Leslie,
      There are no address ranges in the seed file, and this router just
started showing up a couple of days ago. The NetView server has been in
place for about 6 months now. However I see one of the interfaces is on the
same subnet  as the Netview server.  The NetView server address is
9.32.237.158 and the ping list shows the following addresses for that
router:
1237: 9.14.3.3 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.32.237.146 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.32.232.141 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.117.199.252 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.32.232.21 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.117.34.250 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.32.236.226 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.32.236.146 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.117.216.247 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.32.232.17 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.32.236.18 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.32.236.162 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.117.33.250 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1237: 9.32.236.2 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8
1238: 9.117.35.19 (pok918-3-sby002-2.nsnorth.ibm.com) list = 0x202868e8