Re: [Networker] mmrecov trouble
2005-12-14 14:58:27
I think you block size is wrong. Mine is specified in KB, so for 128KB block
size, I have:
NSR_DEV_BLOCK_SIZE_LTO_ULTRIUM_2=128
-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]On Behalf Of Christo Papadoulis
Sent: Wednesday, December 14, 2005 1:41 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] mmrecov trouble
LTO uses variable block size just unset
NSR_DEV_TAPE_BLOCK_SIZE_LTO_ULTRIUM if set.
and also try tun CDI of (not use on edit device -> configuration)
try:
mt -f /dev/nst0
you should get a bock size of 0 (variable)
--Christo
Olaf Zaplinski wrote:
> Hi,
>
> I upgraded our Redhat 8 NW 7.1.3 server to Redhat Enterprise 3. I
> tried to do a bootstrap recovery, but it fails:
>
> Please insert the volume on which save set id 4188026194 started
> into /dev/nst0. When you have done this, press <RETURN>:
>
> Scanning /dev/nst0 for save set 4188026194; this may take a while...
> scanner: /dev/nst0: opened for reading
> scanner: /dev/nst0: opened for reading
> scanner: /dev/nst0: rewinding
> scanner: Rewinding done
> scanner: /dev/nst0: opened for reading
> scanner: /dev/nst0: opened for reading
> scanner: /dev/nst0: opened for reading
> scanner: /dev/nst0: rewinding
> scanner: Rewinding done
> scanner: /dev/nst0: opened for reading
> scanner: /dev/nst0: rewinding
> scanner: Rewinding done
> scanner: Reading the label...
> scanner: Reading the label done
> scanner: SYSTEM error: Tape label read for volume ? in pool ?, is not
> recognised by Networker: Input/output error
> scanner: /dev/nst0: rewinding
> scanner: Rewinding done
> scanner: Reading the label...
> scanner: Reading the label done
> scanner: SYSTEM error: Tape label read for volume ? in pool ?, is not
> recognised by Networker: Input/output error
> scanner: please enter record size for this volume (`q` to quit) [64]
>
>
> scanner also cannot tell me what block size this volume was written with:
> [root@r2d2 bind-9.3.1]# scanner -v /dev/nst0
> scanner: /dev/nst0: opened for reading
> scanner: /dev/nst0: rewinding
> scanner: Rewinding done
> scanner: Reading the label...
> scanner: Reading the label done
> scanner: SYSTEM error: Tape label read for volume ? in pool ?, is not
> recognised by Networker: Input/output error
> scanner: SYSTEM error: Tape label read for volume ? in pool ?, is not
> recognised by Networker: Input/output error
> scanner: scanning for valid records...
> scanner: read: -1 bytes : Input/output error
> scanner: /dev/nst0: opened for reading
> scanner: read: -1 bytes : Input/output error
> scanner: /dev/nst0: opened for reading
> [...]
>
>
> Kernel is self-built 2.4.32 (just like on the old system, the Redhat
> kernels are unusable on this Dell system). I also set
> NSR_DEV_TAPE_FILE_SIZE_LTO_ULTRIUM to 131072.
>
> Any ideas?
>
> Olaf
>
> To sign off this list, send email to listserv AT listserv.temple DOT edu and
> type "signoff networker" in the
> body of the email. Please write to
> networker-request AT listserv.temple DOT edu if you have any problems
> wit this list. You can access the archives at
> http://listserv.temple.edu/archives/networker.html or
> via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
>
--
________________________________________________________________________
Christo Papadoulis ITsquad GmbH & Co. KG
t office: +49 (0) 8131 27 20 62 4
t mobil: +49 (0) 172 89 51 43 3
t home office: +49 (0) 89 93 93 06 09
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if
you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|