Hello,
First, I don't think you really want to do the add command,
unless you are going to manually label all those volumes.
Normally, if I remember correctly, when automatic labeling works,
Bacula will not only create a new volume, but it will label it,
and put the entry in the catalog. You should confirm this.
One thing you are definitely doing incorrectly is giving volumes
in two pools the same prefix. Bacula cannot have the same volume
in two pools. So you need to have different prefixes (other than
just "Vol-") for each pool. One suggestion would be to use the
MediaType as the prefix. That way, you would also know by the
Volume name, what pool it belongs to.
It is not clear why you have two pools, because the Volumes are
all mixed in the same physical directory. There is no problem
with that, but what is the purpose of two pools ?
An "llist Volumes" may give you a better idea of what is going
on.
Best regards,
Kern
On 07/11/2017 04:13 PM, Jose Alberto
wrote:
Hi.
When i use SD with Disk (SD, USB, NAS, SAN, etc).
I add volumen with the command: add
And i add for example 50 volumen.
Because (i view) the command label only add 1 volumen.
i use Label only when my SD is a Tape Library.
Note: you have 2 Autochanger:
FileChgr2 and FileChgr2
You must add volumen you should on the 2
Autochanger.
Sorry for my English.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users