Networker

Re: [Networker] Adding a Superloader3

2008-03-12 05:08:43
Subject: Re: [Networker] Adding a Superloader3
From: Nico De Ranter <nico AT SONYCOM DOT COM>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Wed, 12 Mar 2008 10:07:37 +0100
It's an LTO2 but I'm not sure which brand actually. I'll see whether I
can find anything there. Thanks.

Nico

On Wed, 2008-03-12 at 11:25 +1100, Peter Viertel wrote:
> What tape drives are they?   As you have sol10 on x64 then mpxio is
> enabled by default and it may be interfering with the creation of the
> rmt devices if they are HP LTO3. 
> 
> > -----Original Message-----
> > From: EMC NetWorker discussion 
> > [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Nico De Ranter
> > Sent: Wednesday, 12 March 2008 4:31 AM
> > To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> > Subject: Re: [Networker] Adding a Superloader3
> > 
> > Hmm, at least sjisn sees the tapedrive
> > 
> > Serial Number data for 1.5.1 (QUANTUM  UHDL            ):
> >         Library:
> >                 Serial Number: xxxxxxxxx
> >                 SCSI-3 Device Identifiers:
> >                         ATNN=QUANTUM UHDL            xxxxxxxxx
> >                         IENN=00E09EFFFF086AE9
> >                         WWNN=500E09EFFF086AE9
> >         Drive at element address 32:
> >                 SCSI-3 Device Identifiers:
> >                         VENN=xxxxxxxx
> > 
> > The serial numbers match my records.
> > 
> > Nico
> > 
> > On Tue, 2008-03-11 at 17:48 +0200, Catalin Scarlet wrote:
> > > Hi,
> > > 
> > > I had almost the same issue with solaris and inquire. Try 
> > to remove all records regarding tapes, reboot it and try 
> > again inquire.
> > > Try sjisn 1.5.1 too..
> > > 
> > > Regards,
> > > 
> > > Catalin Scarlet
> > > Senior Technical Engineer
> > > 
> > > -----Original Message-----
> > > From: EMC NetWorker discussion 
> > [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Michael Nored
> > > Sent: 11 martie 2008 15:00
> > > To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
> > > Subject: Re: [Networker] Adding a Superloader3
> > > 
> > > Since inquire did not come back with any drives it would 
> > seem that the OS is
> > > not seeing the tape drives, do you have any entries in the 
> > /dev/rmt dir?
> > > 
> > > Michael Nored
> > 
> > To sign off this list, send email to 
> > listserv AT listserv.temple DOT edu and type "signoff networker" in 
> > the body of the email. Please write to 
> > networker-request AT listserv.temple DOT edu if you have any 
> > problems with this list. You can access the archives at 
> > http://listserv.temple.edu/archives/networker.html or
> > via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
> > 
> 
> NOTICE
> This e-mail and any attachments are confidential and may contain copyright 
> material of Macquarie Group Limited or third parties. If you are not the 
> intended recipient of this email you should not read, print, re-transmit, 
> store or act in reliance on this e-mail or any attachments, and should 
> destroy all copies of them. Macquarie Group Limited does not guarantee the 
> integrity of any emails or any attached files. The views or opinions 
> expressed are the author's own and may not reflect the views or opinions of 
> Macquarie Group Limited.
> 
> To sign off this list, send email to listserv AT listserv.temple DOT edu and 
> type "signoff networker" in the body of the email. Please write to 
> networker-request AT listserv.temple DOT edu if you have any problems with 
> this list. You can access the archives at 
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER