I respect your knowledge of NetView.  I'm sure you're the best.
You must work with it full-time.  I do not.  I have to manage
to get by part-time.  So my knowledge and experience is limited.

I won't apologize for asking questions.  I do not know everything.
I do regret that you find this disturbing.

I will UNLIST from this server to make you happy.

I do want to thank those of you that help others and don't let it
disturb you like James Shanks.

Thanks,

Larry


> -----Original Message-----
> From: James Shanks [mailto:James_Shanks AT TIVOLI DOT COM]
> Sent: Monday, November 08, 1999 11:57 AM
> To: NV-L AT UCSBVM.ucsb DOT edu
> Subject: For your amusement ...
>
>
> OK, so you are a customer with enough of a TCP/IP network to
> buy and install
> NetView for NT.  Now can you imagine that you know so little
> about what you are
> doing that you go out to each of your routers and configure
> them to send all
> kinds of traps to NetView, but  you have to ask other people
> what they mean?
>
> Why would anyone be silly enough to send traps to NetView if
> they don't know
> what they mean?
>
> James Shanks
> Tivoli (NetView for UNIX) L3 Support
>
>
>
> "Chance, Larry" <lchance AT SFBCIC DOT COM> on 11/08/99 11:58:06 AM
>
> Please respond to Discussion of IBM NetView and POLYCENTER
> Manager on NetView
>       <NV-L AT UCSBVM.UCSB DOT EDU>
>
> To:   NV-L AT UCSBVM.UCSB DOT EDU
> cc:    (bcc: James Shanks/Tivoli Systems)
> Subject:  Frame Relay
>
>
>
>
> NetView for NT
>
> Would this trap indicate a physical problem on the serial
> interface of the
> router
> or is it an LMI status request from the router to the DLCI?
> It makes me think it is the router serial interface since it's DTE.
> Where can I reference the meanings of the Index and State?
>
> TRAP:
> frDLCIStatusChange:trap received from enterprise frame-relay-dte
> with 3 arguments:  frCircuitIfIndex=3;  frCircuitDlci=100;
> frCircuitState=3
>
> Thanks,
>
> Larry
>