RE: [nv-l] netmon.seed file

The new node discover option is Options->Topology/Status Polling Intervals: IP

Make sure you have "Discover New Nodes" selected, as well as the overall "Enable Polling and Discovery Settings."

I'm still not sure what the second option you mention does, but I just recently learned that it should be left to "Local Subnet."

Jason

-----Original Message-----
From: owner-nv-l AT lists.us.ibm DOT com [mailto:owner-nv-l AT lists.us.ibm DOT com] On Behalf Of Kevin Campbell
Sent: Wednesday, January 28, 2004 4:19 PM
To: nv-l AT lists.us.ibm DOT com
Subject: RE: [nv-l] netmon.seed file

1. Where can I turn discover new nodes on/off?

2. It is set to All Networks

-----Original Message-----
From: Christopher J Petrina [mailto:cjp8 AT meadwestvaco DOT com]
Sent: Wednesday, January 28, 2004 2:49 PM
To: nv-l AT lists.us.ibm DOT com
Subject: Re: [nv-l] netmon.seed file

Do you have discover new nodes turned on? CLI nmpolling. check in the serversetup config fro topology/discovery to see fi you are discovering local subnets only or all networks or backbone only

Previous by Date:	RE: [nv-l] netmon.seed file, Kevin Campbell
Next by Date:	RE: [nv-l] netmon.seed file, Michael Webb
Previous by Thread:	RE: [nv-l] netmon.seed file, Michael Webb
Next by Thread:	RE: [nv-l] netmon.seed file, Kevin Campbell
Indexes:	[Date] [Thread] [Top] [All Lists]