EMC wont sent any timely support so let's see what happens if I post this here

I have a problem with SDLT tapes being used for 1 to max 10 % of their capacity 
(even if the tapes are brand new)

My site consists of 2 CX500 San's in mirror with a MSL5026 taperobot
This problem started one week after adding a second tape unit to the robot
The second tape unit had initial SCSI numbering problems but that was fixed 
withing an hour
I am running all this on Networker 7.1.2 and Windows 2000/2003 servers

Now it seems that the tapes are not fully being used
Any Help or idea is welcom

met vriendelijke groeten, / With kind regards,
Frank Terveen
Senior Systeembeheerder / Senior Systems Manager
Afdeling Gebruikersondersteuning Informatiesystemen  / Information Systems 
Division


Disclaimer:
http://www.afm.nl/disclaimer
http://www.afm.nl/disclaimer_english/
Indien u de link niet kunt openen, neemt u dan contact op met 
telefoonnummer +31 (0)20 7972000. Meer informatie vindt u op de 
website http://www.afm.nl.
If you are unable to access the link, please dial +31 (0)20 
7972000 
Additional information is available on the website 
http://www.afm.nl.

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the body of the email. Please write to 
networker-request AT listserv.temple DOT edu if you have any problems with this 
list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER