROR OCCURRED: [[writing file: No space left on device]].
> Some dumps may have been left in the holding disk.
> Run amflush to flush them to tape.
> The next tape Amanda expects to use is: a new tape.
>
> FAILURE AND STRANGE DUMP SUMMARY:
> servarq.es /projeto2 lev 0 FAILED [dumps too big, 16044295 KB, but
cannot incremental dump new disk]
> servarq.es /projeto3 lev 0 STRANGE
> servarq.es /projeto1 lev 0 FAILED [out of tape]
> servarq.es /projeto1 lev 0 FAILED ["data write: Connection reset by
peer"]
> servarq.es /projeto1 lev 0 FAILED [dump to tape failed]
>
>
> STATISTICS:
> Total Full Daily
> -------- -------- --------
> Estimate Time (hrs:min) 0:21
> Run Time (hrs:min) 11:56
> Dump Time (hrs:min) 5:18 5:18 0:00
> Output Size (meg) 17838.9 17838.9 0.0
> Original Size (meg) 33755.8 33755.8 0.0
> Avg Compressed Size (%) 52.8 52.8 --
> Filesystems Dumped 1 1 0
> Avg Dump Rate (k/s) 956.0 956.0 --
>
> Tape Time (hrs:min) 5:19 5:19 0:00
> Tape Size (meg) 17838.9 17838.9 0.0
> Tape Used (%) 35.7 35.7 0.0
> Filesystems Taped 1 1 0
> Avg Tp Write Rate (k/s) 955.5 955.5 --
>
> USAGE BY TAPE:
> Label Time Size % Nb
> fita03 5:19 17838.9 35.7 1
>
>
> FAILED AND STRANGE DUMP DETAILS:
>
> /-- servarq.es /projeto3 lev 0 STRANGE
> sendbackup: start [servarq.estatica.com.br:/projeto3 level 0]
> sendbackup: info BACKUP=/bin/gtar
> sendbackup: info RECOVER_CMD=/bin/gtar -f... -
> sendbackup: info end
> ? gtar: ./projeto3/COMGAS-1463/Enrique/Cartas a Tramitar/oficio 04-08xx -
CPTM - S\306o Paulo - 03.035 - 1.doc: Warning: Cannot stat: No such file or
directory
> ? gtar: ./projeto3/COMGAS-1463/Enrique/Cartas a Tramitar/oficio 04-08xx -
CPTM - S\306o Paulo - 03.035 - 2.doc: Warning: Cannot stat: No such file or
directory
> ? gtar: ./projeto3/COMGAS-1463/Enrique/Cartas a Tramitar/oficio 04-08xx -
METRO - S\306o Paulo - 03.035.doc: Warning: Cannot stat: No such file or
directory
> ? gtar: ./projeto3/COMGAS-1463/e-mail recebido ate/COMGAS/Fw_
Concorr\210ncia Elabora\207\306o Projeto Executivo - Bols\344es Av_
Jabaquara_Lino Coutinho_Winner_Cardoso Almeida_Ant\223nio Ambuda_Costa
Marina_Ida Kolbi_ERS41_Ripasa Pap\202is Limeira.eml: Warning: Cannot stat:
No such file or directory
> ? gtar: ./projeto3/COMGAS-1463/e-mail recebido ate/COMGAS/Fw_
Concorr\210ncia Elabora\207\306o Projeto Executivo - Bols\344es Av_
Jabaquara_Lino Coutinho_Winner_Cardoso Almeida_Ant\223nio Ambuda_Costa
Marina_Ida Kolbi_ERS41_Ripasa_Pap\202is Limeira.eml: Warning: Cannot stat:
No such file or directory
> | Total bytes written: 35395502080 (33GB, 1.8MB/s)
> sendbackup: size 34565920
> sendbackup: end
> \--------
>
> /-- servarq.es /projeto1 lev 0 FAILED ["data write: Connection reset by
peer"]
> sendbackup: start [servarq.estatica.com.br:/projeto1 level 0]
> sendbackup: info BACKUP=/bin/gtar
> sendbackup: info RECOVER_CMD=/bin/gtar -f... -
> sendbackup: info end
> \--------
>
>
> NOTES:
> planner: tapecycle (5) <= runspercycle (7)
> planner: Adding new disk servarq.estatica.com.br:/projeto2.
> planner: Adding new disk servarq.estatica.com.br:/projeto3.
> planner: Adding new disk servarq.estatica.com.br:/projeto1.
> taper: tape fita03 kb 43281440 fm 2 writing file: No space left on
device
>
>
> DUMP SUMMARY:
> DUMPER STATS TAPER STATS
> HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s
> -------------------------- --------------------------------- ------------
> servarq.esta /projeto1 0 FAILED ---------------------------------------
> servarq.esta /projeto2 0 FAILED ---------------------------------------
> servarq.esta /projeto3 0 3456592018267056 52.8 318:28 956.0 318:37
955.5
>
> (brought to you by Amanda version 2.4.4p3)
At my configuration file I use this options :
define dumptype comp-high {
> global
> comment "very important partitions on fast machines"
> compress client best
> priority high
> }
>
> Compress: I supose that option I used the best, but the slowest one, right ?
> What the comprresion that is used at this option ? bzip2 ?
At my disklist I use :
> my_host.my_domain /dir1 comp-high
> my_host.my_domain /dir2 comp-high
> my_host.my_domain /dir3 comp-high
> my_host.my_domain /dir4 comp-high
Someone could help me ???
Am I providing enough information ?
Regards,
InfraNet Tecnologia
Fábio M. A. Cunha
(55 11) 5542-0941 ramal 22
(55 11) 9603-6377
www.infranetsp.com.br
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Problems with dumps,
Fábio Mendonça Albuquerque Cunha <=
|
|
|