Re: [NV-L] DB2 nvcollector upgrade HOW??
2007-09-19 10:50:15
Yes, it is common to do it as a post
install task.
In fact it very easy to switch back
and forth between the two types of SNMP Data Collectors (assuming you have
the pre-reqs in place). You can't use both concurrently though.
The installation of DB2 is documented
in the DB2 Guides (no you will not find details on how to do it in the
NetView doc ) :
http://publib.boulder.ibm.com/infocenter/db2luw/v9/index.jsp
The NetView documentation tells you
how to setup the different SNMP Data Collectors:
http://publib.boulder.ibm.com/infocenter/tivihelp/v3r1/index.jsp?toc=/com.ibm.itnetview.doc/toc.xml
See "UNIX and Linux Installation
Guide" -> Planning for Installation -> Planning for Deployment
-> Determining which data collector application to use
See "UNIX and Linux Installation
Guide" -> Planning for Installation -> Product Requirements
-> Software Requirements -> Requirement for data collection
See "UNIX and Linux Administrator's
Guide" -> Managing Network Performance -> Collecting Data for
Historical Analysis -> SNMPv1/v2 SNMP Collector (nvcollectord)
See "UNIX and Linux Administrator's
Guide" -> Managing Network Performance -> Collecting Data for
Historical Analysis -> Switching SNMP Data Collectors
Assuming you've installed a DB2 Server
(on the same box as the NetView server .... a "requirement"),
and also assuming you have made the suggested DB2 configuration changes
in the planning section I included above, then you're probably at the point
of following the instructions documented in the "Switching SNMP Data
Collectors" section.
Compliments of NetView Support .....
Gareth Holl
SWG Client Support - Tivoli Software
Advisory S/W Engineer - Technical Team Lead
IBM Certified Deployment Professional
o/l 1-800-426-7378 t/l 444-9610 gholl AT us.ibm DOT com
| |
Jeff Fitzwater <jfitz AT princeton DOT edu>
Sent by: nv-l-bounces AT lists.ca.ibm DOT com
09/19/2007 09:17 AM
Please respond to
Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com> |
|
To
| Tivoli NetView Discussions <nv-l AT lists.ca.ibm DOT com>
|
cc
|
|
Subject
| [NV-L] DB2 nvcollector upgrade HOW?? |
|
NV 7.1.5 FP1
SOL 9
I want to use SNMPV2 collector.
Did NOT install DB2 with initial NetView install.
I have jut installed the DB2 package. (I think, since there is no
clear
doc on how )
Has anybody done this as a post install?
I have talked to support, and they seem to be lost too. I have been
working with DB2 group but they don't know Netview.
Can anybody help?
Thanks in advance.
Jeff Fitzwater
OIT Network Systems
Princeton University
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
_______________________________________________
NV-L mailing list
NV-L AT lists.ca.ibm DOT com
Unsubscribe:NV-L-leave AT lists.ca.ibm DOT com
http://lists.ca.ibm.com/mailman/listinfo/nv-l (Browser access limited to
internal IBM'ers only)
|
|
|