Re: [Bacula-users] 7.4.x Device Resource, Alert Command documentation and usage
2017-04-18 13:06:53
On 18/04/17 21:19, bacula-users-request AT lists.sourceforge DOT net wrote:
> Date: Tue, 18 Apr 2017 09:15:37 +0200
> From: Francisco Javier Funes Nieto <esencia AT gmail DOT com>
> Subject: Re: [Bacula-users] 7.4.x Device Resource, Alert Command
> documentation and usage
> Cc: bacula-users <bacula-users AT lists.sourceforge DOT net>
> Message-ID:
> <CAKWep2XU7zBMeC-fouuO4xOb3TN5bzdSx4gbtwFpUY2K=9W7ag AT mail.gmail DOT
> com>
> Content-Type: text/plain; charset="utf-8"
>
> Did you check if the mtx package was installed on the system ?
>
> J.
>
> 2017-04-18 8:27 GMT+02:00 Charles <c AT charlesmatkinson DOT org>:
>
>> How should the sample Alert Command using tapeinfo be configured?
>>
>> In the Bacula Main Reference 7.4.3 (18 June 2016).pdf", section 18.3
>> "Device Resource" shows a sample Alert Command:
>>
>> Alert Command = "sh -c ?tapeinfo -f %c | grep TapeAlert?"
>>
>> That was copied and pasted into the Bacula conf but generated:
>>
>> Alert: -f: 1: -f: ?tapeinfo: not found
>> 3997 Bad alert command: sh -c ?tapeinfo -f /dev/sg5 | grep TapeAlert?:
>> ERR=Child exited with code 127.
>>
>> After changing the tapeinfo to /usr/sbin/tapeinfo the error messages
>> were similar.
>>
>> After changing the ? characters to ' characters the error messages were
>> similar.
>>
>> The difficulty was worked around by using an external script to simplify
>> the conf:
>>
>> Alert Command = "/usr/local/sbin/tapealert-for-bacula.sh"
>>
>> How should the sample command be configured?
Thanks Fransico
The mtx package is installed. At a command prompt ...
tapeinfo -f /dev/sg5 | grep TapeAlert
... runs without error as does:
sh -c 'tapeinfo -f /dev/sg5 | grep TapeAlert'
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [Bacula-users] 7.4.x Device Resource, Alert Command documentation and usage,
Charles <=
|
|
|