[Networker] cloning save sets to LTO4 vs LTO2
2008-05-13 11:11:46
Networker 7.3.3
We currently do D2D2T. We have three 2TB partitions we back up to. We
then clone the Save Sets to tape in parallel from the three partitions
to three separate LTO2 drives. We probably average around 45MB/s to
each drive. We are planning on replacing our storage this fall and one
vendor has suggested we replace our Adic i2000 (6 LTO2 drives, nearly 4
years old, but rock solid) with a smaller library with LTO4 drives on
the thought of having more through put to the drives.
Since cloning save sets is single threaded to the drive, will I see a
significant increase in through put with LTO4 drives? We are planning
to increase our disk backup space from 6TB to at least 25TB.
Thanks -- Jon
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] cloning save sets to LTO4 vs LTO2,
Jon Fraley <=
|
|
|