Re: [nv-l] HSRP interfaces

In my case it is a numbered interface. The duplicate interfaces have No Value for the object name.

Carlos

Paul <pstroud AT bellsouth DOT net>

09/23/2003 05:52 PM

To: CMazon AT commercebankfl DOT com, netview list good <nv-l AT lists.tivoli DOT com>
cc:
Subject: Re: [nv-l] HSRP interfaces

A 0.0.0.0 interface is usually an unnumbered interface, possibly a
frame-relay, backup
or aync interface of somekind. If it gets rediscovered, you could always
unmanage and
or hide the device. If it truely is an unnumbered interface, netmon will
be polling that
device via snmp so that it can check the status via the ifAdmin and
ifOper variables
provided by the snmp agent. That is the only way netmon can check the
status of an
unnumbered interface as it should not be pingable.

This is not generally an HSRP interface. HSRP interfaces are, at least
in every case I
have seen, numbered interfaces, generally used as the gateway address
for a subnet.

Paul

CMazon AT commercebankfl DOT com wrote:

>In my case it is an actual IP address that is pingable. It just shows 2-3
>times... I have tried to delete them but they get rediscovered the next
>day.
>
>
>Carlos
>
>
>
>
>Brian Kraftchick <Brian.Kraftchick AT odfl DOT com>
>09/23/2003 11:16 AM
>
> To: "NVList (E-mail)" <nv-l AT lists.tivoli DOT com>
> cc:
> Subject: RE: [nv-l] HSRP interfaces
>
>
>Allie,
>
>Same thing here.... 7.1.2 on Win2K.....several of our routers show
>multiple
>0.0.0.0 interfaces....I just assumed that those had something to do with
>the
>default routes defined in the routers themselves since that was the only
>place I had ever seen a legitimate reference to 0.0.0.0
>
>Brian
>
>-----Original Message-----
>From: Allie M Moran [mailto:allie AT lsu DOT edu]
>Sent: Tuesday, September 23, 2003 11:12 AM
>To: CMazon AT commercebankfl DOT com
>Cc: nv-l AT lists.tivoli DOT com
>Subject: Re: [nv-l] HSRP interfaces
>
>
>
>
>
>
>I have noticed the same thing. I also have multiple 0.0.0.0 interfaces.
>
>Netview 7.1.3 / AIX 5.1
>
>
>|---------+--------------------------->
>| | CMazon@commerceb|
>| | ankfl.com |
>| | |
>| | 09/19/2003 09:21|
>| | AM |
>| | |
>|---------+--------------------------->
>
>
>
>>---------------------------------------------------------------------------
>>
>>
>--------------------------------------------|
> |
>|
> | To: nv-l AT lists.tivoli DOT com
>|
> | cc: (bcc: Allie M Moran/allie/LSU)
>|
> | Subject: [nv-l] HSRP interfaces
>|
>
>
>
>>---------------------------------------------------------------------------
>>
>>
>--------------------------------------------|
>
>
>
>
>
>Hello List... Netview 7.1.3 / windows 2000
>
>I have 2 routers that keep rediscovering the HSRP interface on itself
>(duplicating) several times. At one point I will have the same interface 3
>or 4 times on that router, 1 up and the rest down but with no object name.
>I have HSRP on almost all our routers but this only occurs on 2 of them.
>Has anyone experienced this before? In my netmon.seed file these specific
>interfaces are listed as HSRP by IP address.
>
>
>Thanks
>
>Carlos
>
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
>For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
>
>*NOTE*
>This is not an Offical Tivoli Support forum. If you need immediate
>assistance from Tivoli please call the IBM Tivoli Software Group
>help line at 1-800-TIVOLI8(848-6548)
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
>For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
>
>*NOTE*
>This is not an Offical Tivoli Support forum. If you need immediate
>assistance from Tivoli please call the IBM Tivoli Software Group
>help line at 1-800-TIVOLI8(848-6548)
>
>
>
>
>