I don't do netmon, so am I only reporting what I take to be the case.  I
know it could not work without a demand or config poll.  If your experience
is that this is not enough,  then I will bow to that.   Whether this is a
bug I will leave to someone else.  For an official opinion, you will have
to call Support.

James Shanks
Tivoli (NetView for UNIX) L3 Support



Scott Wilson <swilson AT rpm DOT com> on 10/19/98 11:01:31 AM

Please respond to swilson AT rpm DOT com

To:   James Shanks
cc:   NV-L AT UCSBVM.UCSB DOT EDU
Subject:  Re: Admin Down Interface





Actually, my experience has shown that if you have an AD interface that is
either reconfigured or removed, NetView will not delete that interface with
either a scheduled poll or a demand poll, it MUST be manually deleted and
rediscovered to get the correct IP and status.  It will however add
additional
interfaces to the device submap for the new IP of that interface though!  I
have seen multiple Serial0/0/0 interfaces for example each with a different
IP,
all AD.  Is this possibly a bug in my configuration James?  I had always
assumed that this was not a bug, that NV basically ignored AD interfaces.

James_Shanks AT TIVOLI DOT COM wrote:

> I believe this is a timing issue.  NetView will not be aware of  the
change
> until he does a config poll and the default time for that is once a day.
> So if you want anything before that you would have to delete and
rediscover
> or do a demand poll at least.
>
> James Shanks
> Tivoli (NetView for UNIX) L3 Support
>
> Simon Huang <SIMON.HUANG AT CHASE DOT COM> on 10/16/98 09:08:21 AM
>
> Please respond to Discussion of IBM NetView and POLYCENTER Manager on
>       NetView <NV-L AT UCSBVM.UCSB DOT EDU>
>
> To:   NV-L AT UCSBVM.UCSB DOT EDU
> cc:    (bcc: James Shanks)
> Subject:  Admin Down Interface
>
> Hi,
>
> When Netview discovers an interface that is administratively down, it
tags
> an "AD" to the end of the selection name of that interface.  My question
is
> when the interface is later changed from admin down to up (in the router
> config), will Netview automatically remove the AD tag?  Or we must
manually
> remove the interface and let Netview rediscover it with the correct
status?
>
> Thanks
>
> Simon Huang



--
-----------------------------------------------------------
Scott Wilson                         Email: swilson AT rpm DOT com
Network Management Consultant        Pager: 800-506-7348
RPM Consulting, Inc.
-----------------------------------------------------------