Hello , all
This is Eric . and I have met a hard problem . some people have knew it . and I
am very appreciate for their help.
I repeat my environment at the following:
Host: SUN 280R
HBA card: Qlogic 2200F
FC Switch : Brocade 2800
Disk Array : HDS9900
Tape Library: ADIC Scalar 1000 with 2 LTO drivers + SNC bridge 5100
I have installed the LTO Tape Driver(IBMtape.4.0.5.9.bin) and the Qlogic HBA
card driver(qla2200_pkg_v406.Z) in the solaris , my brocade FC switch have no
Zoning configuration at all . and for now , when never I restart the machine ,
I can always see the HITACHI Disk Array , however I can not see the ADIC tape
drivers and the robot.
How ever, if I perform the command "#cfgadm -al" , show the following messages:
root@nxjf-65 # cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t6d0 CD-ROM connected configured unknown
c1 fc-private connected configured unknown
c1::21000004cf9f201d disk connected configured unknown
c1::21000004cfa32d68 disk connected configured unknown
c2 scsi-bus connected unconfigured unknown
c3 fc-fabric connected configured unknown
c3::20020060451710ee array-ctrl connected unconfigured unknown
c3::210000e08b042e8c unknown connected unconfigured unknown
c3::210000e08b042f8c unknown connected unconfigured unknown
c3::210000e08b05e75d unknown connected unconfigured unknown
c3::210000e08b05eb5d unknown connected unconfigured unknown
c3::500060e8029ddf10 disk connected configured unknown
c3::500060e8029ddf12 disk connected configured unknown
root@nxjf-65 #
and then if I perform the command "#cfgadm -c configure c3" , show the
following messages:
root@nxjf-65 # cfgadm -c configure c3
cfgadm: Library error: failed to create device node: 20020060451710ee: I/O error
Operation partially successful. Some failures seen
root@nxjf-65 #
at this moment, I can see the IBM LTO driver information from the
/var/adm/messages, as the following:
Oct 22 20:54:27 nxjf-65 pcisch: [ID 370704 kern.info] PCI-device: SUNW,m64B@1,
m640
Oct 22 20:54:27 nxjf-65 genunix: [ID 936769 kern.info] m640 is
/pci@8,700000/SUNW,m64B@1
Oct 22 20:54:27 nxjf-65 m64: [ID 308573 kern.info] m64#0: 1280x1024, 8M
mappable, rev 4752.27
Oct 22 20:54:29 nxjf-65 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Oct 22 20:54:29 nxjf-65 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Oct 22 20:55:20 nxjf-65 sendmail[246]: [ID 702911 mail.alert] unable to qualify
my own domain name (nxjf-65) --
using short name
Oct 22 20:59:10 nxjf-65 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Oct 22 20:59:10 nxjf-65 genunix: [ID 936769 kern.info] devinfo0 is
/pseudo/devinfo@0
Oct 22 21:00:53 nxjf-65 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0
(fcp0):
Oct 22 21:00:53 nxjf-65 Create devinfo failed
Oct 22 21:00:56 nxjf-65 scsi: [ID 365881 kern.info]
/pci@8,600000/SUNW,qlc@1/fp@0,0/st@w20020060451710ee,3 (st1
4):
Oct 22 21:00:56 nxjf-65 <IBM Ultrium LTO>
Oct 22 21:00:56 nxjf-65 scsi: [ID 799468 kern.info] st14 at fp1: name
w20020060451710ee,3, bus address 11400
Oct 22 21:00:56 nxjf-65 genunix: [ID 936769 kern.info] st14 is
/pci@8,600000/SUNW,qlc@1/fp@0,0/st@w200200604517
10ee,3
Oct 22 21:00:56 nxjf-65 genunix: [ID 408114 kern.info]
/pci@8,600000/SUNW,qlc@1/fp@0,0/st@w20020060451710ee,3 (
st14) online
Oct 22 21:00:56 nxjf-65 scsi: [ID 365881 kern.info]
/pci@8,600000/SUNW,qlc@1/fp@0,0/st@w20020060451710ee,2 (st1
5):
Oct 22 21:00:56 nxjf-65 <IBM Ultrium LTO>
Oct 22 21:00:56 nxjf-65 scsi: [ID 799468 kern.info] st15 at fp1: name
w20020060451710ee,2, bus address 11400
Oct 22 21:00:56 nxjf-65 genunix: [ID 936769 kern.info] st15 is
/pci@8,600000/SUNW,qlc@1/fp@0,0/st@w200200604517
10ee,2
Oct 22 21:00:56 nxjf-65 genunix: [ID 408114 kern.info]
/pci@8,600000/SUNW,qlc@1/fp@0,0/st@w20020060451710ee,2 (
st15) online
Oct 22 21:00:56 nxjf-65 scsi: [ID 243001 kern.info]
/pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp1):
Oct 22 21:00:56 nxjf-65 ndi_devi_online: failed for st: target=11400
lun=1 ffffffff
Oct 22 21:00:56 nxjf-65 scsi: [ID 243001 kern.warning] WARNING:
/pci@8,600000/SUNW,qlc@1/fp@0,0 (fcp1):
Oct 22 21:00:56 nxjf-65 Failed to create nodes for
pwwn=20020060451710ee; error=5
could anyone tell me how to solve the problem , or have the similiar experience.
Thanks a lot
Eric
|
