Re: [Networker] Install a remote Storage Node
2007-12-17 10:31:59
Hello,
I believe jbconfig -s server name for SN should configure Tape lib
attached to Site2.
Please double check the cmd and options for jbconfig man page, also please
review admin and install guide on Storage Nodes, Tape Lib, licensing and
Zoning etc.You will need to configure appropriate pools, devices, timers
etc depending on your requirement.
-s server
Specifies the controlling server, when jbconfig is being used from a
storage node. To define a
jukebox resident on a storage node, the jbconfig command must be run on
the storage node. See
nsr_storage_node(5) for additional information on storage nodes.
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|