Bacula-users

Re: [Bacula-users] Virtual autochangers: how to "reserve" devices and "media type"

2016-07-01 10:06:50
Subject: Re: [Bacula-users] Virtual autochangers: how to "reserve" devices and "media type"
From: Josh Fisher <jfisher AT pvct DOT com>
To: bacula-users AT lists.sourceforge DOT net
Date: Fri, 1 Jul 2016 10:06:11 -0400



On 7/1/2016 5:17 AM, Area de Sistemas wrote:

Hi,

We have been using bacula with DISK BASED BACKUP during years (in a multi-pool, multi-device configuration)

Recently we have "redefined" the devices as autochangers according the Bacula documentation.

Although the "whole thing" appears to be running ok we have TWO questions:

1) In the previous "device mode", the MediaType of all defined devices was set as "File"...Now, in the "autochanger mode" I've also used the same MediaType "File" for ALL devices in ALL autochangers...

   * Is this right or  MUST I use a different MediaType for every autochanger (in all its devices)?


A different MediaType should be used for each autochanger. This is because a volume on one autochanger cannot be "loaded" into another, since the volume files are on different disks.

   * If I must use a different MediaType...the change implies some problem with existent volumes? Must I do/change something with the existent volumes?


Maybe not. If you also use different pools for each autochanger, so that each pool contains volumes from only one autochanger, then it might not matter. Jobs using a single pool would only ever use one autochanger. However, with pools that have volumes from more than one autochanger, there is a problem. A job is only assigned a single device to write on, so if the pool contains volumes that are on another device, then Bacula may select a volume that cannot be loaded into the assigned device. This is why the MediaType should be different for each autocahnger. It prevents Bacula from selecting a volume from a pool that cannot be used in the assigned device.

2) According Bacula documentation is possible to "reserve" a device in an autochanger setting the property "Autoselect=no" in that device definition but...

   * How can I force bacula to use these reserved devices for a restore command?

   * The Bacula documentation sais that this can be done but NOT HOW, and apparently the restore command (at least interactively) only permits specify the Storage, not the device...


Regards.
--


Jose Manuel Blanco.


Area de Sistemas
Servicio de las Tecnologias de la Informacion y Comunicaciones (STIC)
Universidad de Valladolid
Edificio Alfonso VIII, C/Real de Burgos s/n. 47011, Valladolid - ESPAÑA
Telefono: 983 18-6410, Fax: 983 423271
E-mail: sistemas AT uva DOT es


AVISO SOBRE CONFIDENCIALIDAD. La legislación española ampara el secreto de las comunicaciones. Este correo electrónico y sus anexos son estrictamente confidenciales. Si Vd. no es el destinatario del mismo, por favor, notifíquenoslo inmediatamente y destruya el original. No deberá copiar este mensaje ni sus anexos o usarlo para propósito alguno, ni divulgar su contenido a ninguna persona.
WARNING ABOUT CONFIDENCIALITY. Spanish law guarantees privacy in electronic communications.This message and its attachments are confidential. If you are not the intended recipient please, notify us inmediately and destroy or the original to us. You should not copy this message or use it for any purpose, nor disclose its content to any other person.




------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape


_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users

------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
<Prev in Thread] Current Thread [Next in Thread>