Yep, setting up NDMP is like trying to drive through an obstacle course with a
blindfold on.
I think your dataformat is wrong on the DEFINE DATAMOVER.
You want NDMPDUMP, not NETAPPDUMP, as your box isn't a NetApp.
>From the book:
DATAFormat (Required) Specifies the data format that is used by this data
mover.
NETAPPDump
NETAPPDUMP must be used for NetApp NAS file servers and the IBM System
Storage N Series.
CELERRADump
CELERRADUMP must be used for EMC Celerra NAS file servers.
NDMPDump
NDMPDump must be used for NAS file servers other than NetApp or EMC file
servers.
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Underdown,John William
Sent: Thursday, December 12, 2013 8:22 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] TSM NDMP HNAS Question?
Dear W,
Thanks for the reply. i'm on a steep learning curb with NDMP. i followed these
instructions which were provided by another adsm-l member.
http://publib.boulder.ibm.com/infocenter/tsminfo/v6/index.jsp?topic=%2Fcom.ibm.itsm.srv.doc%2Ft_ndmp_nas_file_srvs_backup_restore.html
Performing NDMP filer to Tivoli Storage Manager server backups You can back up
data to a single Tivoli Storage Manager server rather than attaching a tape
library to each NAS device.
on step 3.
register node nas1 nas1 type=nas domain=standard define datamover nas1 type=nas
hla=nas1 user=root password=***** dataformat=netappdump
i get
ANR9999D_2854923275 spiOutMsg(ndmpspi.c:1271) Thread<227>: NDMP Server does not
support Token Base Incremental Backup.
i found this in the archives when searching for this error:
"BlueARC support pointed me in the right direction.
`ndmp-option -d tokens on`, followed by an NDMP service restart on the NAS made
backups work. Now to figure out the rest of the NDMP voodoo.."
it's an old posting, but hnas is using BlueARC's ndmp and i have the hnas docs
and console access, so i'll follow this lead and see were it takes me..
if anyone else has any ideas, it would be greatly appreciated.
Many Thanks.
On 12/11/2013 11:23 AM, Prather, Wanda wrote:
> AFAIK any NAS box that supports NDMP can be backed up to TSM via TCP/IP and
> ends up in the regular storage pool hierarchy, i.e. disk is fine.
>
> But I don't know that the NDMP protocol knows how to do a non-tape fibre
> connection, any more than TSM does.
> Do you have any documentation on how that would work from the NDMP end?
>
> W
>
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of Underdown,John William
> Sent: Tuesday, December 10, 2013 1:58 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: [ADSM-L] TSM NDMP HNAS Question?
>
> Hi All.
>
> i'm trying to determine if it's possible to setup a HNAS (Hitachi) 3080 NDMP
> backup to TSM Server 6.3.4.0/RHEL 6.4. we don't have any tape in our
> environment, virtual or otherwise, we're disk only. the SAN admin can create
> a FC connection between the TSM server and the HNAS if it can be used for lan
> free backups.
>
> i'm assuming these steps on the TSM server (excluding setting up policy
> domain, copy group, storage pools, and etc):
>
> register node type=nas.
> define datamover type=nas
> define virtualfsmapping
>
> i don't know if this is possible without some type of library and if so how
> does TSM negotiate the FC path?
>
> if someone could point me in the right direction, it would be greatly
> appreciated.
>
> Many Thanks.
>
> john underdown
|
