RE: [nv-l] Netview
2002-05-15 09:03:28
Sun turns on RIP routing by default if you do not update the /etc/defaultrouter
file - even with only one interface.
-----Original Message-----
From: Allison, Jason (JALLISON) [mailto:JALLISON AT arinc DOT com]
Sent: Tuesday, May 14, 2002 7:25 AM
To: 'nv-l'
Subject: RE: [nv-l] Netview
The Sun boxes I have worked with in the past with 2 NICs had IP forwarding
turned on by default.
No, I couldnt believe it either.
Jason Allison
Principal Engineer
ARINC Incorporated
Office: (410) 266-2006
FAX: (410) 573-3026
-----Original Message-----
From: James Shanks [mailto:jshanks AT us.ibm DOT com]
Sent: Tuesday, May 14, 2002 7:36 AM
To: nv-l AT lists.tivoli DOT com
Subject: Re: [nv-l] Netview
By definition, any device with at least two interface cards in different
networks, which also has IP forwarding turned on, is a router. That's what
NetView is telling you. You can turn off IP forwarding on that box and it
will no longer be a router, but you will probably have to delete and
rediscover it to get the map re-drawn. Or you can leave it one and
understand that it is NetView which is correct about what is, and what is
not, a router.
James Shanks
Level 3 Support for Tivoli NetView for UNIX and NT
Tivoli Software / IBM Software Group
Fission CC
Lin/Taiwan/IBM@IB To:
nv-l AT lists.tivoli DOT com
MTW cc:
Subject: [nv-l] Netview
05/13/02 12:05 AM
Dear all,
The Netview will recognize some servers (two interface cards) as routers
but actually not. Why ? In what situation that Netview will recognize
something as routers ? for example multiple interface cards ? or any
others? How could I reset them to ordinary servers? Please help,
thanks...
Best Regards,
Fission Lin, 林倩全
I / T Specialist , Tivoli Professional Services,
ITS/SMBU/NSM, IBM Taiwan
206, Sec.1 Keelung Rd, Taipei, Taiwan, R.O.C.
Tel:886-2-2725-8872, Mobile:0935-558622
E-Mail: flin AT tw.ibm DOT com
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [nv-l] Netview, Fission CC Lin
- Re: [nv-l] Netview, James Shanks
- RE: [nv-l] Netview, Allison, Jason (JALLISON)
- RE: [nv-l] Netview, Barr, Scott
- RE: [nv-l] Netview, Allison, Jason (JALLISON)
- RE: [nv-l] Netview, Leslie Clark
- RE: [nv-l] Netview, Allison, Jason (JALLISON)
- RE: [nv-l] Netview,
Barr, Scott <=
- RE: [nv-l] Netview, Barr, Scott
|
|
|