when you run jbconfig, you have to specify the ndmp devices there as
such:

[your filer name]:nrst1a (NDMP) 

really! with the space and the (NDMP) - at least I did for the last
7.3.2 jbconfig I did

HTH
Jerry

-----Original Message-----
From: EMC NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On
Behalf Of Stan Horwitz
Sent: Thursday, October 18, 2007 8:56 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Problem with mmrecov after /nsr array failure

On Oct 18, 2007, at 5:54 AM, Macina, Conrad wrote:

> We've seen a similar problem in disaster recovery testing. The
> workaround is to stop NetWorker and delete the devices and jukebox  
> using
> nsradmin with NetWorker down.
>
> # nsr_shutdown
> # cd /nsr2
> # nsradmin -d res/nsrdb
> NetWorker administration program.
> Use the "help" command for help, "visual" for full-screen mode.
> nsradmin> . type:nsr device
> Current query set
> nsradmin> show name
> nsradmin> print
> The program displays a list of all defined devices
> nsradmin> delete
>                         name: /dev/rmt/Xcbn;
> Delete? y
> deleted resource id 0.170.99.85.63.30.111.108.170.116.34.57(23383)
> Repeat for each device
> nsradmin> . type:nsr jukebox
> Current query set
> nsradmin> show name
> nsradmin> print
> The program displays a list of all defined jukeboxes
> nsradmin> delete
>                         name: "rd=oldstoragenode:oldjukebox";
> Delete? y
> deleted resource id
> 1.41.66.32.0.0.0.0.0.0.0.0.65.88.118.224.170.116.34.57(5485)
> This repeats for each jukebox
> nsradmin> quit
>
> After completing this, start up NetWorker and run jbconfig.

Conrad; I went through this procedure and it worked, but its not  
quite right. I need to assign five of the 14 tape drives for NDMP and  
both the GUI and nsradmin say that the NDMP button in the tape  
resource is read only and cannot be changed. When I ran jbconfig, it  
asked if any of the devices were for NDMP and I said yet, but it  
never prompted me for the storage node name, password, and other info.

Does anyone have any ideas on how to fix this?

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems with this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER