nv-l

Re: Tecad_nv6k is not starting up

2000-09-08 15:25:27
Subject: Re: Tecad_nv6k is not starting up
From: Dave_Finn AT computacenter DOT com
To: nv-l AT lists.tivoli DOT com
Date: Fri, 8 Sep 2000 20:25:27 +0100
Ray,

I suspect it is a problem with your ".conf" file.

Which adapter are you using tme or non-tme, it makes a difference to the Server
Name.

Is your TEC, NT or UNIX, if it is NT you need to specify the port (default
5529).

Dave





"Brizzi, Ray" <Ray_Brizzi AT anntaylor DOT com> on 07/09/2000 18:50:32

Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>




To:   "'IBM NetView Discussion'" <nv-l AT tkg DOT com>
cc:    (bcc: Dave Finn/COSS/CCenter)
Subject:  [NV-L] Tecad_nv6k is not starting up




We installed TEC adapter as per the release guide and everything ran
normally, but when we try to start tecad_nv6k, it says "NOT RUNNING".

The log shows [Started] so it must be failing after it starts.

Anything we might have missed?

Netview NT 6.0

Thanks, Ray
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l





**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.

This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.


<Prev in Thread] Current Thread [Next in Thread>