Re: [Networker] AW: [Networker] Networker Problem: Unable to Receive from Cli ent side and Unable to send from server side
2005-12-09 14:24:12
hi ,
send me pls nsrsup
incident 1
I have same problem with nw 7.1.1 and this problem I have with
configuration with antivirus
Milan
Narkinsky, Brian wrote:
Have you checked your Duplex and your NIC drivers?
A couple of years ago there were some issues with Compaq NIC drivers that
caused RPC errors.
Brian
-----Original Message-----
From: Legato NetWorker discussion on behalf of Matthew Huff
Sent: Fri 12/9/2005 8:37 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Cc:
Subject: Re: [Networker] AW: [Networker] Networker Problem: Unable to
Receive from Cli ent side and Unable to send from server side
I second this. Also, if anything was added to the network stack, it
loads the drivers from the original NT software so the service pack levels
are out of sync. I'd rebind the protocol stack, reboot, and then re-apply the
latest NT service pack and reboot.
--
Matthew Huff | One Manhattanville Rd
Director of Operations | Purchase, NY 10577
OTA LLC | Phone: 914-460-4039
mailto:mhuff AT ox DOT com | Fax: 914-460-4139
-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Skinner,Alan
C(Contractor)
Sent: Friday, December 09, 2005 8:06 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] AW: [Networker] Networker Problem: Unable to
Receive from Cli ent side and Unable to send from server side
Every time I have an RPC error on a Windows box it has always come
down to the clients TCP/IP protocol, usually a winsocks error. If I read
correctly your client is a NT box. You will have to go into the TCP/IP
configuration and change something so that when you go to exit it will prompt
you to bind the protocol stack. Say yes and then reboot. No guarantee's just
a thought
Alan Skinner
Network Administrator
RAM, Inc.
609-562-6039
alan.skinner AT dix.army DOT mil
alan.skinner AT us.army DOT mil
-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of YUUNI, OSAY OSMAN
Sent: Friday, December 09, 2005 7:56 AM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: AW: [Networker] Networker Problem: Unable to Receive
from Client side and Unable to send from server side
Hi,
There are no firewalls involved with this client. Nsradmin -p
nsrexecd -s <clientname> with print, prints out the following information
about the
client:
nsradmin> print
type: NSRLA;
name: <clientname>;
version: "Legato NetWorker 7.1.3.Build.404 ";
servers: <servername>;
administrator: "group=Administrators,host=localhost",
"group=Administrators,host=<clientname>",
"isroot,host=<servername>";
arch: Windows 2000;
CPU type: INTEL_PENTIUM;
machine type: server;
OS: Windows 2000 5.0;
NetWorker version: 7.1.3.Build.404;
client OS type: Windows NT Server on Intel;
CPUs: 1;
MB used: 17147;
IP address: 192.168.140.28;
This confirms that the server talks to the client but I don't
understand why I keep getting the rpc error. What is strange is that it had
been working for months and with no changes made to either side it stopped
working.
------------------------------------
African Development Bank
YUUNI, Osay Osman
Snr Network Engineer
o.yuuni AT afdb DOT org
oyuuni AT ieee DOT org
13 Avenue du Ghana
BP 323
1002 Tunis Belvedere
Tunisia
tel: (216) 71102581
mobile: (216) 97 47 87 60
------------------------------------
-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] On Behalf Of Grohal, Klaus
Sent: Friday, December 09, 2005 12:19 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] AW: [Networker] Networker Problem: Unable to
Receive from Client side and Unable to send from server side
any firewals involved?
try from the server side: nsradmin -p nsrexecd -s <clientname>. then
"print", you should the the client resource now. If not the nsrexecd on both
side can't talk to each other.
regards
Klaus
-----Ursprüngliche Nachricht-----
Von: Legato NetWorker discussion
[mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] Im Auftrag von Osay Osman Yuuni
Gesendet: Freitag, 9. Dezember 2005 11:21
An: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Betreff: [Networker] Networker Problem: Unable to Receive from Client
side and Unable to send from server side
Hi,
I'm having a bizare problem with my set up here. Networker 713 for
windows has been working well but suddenly I'm unable to backup one of the
clients.
It always fails with a message of unable to send (RPC). I've tried
rpcinfo -p from both server and client and the necessary ports are listed.
I've tried connecting from the client side and I get an unable to receive
error.
I re-installed the client and I still get the same error. Can anyone
throw light on this for me please?
TIA.
To sign off this list, send email to listserv AT listserv.temple DOT
edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list.
You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT
edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list.
You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT
edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list.
You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT
edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list.
You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT
edu and
type "signoff networker" in the
body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
__________ Informacia od NOD32 1.1316 (20051208) __________
Tato sprava bola preverena antivirusovym systemom NOD32.
http://www.eset.sk
To sign off this list, send email to listserv AT listserv.temple DOT edu and type
"signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|
|
|