Re: [nv-l] RE: Location.conf
2004-02-19 15:02:43
255 or 0 is capable of being used. I ahve loaded the fix they sent me. And beleive this has cured the issue.
-Chris Petrina
|
| "Alan E. Hennis" <Hennis_Alan_E AT cat DOT com>
Sent by: owner-nv-l AT lists.us.ibm DOT com
02/19/2004 01:13 PM
Please respond to nv-l
|
To: nv-l AT lists.us.ibm DOT com
cc:
Subject: Re: [nv-l] RE: Location.conf |
Why are you using 255 as the address pattern?
EUROPE_ATT_EVPN 255 SITE
Mauepas 1.1.1.1 Site EUROPE_ATT_EVPN
The documentation in location.conf use a 0.
# Location symbols can be used just for placeholders, in which case
you may
# specify 0 as the address pattern. In the following example, the
'Tivoli'
# location is simply used to hold other locations:
# Tivoli 0 State
# SalesOffices 146.84 "S. America" Tivoli
# "Development Offices" 146.92 City Tivoli
Also try clearing /usr/OV/log/location.log (i.e cp /dev/null
/usr/OV/log/location.log). Then look at the log to see any problems with
location.conf.
Thanks
Alan E. Hennis
Caterpillar Inc.
Systems+Process Division
309.494.3308
hennis_alan_e AT cat DOT com
"Christopher J
Petrina"
<cjp8@meadwestvac
o.com>
Sent by: To: nv-l AT lists.us.ibm DOT com
owner-nv-l@lists. cc:
us.ibm.com
02/19/2004 10:26 Subject: Re: [nv-l] RE: Location.conf
AM
Please respond to
nv-l
Caterpillar: Confidential Green Retain Until: 03/20/2004
Retention Category: G90 -
General
Matters/Administration
Just exited the GUI,
edited the location.conf file to add two new lcoations into the map
EUROPE_ATT_EVPN 255 SITE
Mauepas 1.1.1.1 Site EUROPE_ATT_EVPN
Neither of the sites show up on the map after I restart the GUI.
-Chris Petrina
P.S. Currently the support team is telling me that the IY48698 APAR fix
cannot be ordered.
________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service._______________________________________________________________
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [nv-l] RE: Location.conf, Christopher J Petrina
- Re: [nv-l] RE: Location.conf, Alan E. Hennis
- Re: [nv-l] RE: Location.conf, Christopher J Petrina
- Re: [nv-l] RE: Location.conf, Christopher J Petrina
- Re: [nv-l] RE: Location.conf, Alan E. Hennis
- Re: [nv-l] RE: Location.conf, Christopher J Petrina
- Re: [nv-l] RE: Location.conf, Christopher J Petrina
- Re: [nv-l] RE: Location.conf, Alan E. Hennis
- Re: [nv-l] RE: Location.conf,
Christopher J Petrina <=
- Re: [nv-l] RE: Location.conf, Alan E. Hennis
- Re: [nv-l] RE: Location.conf, Leslie Clark
|
|
|