This is a multi-part message in MIME format.
------_=_NextPart_001_01C646B9.06174B39
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
The restore is not managed by what library owns the tape. A restore, by =
default, requests all tapes that contain the *primary* image for the =
data to be restored regardless of the location of the tape. If this =
offsite tape contains copies of images that are also on local tapes, =
then you need to change the onsite copies to be marked as the primary =
copies.
=20
There's a "bpchangeprimary" command for this.
=20
Depending on how you might be creating the copy, you can manage the =
"primary" tape designation using Vault, ITC, or bpduplicate.
=20
-M
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu =
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of Patricia =
Harmon
Sent: Monday, March 13, 2006 8:13 AM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Restore tape is being requested on the wrong tape =
library
I have a restore that is requesting 6 tapes, the 1st tape is loaded from =
tape library 2 and runs fine then the second tape gets requested from =
tape library 2 also even though the second tape is in tape library 1. =
The tape may have been in that library at one time but it is now in our =
off-site library(tape library 1) and the following commands verify that =
is in the off-site library. Everything shows robot 1 has tape S00054.=20
=20
Any ideas how I can make this restore look for each tape in its correct =
library?
=20
Thanks for any help.
Pat=20
=20
The admin GUI shows it in slot 154 of robot "1" =20
vmquery -m xxxxxxx =20
bpmedialist -m xxxxxxx
=20
09:06:57 (477880.xxx) Media id B00189 is needed for the restore. (Tape =
library 2)=20
09:06:57 (477880.xxx) Media id S00054 is needed for the restore. (Tape =
library 1)
09:06:57 (477880.xxx) Media id S00106 is needed for the restore.
09:06:57 (477880.xxx) Media id S00104 is needed for the restore.
09:06:57 (477880.xxx) Media id S00274 is needed for the restore.
------_=_NextPart_001_01C646B9.06174B39
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1515" name=3DGENERATOR></HEAD>
<BODY style=3D"MARGIN: 4px 4px 1px; FONT: 10pt Tahoma">
<DIV><SPAN class=3D518450616-13032006>The restore is not managed by what =
library=20
owns the tape. A restore, by default, requests all tapes that =
contain the=20
*primary* image for the data to be restored regardless of the location =
of the=20
tape. If this offsite tape contains copies of images that are also =
on local tapes, then you need to change the onsite copies to be =
marked as=20
the primary copies.</SPAN></DIV>
<DIV><SPAN class=3D518450616-13032006></SPAN> </DIV>
<DIV><SPAN class=3D518450616-13032006>There's a "bpchangeprimary" =
command for=20
this.</SPAN></DIV>
<DIV><SPAN class=3D518450616-13032006></SPAN> </DIV>
<DIV><SPAN class=3D518450616-13032006>Depending on how you might be =
creating the=20
copy, you can manage the "primary" tape designation using Vault, ITC, or =
bpduplicate.</SPAN></DIV>
<DIV><SPAN class=3D518450616-13032006></SPAN> </DIV>
<DIV><SPAN class=3D518450616-13032006>-M</SPAN></DIV>
<BLOCKQUOTE dir=3Dltr style=3D"MARGIN-RIGHT: 0px">
<DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft>-----Original =
Message-----<BR><B>From:</B> veritas-bu-admin AT mailman.eng.auburn DOT edu=20
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]<B>On Behalf Of =
</B>Patricia=20
Harmon<BR><B>Sent:</B> Monday, March 13, 2006 8:13 AM<BR><B>To:</B>=20
veritas-bu AT mailman.eng.auburn DOT edu<BR><B>Subject:</B> [Veritas-bu] =
Restore tape=20
is being requested on the wrong tape library<BR><BR></DIV>
<DIV>I have a restore that is requesting 6 tapes, the 1st tape is =
loaded=20
from tape library 2 and runs fine then the second tape gets requested =
from=20
tape library 2 also even though the second tape is in tape =
library 1. The=20
tape may have been in that library at one time but it is now in our =
off-site=20
library(tape library 1) and the following commands verify =
that is in=20
the off-site library. Everything shows robot 1 has tape =
S00054.=20
</DIV>
<DIV> </DIV>
<DIV>Any ideas how I can make this restore look for each tape in its =
correct=20
library?</DIV>
<DIV> </DIV>
<DIV>Thanks for any help.</DIV>
<DIV>Pat </DIV>
<DIV> </DIV>
<DIV>The admin GUI shows it in slot 154 of robot "1" =
</DIV>
<DIV>vmquery -m xxxxxxx </DIV>
<DIV>bpmedialist -m xxxxxxx</DIV>
<DIV> </DIV>
<DIV> 09:06:57 (477880.xxx) Media id B00189 is needed for the=20
restore. (Tape library 2) <BR>09:06:57 (477880.xxx) Media id=20
<STRONG>S00054</STRONG> is needed for the restore. (Tape =
library=20
1)<BR>09:06:57 (477880.xxx) Media id S00106 is needed for the=20
restore.<BR>09:06:57 (477880.xxx) Media id S00104 is needed for the=20
restore.<BR>09:06:57 (477880.xxx) Media id S00274 is needed for the=20
restore.</DIV></BLOCKQUOTE></BODY></HTML>
------_=_NextPart_001_01C646B9.06174B39--
|