Networker

Re: [Networker] Restore issues: nsrndmp_recover: NSR server <host>: busy

2008-03-10 09:08:40
Subject: Re: [Networker] Restore issues: nsrndmp_recover: NSR server <host>: busy
From: Fazil Saiyed <Fazil.Saiyed AT ANIXTER DOT COM>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Mon, 10 Mar 2008 08:02:06 -0500
Hello,
Was the scanner ran with -m option ?
Is your filer configured with DLT  drivers properly, is the SN attribute 
set and Filer client on the backup server configured with all it's NDMP 
options ?
Turn on NDMP debug on the filer ( ndmp debug 70) .
HTH



Mark Craven <mark.craven AT S3GROUP DOT COM> 
Sent by: EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
03/10/2008 06:25 AM
Please respond to
EMC NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>; Please respond 
to
Mark Craven <mark.craven AT S3GROUP DOT COM>


To
NETWORKER AT LISTSERV.TEMPLE DOT EDU
cc

Subject
[Networker] Restore issues: nsrndmp_recover: NSR server <host>: busy






Hi there

I'm doing some restores on our old backup system.  It's a Solaris 8
host running Networker 7.2 with a DLT drive. (our production system's
an LTO solution on Linux).  Our storage device is a NetApp filer.

I've brought up the old system, and have the tape I want to restore
from.  I can do an inventory and run "scanner" successfully.

When I try to do a restore, this happens:

root@plato 113# nsrndmp_recover -S 926585434 -c plato -s plato -R 
/nsr/Recovery/

I get this message
nsrndmp_recover: Performing recover from NDMP type of device
nsrndmp_recover: NSR server plato: busy
nsrndmp_recover: waiting 30 seconds then retrying...

and it seems to do this until I interrupt it.

Has anybody seen this before or have any tips/thoughts?

Thanks & Regards
Mark
-- 
_________________________________________________________________________

                   Mark Craven -  Senior Systems Engineer
_________________________________________________________________________

   IT Department                     Phone:     + 353-1-291-1314
   Silicon & Software Systems (S3)   Reception: + 353-1-291-1000
   South County Business Park        Fax:       + 353-1-291-1001
   Leopardstown                      E-mail:    Mark.Craven AT s3group DOT com
   Dublin 18                         Seri:      markc@irls3su1
   Ireland                           Web:       http://www.s3group.com
_________________________________________________________________________

The information contained in this e-mail and in any attachments is 
confidential and is designated solely for the attention of the intended 
recipient(s). If you are not an intended recipient, you must not use, 
disclose, copy, distribute or retain this e-mail or any part thereof. If 
you have received this e-mail in error, please notify the sender by return 
e-mail and delete all copies of this e-mail from your computer system(s).
Please direct any additional queries to: communications AT s3group DOT com.
Thank You.
Silicon and Software Systems Limited. Registered in Ireland no. 378073.
Registered Office: South County Business Park, Leopardstown, Dublin 18

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type 
"signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER



To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

<Prev in Thread] Current Thread [Next in Thread>