Re: [nv-l] SOLVED - Traps Limitation??
2006-04-15 01:41:09
Hi,
I figured it out... the netview was
flooded with traps, and it was preventing Netview (netmon) to work properl,
now since we have limited the traps from devices everything is back to
normal. There seems like a limitation in netview on number of traps that
it can process, IBM should document it if there is one!
Regards,
Usman Taokeer
Si3.
James Shanks <jshanks AT us.ibm DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com
15-03-06 11:35 PM
Please respond to
nv-l AT lists.us.ibm DOT com |
|
To
| nv-l AT lists.us.ibm DOT com
|
cc
|
|
Subject
| Re: [nv-l] Traps Limitation?? |
|
Usman,
I doubt that you can ever solve this problem by merely guessing at probable
causes.
Stop guessing, turn on the full netmon trace (netmon -M -1), and call
Support.
They will be able to tell you what netmon is doing, or else pass the trace
to someone else who can.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and Windows
Tivoli Software / IBM Software Group
usman.taokeer@s-i
ii.com
Sent by:
To
owner-nv-l@lists.
nv-l AT lists.us.ibm DOT com
us.ibm.com
cc
nv-l AT lists.us.ibm DOT com,
owner-nv-l AT lists.us.ibm DOT com
03/15/2006 09:47
Subject
AM
Re: [nv-l] Traps
Limitation??
Please respond to
nv-l AT lists.us DOT ibm
.com
Gareth,
Ok! here is the scenario:
NetView 7.1.4 FP04
Windows 2003 SP1
Hosted on a Dell Dual XEON Processor with 2GB RAM!
There are around 1200 Nodes discovered in the network, and we have around
400 Routers which are sending different traps to the Netview server. The
problem is whenever we try to "Demand Poll, Quick Test etc" any
device it
just keeps saying "Waiting for netmon to respond" !!! Any clues
what's
causing this? There is plenty of Memory available and the CPU utilization
is also between 4-10% only!
Regards,
Usman Taokeer
Si3.
Gareth Holl <gholl AT us.ibm DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com
To
nv-l AT lists.us.ibm DOT com
15-03-06 08:21 AM
cc
Subject
Please respond to
Re: [nv-l]
Traps
nv-l AT lists.us.ibm DOT com
Limitation??
There is always going to be a limit of some sort, whether with the
hardware, OS, or trapd's ability itself. This is most likely dependent
on
the resources (CPU speed, number of CPUs, and available memory per process)
available on the system hosting NetView.
trapd may end up consuming most, if not all cycles of a single CPU during
heavy trap reception. So a multi-CPU box would be essential so that other
processes could continue to run. High CPU utilization caused by trap floods
and even the subsequent processing of the traps by other daemons such as
nvcorrd could well affect netmon's ability to keep up if it cannot get
the
CPU cycles it needs.
trapd will try caching/queuing all events received (with the goal to
eventually process every single one of them), hence the need for a large
amount of memory and an adequate queue size. The cached events will be
processed when there is a break in trap reception.....this could be some
time after the trap was originally generated. So while trapd is still
receiving traps, it is possible for NetView's internal events (including
those from netmon) to be caught up in this process and thus stayed
queued/unprocessed for some time. This probably isn't a direct affect on
netmon but instead more of a perceived affect as status events are not
processed in a timely fashion and thus nodes don't change color on the
map
in a timely fashion
That's all I have.
Gareth
usman.taokeer AT s-iii DOT com
Sent by: owner-nv-l AT lists.us.ibm DOT com
To
03/14/2006 09:57 PM
nv-l AT lists.us DOT ibm.c
om
cc
Please respond to
nv-l
Subject
[nv-l] Traps
Limitation??
Hi List,
Just wanted to know are there any limitations On Netview on the number
of
traps (coming from different nodes) it can handle? If there is any would
it
effect the behaviour of netmon?
Regards,
Usman
Si3.
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [nv-l] SOLVED - Traps Limitation??,
usman . taokeer <=
|
|
|