Once you remove the bad bitmaps you need to do the following with all the
GUI's down.
 1. ovw_fields > /tmp/file1   :ensure that all field files have been read
and compiled.
 2. ovw_config > /tmp/file2   :ensure that all bitmap files have been read
and compiled.
 3. ovw_verify > /tmp/file3   :double check all field and registration
files.

Then restart the GUI's,  it you still get the message you need to check the
/tmp/file2 to determine what bitmap is still not compiling.

Thanks Mark Sklenarik
.
Tivoli NetView Product Integrity
.




"Froelich, Leah M" <leah.m.froelich AT LMCO DOT COM> on 06/10/99 09:42:36 AM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on
      NetView <NV-L AT UCSBVM.UCSB DOT EDU>

To:   NV-L AT UCSBVM.UCSB DOT EDU
cc:    (bcc: Mark Sklenarik/Tivoli Systems)
Subject:  Re: Netview 5.1 color problem, etc





I have already tried this and I still run out of colors occasionally.  Any
thoughts on the background error problem?

Leah

Leah Froelich
Lockheed Martin - Houston
leah.m.froelich AT lmco DOT com

> ----------
> From:         Brian Hwang[SMTP:bhwang AT TW.IBM DOT COM]
> Sent:         Wednesday, June 09, 1999 8:25 PM
> Subject:      Re: Netview 5.1 color problem, etc
>
> Try to set the number of color for CDE to the most colors.(in CDE panel)
>
>
> "Froelich, Leah M" <leah.m.froelich AT LMCO DOT COM> on 99/06/09 10:41:08 PM
>
> Please respond to Discussion of IBM NetView and POLYCENTER Manager on
>       NetView <NV-L AT UCSBVM.UCSB DOT EDU>
>
> To:   NV-L AT UCSBVM.UCSB DOT EDU
> cc:    (bcc: Brian CL Hwang/Taiwan/IBM)
> Subject:  Netview 5.1 color problem, etc
>
>
>
>
>         I have NetView 5.1 on an IBM RS6000 with AIX 4.3.  I also have
> CiscoWorks and CiscoView installed.  I get errors regarding colors
running
> out all the time.  The Graphics adapter I am using is a GTX255P.  What is
> the minumum graphics adapter that I need for this?  Or is there some
other
> solution that I can apply?
>         I also have the same problem that was posted several days ago
> regarding the Background error message.  I did delete the suggested files
> (wsc1600.20.m and wsc1600.20.p) and ran ovw -fields, but that didn't help
> the problem.  Could anyone else help me with some other pointers?
>
> Thanks a lot,
>
> Leah
> Leah Froelich
> Lockheed Martin - Houston
> leah.m.froelich AT lmco DOT com
>