Date: Tue, 30 Aug 2005 12:33:30 -0700
From: Michael Coxe <mcoxe AT OPSWARE DOT COM>
Subject: Basic NDMP question - variation on previous post
What if the direct attached SCSI jukebox is attached to the
Legato Server instead of the NAS server?
In the following basic NDMP configuration:
NDMP
|-------------|
NAS w/NDMP Legato
Support Server
|-------direct attached
SCSI tape jukebox
Does the tape jukebox have to support NDMP?
Or can it be a non-NDMP SCSI jukebox?
Regards,
- michael coxe
mcoxe AT opsware DOT com
Michael Coxe wrote:
> I don't know why I don't know the answer to this.
> I should...but don't.
>
>
> Does the tape jukebox have to support NDMP?
> Or can it be a non-NDMP SCSI jukebox?
No, the jukebox does not have to support NDMP. You have a choice of how to
connect the robotic arm. It can get attached to the NAS server's SCSI
controller or the backup server's SCSI bus. When you run jbconfig, you will
choose which one it is. I think the choices are SCSI or NDMP jukebox (it
has been a while).
Either will work. I preferred to have it attached to the server, on its own
SCSI controller.
The tape drives that you attach to the SCSI card in the NAS server and
configured as NDMP tape drives.
I think that NetWorker wants to send the bootstrap information to a non
NDMP tape drive, at least in 7.1.1, do you have one available?
Hope it helps.
Pat
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu
if you have any problems
wit this list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER
|