Odd. The volumes are in the correct drives, but their origination slots
changed. So, when they unload, they are put into the incorrect location.
One quick way to check whether it is the mtx-changer script is to exercise
the OS mtx command and see if it produces the same output.
Patti Clark
Linux System Administrator
R&D Systems Support Oak Ridge National Laboratory
On 2/21/15, 2:42 PM, "Kelley, Jared" <jkelley AT popcap DOT com> wrote:
>mtx-changer has a bug in the script or the interface wit the Amazon AWS
>storage gateway is the issue.
>
>Confirmed this by running mtx-changer manually from command line, twice.
>First time loading slot 30 into drive 0 and second time loading slot 20
>into drive 1.
>After first load, 30 is in drive 0. After the second load command was
>run, slot 20 was loaded into drive 0 and 30 moved to drive 1. However,
>the volumes are stying sticky to the
>drive they are loaded in as you can see below. So the slots are getting
>ordered numerically but the volumes stay put.
>
>root@ops-prd-backup01:/etc/bacula/scripts# ./mtx-changer /dev/sg13 load 30
>/dev/tape/by-path/ip-10.5.66.22\:3260-iscsi-iqn.1997-05.com.amazon\:sgw-20
>b
>85d49-tapedrive-01-lun-0-nst 0
>Loading media from Storage Element 30 into drie 0...done
>
>root@ops-prd-backup01:/etc/bacula/working# /etc/bacula/scripts/mtx-changer
>/dev/sg13 listall | head -10
>D:0:F:30:AAAC246881
>D:1:E
>D:2:E
>D:3:E
>D:4:E
>D:5:E
>D:6:E
>D:7:E
>D:8:E
>D:9:E
>
>
>
>
>root@ops-prd-backup01:/etc/bacula/scripts# ./mtx-changer /dev/sg13 load 20
>/dev/tape/by-path/ip-10.5.66.22\:3260-iscsi-iqn.1997-05.com.amazon\:sgw-20
>b
>85d49-tapedrive-0-lun0-nst 1
>Loading media from Storage Element 20 into drive 1...done
>
>root@ops-prd-backup01:/etc/bacula/working# /etc/bacula/scripts/mtx-changer
>/dev/sg13 listall | head -10
>D:0:F:20:AAAC246881
>D:1:F:30:AAAC276882
>D:2:E
>D:3:E
>D:4:E
>D:5:E
>D:6:E
>D:7:E
>D:8:E
>D:9:E
>
>
>
>
>
>
>
>On 2/18/15, 10:28 AM, "Kelley, Jared" <jkelley AT popcap DOT com> wrote:
>
>>Patricia,
>>I am ensuing device itegrity by using the /dev/tape/by-path/* in my
>>configs for each device.
>>
>>I have mounted the tapes as you suggested with perfect sync prior to
>>mounting using bconsole.
>>After the mount there are tapes out of sync comparing mtx and mtx-changer
>>command vs the mysql select query.
>>See mount commands below.
>>
>>*mount
>>Automatically selected Storage: Autochanger
>>Enter autochanger drive[0]: 0
>>Enter autochanger slot 18
>>3307 Issuing autochanger "unload slt 41, drive 0" command.
>>3304 Issuing autochanger "load slot 18, drive 0 command.
>>3305 Autochanger "load slot 18, drive 0", status is OK.
>>3001 Mounted Volume: AAAACD5F68
>>3001 Device ""Drive0"
>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-20
>>b
>>8
>>5d49-taperive-01-lun-0-nst)" is already mounted with Volume "AAAACDF68"
>>
>>*mount
>>Automatically selected Storage: Autochanger
>>Enter autochanger drive[0]: 1
>>nter autochanger slot 1
>>3304 Issuing autochanger "load slot 1, drive 1" command.
>>3305 Autochanger "load slot 1, drive 1", status is OK.
>>3001 Mounted Volume: AAAB0E63AB
>>3001 Device ""Drive1"
>>(/dev/tape/by-path/ip-10.5.66.22:3260-issi-iqn.1997-05.com.amazon:sgw-20b
>>8
>>5d49-tapedrive-0-lun-0-nst)" i mounted with Volume "AAAB0E63AB"
>>
>>*mount
>>Autoatically selected Storage: Autochanger
>>Enter autochanger drive[0] 2
>>Enter autochanger slot: 22
>>3304 Issuing autochanger "load slot 22, drive 2" command.
>>3305 Autochanger "load slot 22, drive 2", status is OK.
>>3001 Mounted Volume: AAAC2D6888
>>3001 Device ""Drive2"
>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.197-05.com.amazon:sgw-20
>>b
>>8
>>5d49-tapedrive-03-lun-0-nst)" i mounted with Volume "AAAC2D6888"
>>
>>*mount
>>Automatically selected Storage: Autochanger
>>Enter autochanger drive[0]: 3
>>Enter autochnger slot: 26
>>3304 Issuing autochanger "load slot 26, drive 3" command.3305 Autochanger
>>"load slot 26, drive 3", status is OK.
>>3001 Mounted Volume: AAAB3B609E
>>001 Device ""Drive3"
>>(dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iq.1997-05.com.amazon:sgw-20b
>>8
>>5d49-tapedrive-04-lun-0-nst)" is mounted with Volume "AAAB3B609E"
>>
>>*mount
>>Automatically selectedStorage: Autochanger
>>Enter autochanger drive[0]: 4
>>Enter autochanger slot: 9
>>3304 Issuing autochanger "load slot 19, drive 4" command.
>>3305 Autochange "load slot 19, drive 4", status is OK.
>>3001 Mounted olume: AAAC216884
>>3001 Device ""Drive4"
>>(/dev/tape/by-path/ip-10.5.66.22:3260-scsi-iqn.1997-05.com.amazon:sgw-20b
>>8
>>5d49-tapedrive-05-lun-0-nst)" is monted with Volume "AAAC216884"
>>
>>*mount
>>Automatically selected Storage: Autocanger
>>Enter autochanger drive[0]: 5
>>Enter atochanger slot: 7
>>3304Issuing autochanger "load slot 7, drive 5" command.
>>3305 Autochanger "lad slot 7 drive 5", status is OK.
>>3001 Mounted Volume: AAADB06915
>>3001 Dvice ""Drive5"
>>(dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.comamazon:sgw-20b8
>>5d49-tapedrive-06-lun-0-nst)" is alrady mounted wit Volume "AAADB06915"
>>
>>
>>mysql query shows what exactly what the mount commad was told to do.
>>
>>
>>mysql> Select VolumeName,Slot from bacula.Media wher slot like 1 or slot
>>like 7 r slot like 18 or slot like 19 or slot like 2 or slot like 26
>>order by slot;
>>+------------+------+
>>| VolumeName | Slot |+------------+------+
>>| AAAB0E63AB | 1 | (drive 1)
>>| AAADB06915 | 7 | (drive 5)
>>| AAAACDF68 | 18 | (drive 0)
>>| AAAC216884 | 19 | (drive 4)
>>| AAAC2D6888 | 2 | (drive 2)
>>| AAAB3B609E | 26 | (drive 3)
>>+------------+------+
>>
>>
>>Hwever, I now see what is happening. Based on what mtx-changer showsthe
>>slots are getting reordered numerically from lowest to highest,
>>1,,8,19,22,26
>>but the volumes are stayng with the drive they were mounted in. So it
>>would seem at this point that bacula i doing what it should be and the
>>slots are getting re-ordered in the process when a new slot is mounted.
>>It is always inserted numerically in order.
>>
>>
>>/etc/bacula/scripts/tx-changer /dev/sg13 listall | head -10
>>
>>D:0:F:1:AAAACD5F68
>>D:1:F:7:AAAB0E63AB
>>D:2:F:18:AAAC2D6888
>>D:3:F:19:AAAB3B609E
>>D:4:F:2:AAAC216884
>>D:5:F:26:AAAD06915
>>
>>
>>/etc/bacula/scripts/mtx-changer /dev/sg13 list | had -10
>>
>>
>>1:AAAACD5F68
>>7:AAAB0E63AB
>>18:AAAC2D6888
>>19:AAAB3B609E
>>22:AAAC216884
>>26:AAADB06915
>>
>>
>>Now when I mount slot 3 in drive 6. Slot 3 will be put into drive 1,
>moving all the rest of them up one drive.
>>
>>
>>*mount
>>Automaticaly selected Storage: Autochanger
>>6
>>Enter autocanger slot: 3
>>3304Issuing autochanger "load slot 3, drive 6" command.
>>3305 Autochanger "load slot 3, drive 6", status is OK.
>>3001 Mounted Volume: AAAACE5F6B
>>3001 Device ""Drive6"
>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-20
>>b
>>8
>>5d49-tapedrive-07-lun-0-nst)" is mounted with Volume "AAAACE5F6B"
>>
>>
>>/etc/bacula/scripts/mtx-changer /dev/sg13 listall | head 10
>>
>>D:0:F:1:AAAACD5F68
>>D:1:F:3:AAAB0E63AB
>>D:2:F:7:AAAC2D6888
>>D:3:F:18:AAAB3B609E
>>D:4:F:19:AAAC216884
>>D:5:F:22:AAADB06915
>>D6:F:26:AAAACE5F6B - most recent mount, volume stays sticky but slot is
>>oved to drive one to keep the slots in numerical order, i.e. 3 falls
>>between 1 and 7 s that’s where slot 3 gets set.
>>
>>mtx status shows the same as mtx-changer
>>>root@ops-prd-backup01:/home/jkelley# mtx -f /dev/sg13 status | head -11
>> Storage Changer /dev/sg13:10 Drives, 3200 Slots ( 100 Import/Export )
>>Data Transfer Element 0:Full (Storage Element 1 Loade):VolumeTag =
>>AAAACD5F68
>>Data Transfer Element 1:Full(Storae Element3 Loaded):VolumeTag =
>>AAAB0E63AB
>>Data Transfer Element 2:Full (Stoage Element 7 Loaded):VolumeTag =
>>AAAC2D6888
>>Data ransfer Element 3:Full (Storage Element 18 Loaded):VolumeTag =
>>AAAB3B609E >Data Transfer Element 4:Full (Storage Elemen 19
>>Loaded):VolumeTag =
>>AAC216884
>>ata Transfr Element 5:Full (Storage Element 22 Loaded):olumeTag =
>>AAADB06915
>>Data Transfer Element 6:Full (Storage Elment 26 Loaded):VolumeTag =
>>AAAACE5F6B
>>
>>
>>
>>
>>So, this appear o be a bug with the mtx-changer script.
>>I haven’t poured through the scrip yet to determine exactly why it is
>moving the slots around to satisy numerical order.
>>If there are any updates o someone knows a quick fix itwould be much
>>appreciated.
>>
>>That’s all I have on this issue at the momnt.
>>
>>
>>
>>
>>
>>
>>
>>On 2/16/15, 7:37 AM, "Clark, Patricia A." <clarkpa AT ornl DOT ov> wrote:
>>
>>>How are you ensuring that your devices retain persistent aming?
>>>
>>>Please check the following once bacula and mtx changer list agree on
>>>tape
>>>location:
>>>
>>>Whil no jobs are running and using bconsole, mount one tape to each of
>>>your ape drives until all of your drives are completely loaded. Verify
>>>that te tapes in the drives are as expected in bconsole.
>>>Example from mybconsole:
>>>
>>>Used Volume status:
>>>
>>>Reserved volume: 077099L5 on ae device "LTO5-6" (/dev/tape-admin6)
>>>
>>> Reader=0 writers=0 reserves=1 volinuse=1
>>>
>>>Reserved volume: 156751L5 on tape devie "LTO5-3" (/dev/tape-admin3)
>>>
>>> Reader=0 writers=1 reserves=0 volinuse=1
>>>
>>>Reserved volume: 156759L5 on tape device "LTO5-2" (/dev/tape-admin2)
>>>
>>> Reader=0 writers=1 rserves=0 volinuse=1
>>>
>>>Using the OS mtx command status, do the tapes and drives match up with
>>>bconsole's output?
>>>Example from my mtx output:
>>>
>>># mtx -f /dev/hanger-admin status
>>>
>>> Storage Changer /dev/chnger-admin:7 Drives, 320 Slots ( 10
>>>Import/Export )
>>>
>>>Data Transfer Element 0:Empty
>>>
>>>Data Transfer Element 1:Empty
>>>
>>>Data Transfer Elemnt 2:Full (Storage Element 220 Loded):VolumeTag =
>>>156759L5
>>>
>>>Data Transfer Element 3:Full (Strage Element 212 Loaded):VolumeTag =
>>>156751L5>>>
>>>Data Transfer Element 4:Empty
>>>
>>>Data Transfer Element 5:Empty
>>>
>>>Data Transfer Element 6:Full (Storage Element 180 Loaded):VolumeTag =
>>>077099L5
>>>
>>><clipped>
>>>
>>>As you can see, my outpu aligns with on both sides. Please let us know
>>>what your results are.
>>>
>>>Patti Clark
>>>Linux System Administrator
>>>R&D Systems Support Oak Ridge National Laboratory
>>>
>>>From: <Kelley>, Jared <kelley AT popcap DOT com<mailto:jkelley AT popcap DOT
>>>com>>
>>>Date: Wednesday, February 11, 2015 at 6:27 PM
>>>To: "Kelley, Jared" <jkelley AT popca DOT com<mailto:jkelley AT popcap DOT
>>>com>>,
>>>Süleyman Kuran <[email protected]<maito:skuran AT ayk.gov DOT tr>>, "\"Ana
>>>Emília M. Arruda\""
>>><emiliaarruda AT gmail DOT com<mailto:emiiaarruda AT gmail DOT com>>
>>>Cc:
>>>"Bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>e
>>>.
>>>net>"
>>><bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>e
>>.
>>>net>>
>>>Subject: Re: [Bacula-users] bacula can't make use of multi dives
>>>
>>>bumping this thread because I have another issue I am unable o resolv.
>>>I am running:
>>>bacula 7.0.5 compiled from source
>>> 3 pools.
>>>Multiple jobs per pool.
>>>10 tape drives
>>>1 autochanger for those 10drives.
>>>1600 slots
>>>
>>>running concurrent jobs works.
>>>I have 41 volumes(taps) in the virtual changer with 10 drives.
>>>Bacula is getting confused ery quickly on which volume is in which
>>>slot>>when comparing whats in thebacula database,
>>>as shown by select query, compared to the output of mx-changer —list
>>>all
>>>command. See below.
>>>So as these volumes get moe and more out of sync my jobs get hung with
>>>waiting to mount volumewhich cascades to exceeding max jobs
>>>as the running jobs start to queue. Im wondering if this is a bug due
>>>to the number of slots.
>>>The fix isto rlease all 10 drives, run update slots. But I am having
>>>to do this daily nw. Unacceptable.
>>>When I was setting this up I started ith only 10 vitual tapes or
>>>volumes and things ran smoothly.
>>>Now I have added a 31 more tpes to prevent jobs from failing, if all
>>>the tapes in a pool become full, and the problem has been exacerbatd by
>>>the increasing the number volumes.
>>>It seems bacula is unable to andle this many slots and as it moves a
>>>volume bck to the slot from whece it came to pull another for a
>>>different job
>>>and it puts the tape(vlume) back into a different slot but gets
>>>confused
>>>and Slot in thedatabase is now wrong for this particular volume.
>>>Does anyone have any experience with this? And is there a possible
>>>configuratio fix?
>>>My max concurrent jobs is 20 for SD and max concurrent jobs per
>>>tapedrive
>>> is 1. This to eep jbs from interleaving data when they are writing
>>>concurrently.
>>>I will be happy to submit configuration files if that is helpful.
>>>Thanks
>>>
>>>Volumes in red are the volumes bacula is now out of sync with. Every
>>>one
>>>of these volumes is currently in a tape-drive. I have edited the output
>>>elow for simplicity in comparing mtx-changer command vs mysql select
>>>query.
>>>
>>>
>>>Select VolumeName,Slot from Media order by slot; slot out put
>>>from mtx canger --list all
>>>AAAC236886 1 AAAC236886
>>>AAAACC5F69 2 AAAACC5F69
>>>AAAACE5F6B 3 AAAACE5F6B
>>>AAAAD55F70 4 AAAAD55F70
>>>AAAB1763B2 5 AAAB1763B2
>>>AAAACA5F6F 6 AAAACA5F6F
>>>AAAACD5F68 7 AAAACD5F68
>>>AAAB0B63AE 8 AAAB0B63AE
>>>AAAB1463B1 9 AAAB163B1
>>>AAAACF5F6A 10 AAAACF5F6A
>>>AAAAC95F6C 11 AAAAC95F6C
>>>AAAB0963AC 12 AAAB0963AC
>>>AAAAC85F6D 13 AAAAC85F6D
>>>AAAAD45F71 14 AAAAD45F71
>>>AAAC2D6888 15 AAAC226887
>>>AAACDA687F 16 AAAC216884
>>>AAAB0863AD 17 AAAB0863AD
>>>AAAC256880 18 AAAC256880
>>>AAAB0F63AA 19 AAAB0F63AA
>>>AAAC226887 20 AAADBB691E
>>>AAAC206885 21 AAAC206885
>>>AAAB1563B0 22 AAB1563B0
>>>AAAB1663B3 23 AAAB1663B3
>>>AAAB3B609E 24 AAACDA687F
>>>AAAB0E63AB 25 AAAB0E63AB
>>>AAADB06915 26 AAADB06915
>>>AAAB0A63AF 27 AAAB0A63AF
>>>AAAC216884 28 AAAB3B609E
>>>AAAACB5F6E 29 AAAACB5F6E
>>>AAAC246881 30 AAAC246881
>>>AAAC276882 31 AAAC276882
>>>AAAC266883 32 AAAC2D6888
>>>AAADB9691C 33 AAADB9691C
>>>AAADBD6918 34 AAADBD6918
>>>AAADB8691D 35 AAADB8691D
>>AAADB36916 36 AAADB36916
>>>AAADBE691B 37 AAADBE691B>AAADBB691E 38 AAAC266883
>>>AAADBF691A 39 AAABF691A
>>>AAADBC6919 40 AAADBC6919
>>>AAADB26917 41 AAAB26917
>>
>>>From: <Kelley>, "Kelley, Jared"
>>><jkelley AT popcap DOT com<mailto:jkeley AT popcap DOT com>>
>>>Date: Wednesday, Deceber 17, 2014 at 12:36 PM
>>>To: üleyman Kuran <skuran AT ayk.gov DOT tr<mailto:skuran AT ayk.gov DOT
>>>tr>>, "\"Ana
>>>Emíia M. Arruda\""
>>><emiliaarruda AT gmail DOT com<mailto:emiliaarruda AT gmail DOT com>>
>>>Cc:
>>>"Bacula-users AT lists.sourceforge DOT
>>>net<mailo:[email protected]
>>>.
>>>net>"
>>><[email protected]<mailto:[email protected]
>>>.
>>>net>>
>>>Subject: Re: [Bacula-users] bacula can't make use of multi drives
>>>
>>>OK, I was ablet get this working.
>>>One of the major factors was upgrading my vrsion of bacula from 5.2.6 to
>>>7.0.5.
>>>It appears there is a bug in 5.26 in which bacula gets confused with
>>>regards to which tape(volume) is in wich drive and/or slot.
>>>with 5.2.6, with my config files working, after backups ran for a few
>>>days the slots no longer matched inbacula with what tx-changer listall
>>>told me from command line and I was getting lots of erors and backups
>>>hanging.
>>>
>>>After upgrading to 7.0.5 I no longer had ths problem and my backups are
>>>running smoothly on 10 different drives using 3 different pools.
>>>All is good for me here using multi drive configuration.
>>>
>>>Thanks to Ana for extensive help to get this working.
>>>
>>>
>>>Jared>
>>>
>>>From: Sleyman Kuran <skuran AT ayk.gov DOT tr<mailto:skuran AT ayk.gov DOT
>>>tr>>
>>>Date:Tuesday, November 25, 2014 at 11:15 PM
>>>To: "\"Ana Emília M. Arruda\""
>>><emiliaarruda AT gmail DOT com<mailto:miliaarruda AT gmail DOT com>>
>>>Cc:
>>>"Bacula-users AT lists.sourceforg DOT
>>>net<mailto:[email protected]
>>>.
>>>net>"
>>><bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>e
>>>.
>>>net>>
>>>Subject: Re: [Bacula-users] bacula can't make use of multi drives
>>>
>>>Thank for your reply.
>>>
>>>My autochanger device definition in bacula-sd.conf is as follows. I
>>>removed unrelated changer commands in Drive resource directives as you
>>>suggested, maybe those direcives mess up bacula, I will see what
>>>happens.
>>>
>>>Autochanger {
>>> Name = AYKAutochanger
>>> Device = Drive-1
>>> Device Drive-2
>>> Device = Drive-3
>> Device = Drive-4
>>> Changer Command = "/usr/libexc/bacula/mtx-changer %c %o %S %a %d"
>>> Changer Devic = /dev/sg9
>>>}
>>>>Best regards,
>>>
>>>
>>>On 25-11-2014 18:25, Ana Emília M. Arruda wrote:
>>>Hello,
>>>
>>>Do you have an autochanger device definition in your bacula-sd.conf?
>>>
>>>Autochanger {
>>>Name = "AYKAutochanger"
>>>Device = Drive-1, Drie-2, Drive-3, Drive-4
>>>Changer Device = /dev/sg9
>>Changer Command = "/usr/lbexec/bacula/mtx-changer %c %o %S %a %d"
>>>}
>>>
>>>In your Drives definitions, you don´t need tohave Changer Device nor
>>>Changer Command defined. The bellow lines should be emoved from your
>>>drives definitions:
>>>
>>> Changer Command = "/usr/libeec/bacula/mtx-changer %c %o %S %a %d"
>>># Changer Device = /dev/hanger
>>> Changer Device = /dev/sg9
>>> AutoChanger = yes
>>>
>>>Best regard,
>>>Ana
>>>
>>>On Tue, Nov 25, 2014 at 5:46 AM, Süleyman Kuran
>>><[email protected]<mailto:skuran AT ayk.gov DOT tr>> wrote:
>>>I still can't find the final ke to my puzzle :)
>>>
>>>Jobs (from the same pool) are stll waiting the firt drive to finish. I
>>>followed Ana's advise and set ax Concurrent Jobs = 1 in the Device
>>>directive in bacula-sd.con nd other configs in bacula-dir.conf The
>>>following are related prts o config files. Please advice.
>>>
>>>Best regards,
>>>
>>>bacula-sd.conf
>>================================================
>>>...
>>>Storage { # definition of myself
>>> Name = bacula-sd
>>> SDPort 9103 # Director's port
>>> WorkingDirectory = "/var/spool/bacula"
>>> Pid Directory = "/var/run"
>>> Maxium Concurrent Jobs = 20
>>>}
>>>Device {
>>> Name = Drive-1
>>> Drive Index =0
>>> Media Type = LTO-5
>>> Archive Device = /dev/nst0
>>> AutomaticMount = yes
>>> AwaysOpen = yes
>>> RemovabeMedia = yes
>>> Random Acess = no
>>> Maximum File Size = 10GB
>>> Changer Comand = "/usr/ibexec/bacula/mtx-changer %c %o %S %a %d"
>>># Chnger Device = /dev/chaner
>>> Changer Device = /dev/sg9
>>> AutoChanger = yes
>>>## # Enable th Alert command only if you have the mtx package loaded
>>> Alert Command = "h -c 'tapeinfo -f %c |grep TapeAlert|ca'"
>>>### If you have smartctl, enable this, t has more info than tapeinfo
>>> #Alert Command = "sh -c 'smarttl -H -l rror %c'"
>>> Maximum Concurrent Jobs = 1
>>>}
>>>Device {
>>> Name = Drive-
>>> Drive Index = 1
>>> Media Type = LTO-5
>>> Archive Device = /dev/nst1
>>> AutomaticMount = yes
>>> AlwaysOpen = yes
>>> RemovableMedia = yes
>>> Random Access = no
>>> Maximum File Size = 10GB
>>> Changer Command "/usr/ibexec/bacula/mtx-changer %c %o %S %a %d"
>>># Changer Device = /dev/changer
>>> Changer Device = /dev/sg9
>>> AutoChanger = yes
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAler|cat'"
>>> Maximum Concurrent Jobs = 1
>>>}
>>>Device {
>>> Name= Drive-3
>>> Drive Index = 2
>>> Media Type = LTO-5
>>> Archive Device = /dev/nst2
>>> AutomaticMount = yes
>>> AlwaysOpen = yes
>>> RemovableMedia = yes
>>> Random Access = no
>>> Maximum File Size = 10GB
>>> Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
>>># Changer Device = /dev/changer
>>> Changer Device = /dev/sg9
>>> AutoChanger = yes
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>> Maximum Concurrent Jobs = 1
>>>}
>>>Device {
>>> Name Drive-4
>>> Drive Index = 3
>>> Media Type = LTO-5
>> Archive Device = /dev/nst3
>>> AutomaticMount = yes
>>> AlwaysOpen = yes
>>> RemvableMedia = yes
>>> Random Access = no
>>> Maximum File Size = 10GB
>>> Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
>>># Changer Device = /dev/changer
>>> Changer Device = /dev/sg9
>>> AutoChanger = yes
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'">>
>>>Maximum Concurrent Jobs = 1
>>>}
>>>...
>>>=================================================================
>>>bacula-dir.conf
>>>...
>>>Storage {
>>> Name = "Fujitsu ETRNUS LT60"
>>> Address = fqdn.bacula.tld # N.B. Use a fully qualified
>>name here
>>> SDPort = 9103
>>> Password = "mypass" # passwor for Storage daemon
>>> Device = AYKAutochanger
>>> Media Type = TO-5 # must be same as MediaType in
>>>Storage daemon
>>> Autochanger = yes # enable for autochanger device
>>> Maimum Concurrent Jobs = 20
>>>}
>>>Director { define myself
>>> Name = bacula-dir
>>> DIRport = 9101 # here we listen for UA connections
>>> #QueryFile = "/usr/libexec/baula/query.sql"
>>> QueryFile = "/etc/bacula/query.sql">> Workingirectory =
>>>"/var/spool/bacula"
>>> PidDirectory = "/va/run"
>>> Maxium Concurrent Jobs = 20
>>> Password = "mypasswd" # Console pasword
>>> Messages = Daemon
>>>}
>>>Client {
>>> Name = bacul-fd
>>> Address =localhost
>>> FDPort = 9102
>>> Catalog = MyCatalog
>>> Pasword = "mypaswd" # password for FileDaemon
>>> Maximum Concurrent Jobs = 20
>>>}
>>>
>>>
>>>
>>>
>>>On 21-11-2014 01:27, Keley, Jared wrote:
>>>Yep, that was the final key to the puzzle. SUCCESS!!
>>Thak you so much for your help with this.
>>>I’m running test jobs now with the new etting and I’m 4 jobs from same
>>>pool are writing to
>>>4 differen drives and volumes concurrently.
>>>Agin, your help is much apprecated.
>>>
>>>Thank you
>>>
>>>Jared
>>
>>>From: "Ana Emília M. Arruda"
>><emiliaarruda AT gmail DOT com<mailto:emiliaarruda AT gmail DOT com>>
>>>Date: Thursday November 20, 2014 at 1:39 PM
>>>To: "Kelley, Jared" <jkelley AT popcap DOT com<mailt:jkelley AT popcap DOT
>>>com>>
>>>Cc: bacula-users
>>><bacula-users AT lists.sourceforge DOT
>>>net<[email protected]
>>>e
>>>.
>>>net>>
>>>Subject: Re: [Bacula-usrs] bacula can't make use of multi drives
>>>
>>>Hi Jared,
>>>
>>>Try settig
>>>
>>>Maximum Concurrent Jobs = 1
>>>in each device definition. This will spread your 4 jobs in 4 drives of
>>>your autochanger device.
>>>
>>>
>>>
>>>Device {
>>>
>>> Name = Drive0
>>>
>>> Drive Index = 0
>>>
>>> Media Type = LO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-IPiscsi-iqn.1997-05.com.amazonsgw-20b85d49-tapedri
>>>v
>>>e
>>>-01-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device pened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMeda = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>>
>>>
>>>
>>>Maximum Concurrent Jobs = 1
>>>
>>>}
>>>
>>>Best regards,
>>>Ana
>>>
>>>
>>>On Thu, Nov 20, 2014 at 6:33 PM, Kelley, Jared
>>><jkelley AT popcap DOT com<mailto:jkelley AT popcap DOT com>> wrote:
>>>Ok, I’ve done some reconfguring. Will paste my new configuration
>>>files
>>below as well as bconsole output from show pools, list volumes, status
>>>storage andquerying volumes per job. I am running 4 concurrent jobs to
>>>the samepool and the writes are still interleaving data to the same
>>>volume.
>>>I stopped and started bacula-sd, dir and fd, ran update slots scan
>>>before kicking off these jobs. Status storage shows the new device
>>>names
>>>nd things are working, aside from the single tape being written to by
>>>al 4 jobs.
>>>
>>>Still not sure where I’m going wrong with bacula and writing to multiple
>>>volumes at the same time from the same pool. Currently the only way
>>>I’ve
>>>achieved tis with mixed results, i.e. success and failures, is with
>>>‘prefer mounted volmes = no.
>>>:\
>>>
>>>############# BEGIN BACULA-SD.CONF ###########
>>>
>>>
>>>SEA-12176-MAC:backup02_bacula jkelley$ cat bacula-sd.conf>>>
>>>#
>>>
>>># Default Bacula Storage Daemon Configuration file
>>>>>>#
>>>
>>># For Bacula release 3.0.1 (30 April 2009) -- debian 5.0.1
>>>
>>>#
>>
>>># You may need to change the name of your tape drive
>>>
>>># on te "Archive Device" directive in the Device
>>>
>>># resource. If you change the Name and/or the
>>>
>>># "Media Type" inthe Device resource, please ensure
>>>
>>># that dird.conf has coresponding changes.
>>>
>>>#
>>>
>>>
>>>Storage { # definition of myself
>>>
>>> Name = backup02-sd
>>>
>>> SDPort = 103 # Director's port
>>>
>>> WorkingDirectory = "/etc/bacul/working"
>>>
>>> Pid Directory = "/var/run/bacula"
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>
>>># List Directors who are permitted to contact Storage daemon
>>>
>>>#
>>>
>>>Director {
>>>
>>> Name = ackup02-dir
>>>
>>> Password = password
>>>
>>>}
>>>
>>>
>>>
>>>## Restricted Dirctor, used by tray-monitor to get the
>>>
>>># status of the storage daemon
>>>
>>>##
>>>
>>>Director {
>>
>>> Name = backup02-mon
>>>
>>> Password = password
>>>
>>> Monitor = yes
>>>
>>>}
>>>
>>>
>>># Devices supported by this Storage daemon
>>>
>>># To connect, the Director's bacula-dir.conf must have the
>>>
>>># same Name and MediaType.
>>>
>>>#
>>>
>>>
>>>Autochanger {
>>>
>>> Name = Autochanger
>>>
>>> Device = Drive0, Drive1, Drive2, Drive3, Drive4, Drive5, Drive6,
>>>Drive7, Drive8, Drive9
>>>
>>> Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
>>>
>>> Changer Device = /dev/sg12
>>>
>>>}
>>
>>>
>>>
>>>
>>>Device {
>>>
>>> Name = Drive0
>>>
>>> Drive Index = 0
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-IPiscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tapedri
>>>v
>>>e
>>>-01-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>>
>>>
>>>
>>>Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name Drive1
>>>
>>> Drive Index = 1
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-IPiscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tapedri
>>>v
>>>e
>>>-02-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive2
>>>
>>> Drive Index = 2
>>>
>>> Media Type = LTO
>>>
>>> ArchiveDevice =
>>>/dev/tape/by-path/ip-IPiscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tapedri
>>>v
>>>e
>>>-03-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive3
>>>
>>> Drive Index = 3
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-IPiscsi-iqn.1997-05.com.amazonsgw-20b85d49-tapedri
>>>v
>>>e
>>>-04-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive4
>>>
>>> Drive Index = 4
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-IPiscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tapedri
>>>v
>>>e
>>>-05-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive5
>>>
>>> Drive Index = 5
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-IPiscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tapedri
>>>v
>>>e
>>>-06-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive6
>>>
>>> Drive Index = 6
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-IPiscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tapedri
>>>v
>>>e
>>>-07-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive7
>>>
>>> Drive Index = 7
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-IPiscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tapedri
>>>v
>>>e
>>>-08-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive8
>>>
>>> Drive Index = 8
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-IPiscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tapedri
>>>v
>>>e
>>>-09-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive9
>>>
>>> Drive Index = 9
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-IPiscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tapedri
>>>v
>>>e
>>>-10-lun-0-nst
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>
>>># Send all messages except skipped files back to Director
>>>
>>>Messages {
>>>
>>> Name = Standard
>>>
>>> director = backup02-dir = all, !skipped, !restored
>>>
>>>}
>>>
>>>
>>>
>>>####### END SD.CONF #####
>>>
>>>
>>>###### BEGIN DIR.CONF ####
>>>
>>>
>>># Default Bacula Director Configuration file
>>>
>>>#
>>>
>>># The only thing that MUST be changed is to add one or more
>>>
>>># file or directory names in the Include directive of the
>>>
>>># FileSet resource.
>>>
>>>#
>>>
>>># For Bacula release 3.0.1 (30 April 2009) -- debian 5.0.1
>>>
>>>#
>>>
>>># You might also want to change the default email address
>>>
>>># from root to your address. See the "mail" and "operator"
>>>
>>># directives in the Messages resource.
>>>
>>>#
>>>
>>>
>>>###
>>>
>>>### Source other config files
>>>
>>>###
>>>
>>>
>>>@/etc/bacula/clients.conf
>>>
>>>@/etc/bacula/jobs.conf
>>>
>>>
>>>###
>>>
>>>### Basic director configuration
>>>
>>>###
>>>
>>>
>>>Director { # define myself
>>>
>>> Name = backup-dir
>>>
>>> DIRport = 9101 # where we listen for UA connections
>>>
>>> QueryFile = "/etc/bacula/query.sql"
>>>
>>> WorkingDirectory = "/etc/bacula/working"
>>>
>>> PidDirectory = "/var/run/bacula"
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>># Password = password
>>>
>>> Password = password
>>>
>>> Messages = Daemon
>>>
>>> DIRAddress = localhost
>>>
>>>}
>>>
>>>
>>>
>>>###
>>>
>>>### Storage
>>>
>>>###
>>>
>>>
>>>
>>># Storage device for tape
>>>
>>>Storage {
>>>
>>> Name = Autochanger
>>>
>>> Address = backup. # N.B. Use a fully qualified name
>>>here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = password
>>>
>>> Device = Autochanger
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>
>>>#Storage {
>>>
>>>###
>>>
>>>###
>>>
>>>### Storage pools
>>>
>>>###
>>>
>>># Default storage pool
>>>
>>>Pool {
>>>
>>> Name = Default
>>>
>>> Pool Type = Backup
>>>
>>> Storage = Autochanger
>>>
>>> Recycle = no # Bacula can automatically recycle
>>>Volumes
>>>
>>> AutoPrune = yes # Prune expired volumes
>>>
>>> Volume Retention = 365 days # one year
>>>
>>> Maximum Volume Bytes = 2500G
>>>
>>>}
>>>
>>>
>>>###
>>>
>>># social service storage pool
>>>
>>>Pool {
>>>
>>> Name = svc
>>>
>>> Pool Type = Backup
>>>
>>> Storage = Autochanger
>>>
>>> Recycle = no # Bacula can automatically recycle
>>>Volumes
>>>
>>> AutoPrune = yes # Prune expired volumes
>>>
>>> Volume Retention = 365 days # one year
>>>
>>> Maximum Volume Bytes = 2500G
>>>
>>>}
>>>
>>>
>>># database service storage pool
>>>
>>>Pool {
>>>
>>> Name = database
>>>
>>> Pool Type = Backup
>>>
>>> Storage = Autochanger
>>>
>>> Recycle = no # Bacula can automatically recycle
>>>Volumes
>>>
>>> AutoPrune = yes # Prune expired volumes
>>>
>>> Volume Retention = 365 days # one year
>>>
>>> Maximum Volume Bytes = 2500G
>>>
>>>}
>>>
>>>
>>>
>>>
>>>###
>>>
>>>### Backup catalog
>>>
>>>###
>>>
>>>
>>># Generic catalog service
>>>
>>>Catalog {
>>>
>>> Name = MyCatalog
>>>
>>># Uncomment the following line if you want the dbi driver
>>>
>>># dbdriver = "dbi:mysql"; dbaddress = 127.0.0.1; dbport =
>>>
>>> dbname = "bacula"; dbuser = ""; dbpassword = "password"
>>>
>>>}
>>>
>>>
>>>
>>>###
>>>
>>>### Logging
>>>
>>>###
>>>
>>>
>>># Reasonable message delivery -- send most everything to email address
>>>
>>># and to the console
>>>
>>>Messages {
>>>
>>> Name = Standard
>>>
>>>#
>>>
>>># NOTE! If you send to two email or more email addresses, you will need
>>>
>>># to replace the %r in the from field (-f part) with a single valid
>>>
>>># email address in both the mailcommand and the operatorcommand.
>>>
>>># What this does is, it sets the email address that emails would
>>>display
>>>
>>># in the FROM field, which is by default the same email as they're
>>>being
>>>
>>># sent to. However, if you send email to more than one address, then
>>>
>>># you'll have to set the FROM address manually, to a single address.
>>>
>>># for example, a 'no-reply AT mydomain DOT com<mailto:no-reply AT mydomain
>>>DOT com>',
>>>is better since that tends to
>>>
>>># tell (most) people that its coming from an automated source.
>>>
>>>
>>>#
>>>
>>> mailcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\"
>>>-s
>>>\"Bacula: %t %e of %c %l\" %r"
>>>
>>> operatorcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\)
>>>\<%r\>\" -s \"Bacula: Intervention needed for %j\" %r"
>>>
>>> mail on error = whodat AT wedat DOT com<mailto:whodat AT wedat DOT com> =
>>> all,
>>>!skipped
>>>
>>> operator = whodat AT wedat DOT com<mailto:whodat AT wedat DOT com>= mount
>>>
>>> console = all, !skipped, !saved
>>>
>>>#
>>>
>>># WARNING! the following will create a file that you must cycle from
>>>
>>># time to time as it will grow indefinitely. However, it will
>>>
>>># also keep all your messages if they scroll off the console.
>>>
>>>#
>>>
>>> append = "/etc/bacula/working/log" = all, !skipped
>>>
>>>
>>> catalog = all, !skipped, !saved
>>>
>>>}
>>>
>>>
>>>
>>>#
>>>
>>># Message delivery for daemon messages (no job).
>>>
>>>Messages {
>>>
>>> Name = Daemon
>>>
>>> mailcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\"
>>>-s
>>>\"Bacula daemon message\" %r"
>>>
>>> mail = @localhost = all, !skipped
>>>
>>> console = all, !skipped, !saved
>>>
>>> append = "/etc/bacula/working/log" = all, !skipped
>>>
>>>}
>>>
>>>
>>>
>>>###
>>>
>>>### Console
>>>
>>>###
>>>
>>>
>>># Restricted console used by tray-monitor to get the status of the
>>>director
>>>
>>>Console {
>>>
>>> Name = backup-mon
>>>
>>> Password = password
>>>
>>> CommandACL = status, .status
>>>
>>>}
>>>
>>>
>>>###### END DIR.CONF ####
>>>
>>>#### SHOW POOLS OUTPUT ####
>>>
>>>
>>>Pool: name=Default PoolType=Backup
>>>
>>> use_cat=1 use_once=0 cat_files=1
>>>
>>> max_vols=0 auto_prune=1 VolRetention=1 year
>>>
>>> VolUse=0 secs recycle=0 LabelFormat=*None*
>>>
>>> CleaningPrefix=*None* LabelType=0
>>>
>>> RecyleOldest=0 PurgeOldest=0 ActionOnPurge=0
>>>
>>> MaxVolJobs=0 MaxVolFiles=0 MaxVolBytes=2684354560000
>>>
>>> MigTime=0 secs MigHiBytes=0 MigLoBytes=0
>>>
>>> JobRetention=0 secs FileRetention=0 secs
>>>
>>> --> Storage: name=Autochanger
>>>address=backup02.wes.popcap.com<http://backup02.wes.popcap.com>
>>>SDport=9103 MaxJobs=20
>>>
>>> DeviceName=Autochanger MediaType=LTO StorageId=13
>>>
>>>Pool: name=svc PoolType=Backup
>>>
>>> use_cat=1 use_once=0 cat_files=1
>>>
>>> max_vols=0 auto_prune=1 VolRetention=1 year
>>>
>>> VolUse=0 secs recycle=0 LabelFormat=*None*
>>>
>>> CleaningPrefix=*None* LabelType=0
>>>
>>> RecyleOldest=0 PurgeOldest=0 ActionOnPurge=0
>>>
>>> MaxVolJobs=0 MaxVolFiles=0 MaxVolBytes=2684354560000
>>>
>>> MigTime=0 secs MigHiBytes=0 MigLoBytes=0
>>>
>>> JobRetention=0 secs FileRetention=0 secs
>>>
>>> --> Storage: name=Autochanger
>>>address=backup02.wes.popcap.com<http://backup02.wes.popcap.com>
>>>SDport=9103 MaxJobs=20
>>>
>>> DeviceName=Autochanger MediaType=LTO StorageId=13
>>>
>>>Pool: name=database PoolType=Backup
>>>
>>> use_cat=1 use_once=0 cat_files=1
>>>
>>> max_vols=0 auto_prune=1 VolRetention=1 year
>>>
>>> VolUse=0 secs recycle=0 LabelFormat=*None*
>>>
>>> CleaningPrefix=*None* LabelType=0
>>>
>>> RecyleOldest=0 PurgeOldest=0 ActionOnPurge=0
>>>
>>> MaxVolJobs=0 MaxVolFiles=0 MaxVolBytes=2684354560000
>>>
>>> MigTime=0 secs MigHiBytes=0 MigLoBytes=0
>>>
>>> JobRetention=0 secs FileRetention=0 secs
>>>
>>> --> Storage: name=Autochanger
>>>address=backup02.wes.popcap.com<http://backup02.wes.popcap.com>
>>>SDport=9103 MaxJobs=20
>>>
>>> DeviceName=Autochanger MediaType=LTO StorageId=13
>>>
>>>
>>>#### OUTPUT FROM QUERY option 15 #####
>>>
>>> 15: List Volumes Bacula thinks are in changer
>>>
>>> 16: List Volumes likely to need replacement from age or errors
>>>
>>>Choose a query (1-16): 15
>>>
>>>+---------+------------+-------------+-------------+------+----------+--
>>>-
>>>-
>>>-------+-----------+
>>>
>>>| MediaId | VolumeName | GB | Storage | Slot | Pool |
>>>MediaType | VolStatus |
>>>
>>>+---------+------------+-------------+-------------+------+----------+--
>>>-
>>>-
>>>-------+-----------+
>>>
>>>| 19 | AAAACE5F6B | 255.5893 | Autochanger | 1 | svc |
>>>LTO | Append |
>>>
>>>| 26 | AAAACC5F69 | 1657.5554 | Autochanger | 2 | svc |
>>>LTO | Append |
>>>
>>>| 20 | AAAACF5F6A | 1509.3844 | Autochanger | 3 | database |
>>>LTO | Append |
>>>
>>>| 25 | AAAAD45F71 | 7.1532 | Autochanger | 4 | database |
>>>LTO | Append |
>>>
>>>| 22 | AAAAD55F70 | 900.0329 | Autochanger | 5 | database |
>>>LTO | Append |
>>>
>>>| 21 | AAAAC95F6C | 129.9827 | Autochanger | 6 | database |
>>>LTO | Append |
>>>
>>>| 24 | AAAACB5F6E | 32.4151 | Autochanger | 7 | Default |
>>>LTO | Append |
>>>
>>>| 28 | AAAB3B609E | 329.3842 | Autochanger | 8 | Default |
>>>LTO | Append |
>>>
>>>| 23 | AAAACA5F6F | 1602.8880 | Autochanger | 9 | Default |
>>>LTO | Append |
>>>
>>>| 27 | AAAACD5F68 | 15.8603 | Autochanger | 10 | Default |
>>>LTO | Append |
>>>
>>>| 18 | AAAAC85F6D | 683.2106 | Autochanger | 11 | Default |
>>>LTO | Full |
>>>
>>>+---------+------------+-------------+-------------+------+----------+--
>>>-
>>>-
>>>-------+—————+
>>>
>>>
>>>
>>>
>>>###### OUT PUT FROM STATUS STORAGE #####
>>>
>>>
>>>*status storage
>>>
>>>Automatically selected Storage: Autochanger
>>>
>>>Connecting to Storage daemon Autochanger at
>>>backup02.wes.popcap.com:9103<http://backup02.wes.popcap.com:9103>
>>>
>>>
>>>backup02-sd Version: 5.2.6 (21 February 2012) x86_64-pc-linux-gnu
>>>ubuntu
>>>14.04
>>>
>>>Daemon started 20-Nov-14 20:53. Jobs: run=4, running=0.
>>>
>>> Heap: heap=270,336 smbytes=361,672 max_bytes=665,104 bufs=248
>>>max_bufs=325
>>>
>>> Sizes: boffset_t=8 size_t=8 int32_t=4 int64_t=8 mode=0,0
>>>
>>>
>>>Running Jobs:
>>>
>>>No Jobs running.
>>>
>>>====
>>>
>>>
>>>Jobs waiting to reserve a drive:
>>>
>>>====
>>>
>>>
>>>Terminated Jobs:
>>>
>>> JobId Level Files Bytes Status Finished Name
>>>
>>>===================================================================
>>>
>>> 950 Diff 2 14.14 G OK 20-Nov-14 10:39
>>>shopdb3-02:database
>>>
>>> 948 Diff 2 29.38 G OK 20-Nov-14 11:12
>>>pushdb1-02:database
>>>
>>> 946 Diff 1 31.01 G OK 20-Nov-14 11:28
>>>ecommdb1-02:database
>>>
>>> 959 Diff 202 27.32 G OK 20-Nov-14 12:41 svc4
>>>
>>> 960 Full 3,205 137.3 G OK 20-Nov-14 19:01 svc5
>>>
>>> 966 Diff 1 1.321 G Cancel 20-Nov-14 20:46
>>>labsdb3-02:database
>>>
>>> 970 Diff 1 3.567 G OK 20-Nov-14 21:20
>>>labsdb3-02:database
>>>
>>> 971 Diff 3 4.529 G OK 20-Nov-14 21:25
>>>labsdb4-02:database
>>>
>>> 972 Diff 1 5.152 G OK 20-Nov-14 21:26
>>>labsdb5-01:database
>>>
>>> 973 Diff 1 5.508 G OK 20-Nov-14 21:26
>>>labsdb6-02:database
>>>
>>>====
>>>
>>>
>>>Device status:
>>>
>>>Autochanger "Autochanger" with devices:
>>>
>>> "Drive0"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-01-lun-0-nst)
>>>
>>> "Drive1"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-02-lun-0-nst)
>>>
>>> "Drive2"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-03-lun-0-nst)
>>>
>>> "Drive3"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-04-lun-0-nst)
>>>
>>> "Drive4"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-05-lun-0-nst)
>>>
>>> "Drive5"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-06-lun-0-nst)
>>>
>>> "Drive6"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-07-lun-0-nst)
>>>
>>> "Drive7"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-08-lun-0-nst)
>>>
>>> "Drive8"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-09-lun-0-nst)
>>>
>>> "Drive9"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-10-lun-0-nst)
>>>
>>>Device "Drive0"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-01-lun-0-nst) is mounted with:
>>>
>>> Volume: AAAACF5F6A
>>>
>>> Pool: database
>>>
>>> Media type: LTO
>>>
>>> Slot 3 is loaded in drive 0.
>>>
>>> Total Bytes=1,621,836,840,960 Blocks=290,988 Bytes/block=5,573,552
>>>
>>> Positioned at File=1,662 Block=0
>>>
>>>Device "Drive1"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-02-lun-0-nst) is not open.
>>>
>>> Drive 1 is not loaded.
>>>
>>>Device "Drive2"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-03-lun-0-nst) is not open.
>>>
>>> Drive 2 is not loaded.
>>>
>>>Device "Drive3"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-04-lun-0-nst) is not open.
>>>
>>> Drive 3 is not loaded.
>>>
>>>Device "Drive4"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-05-lun-0-nst) is not open.
>>>
>>> Drive 4 is not loaded.
>>>
>>>Device "Drive5"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-06-lun-0-nst) is not open.
>>>
>>> Drive 5 is not loaded.
>>>
>>>Device "Drive6"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-07-lun-0-nst) is not open.
>>>
>>> Drive 6 is not loaded.
>>>
>>>Device "Drive7"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-08-lun-0-nst) is not open.
>>>
>>> Drive 7 is not loaded.
>>>
>>>Device "Drive8"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-09-lun-0-nst) is not open.
>>>
>>> Drive 8 is not loaded.
>>>
>>>Device "Drive9"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-10-lun-0-nst) is not open.
>>>
>>> Drive 9 is not loaded.
>>>
>>>====
>>>
>>>
>>>Used Volume status:
>>>
>>>AAAACF5F6A on device "Drive0"
>>>(/dev/tape/by-path/ip-10.5.66.22:3260-iscsi-iqn.1997-05.com.amazon:sgw-2
>>>0
>>>b
>>>85d49-tapedrive-01-lun-0-nst)
>>>
>>> Reader=0 writers=0 devres=0 volinuse=0
>>>
>>>
>>>
>>>###############
>>>
>>>
>>>##### OUT PUT FROM LIST JOBS ###
>>>
>>>
>>>| 970 | labsdb3-02:database | 2014-11-20 20:58:07 | B | D |
>>>
>>>
>>> 1 | 3,567,140,654 | T |
>>>
>>>| 971 | labsdb4-02:database | 2014-11-20 20:58:09 | B | D |
>>>
>>>
>>> 3 | 4,529,882,002 | T |
>>>
>>>| 972 | labsdb5-01:database | 2014-11-20 20:58:16 | B | D |
>>>
>>>
>>> 0 | 0 | R |
>>>
>>>| 973 | labsdb6-02:database | 2014-11-20 20:58:18 | B | D |
>>>
>>>
>>> 0 | 0 | R
>>>
>>>
>>>
>>>
>>>##### AND FINALLY, querying jobid for volume shows all 4 jobs writing
>>>to
>>>the same volume at the same time, interleaving as opposed to using
>>>available volume in pool ####
>>>
>>>
>>>Available queries:
>>>
>>> 1: List up to 20 places where a File is saved regardless of the
>>>directory
>>>
>>> 2: List where the most recent copies of a file are saved
>>>
>>> 3: List last 20 Full Backups for a Client
>>>
>>> 4: List all backups for a Client after a specified time
>>>
>>> 5: List all backups for a Client
>>>
>>> 6: List Volume Attributes for a selected Volume
>>>
>>> 7: List Volumes used by selected JobId
>>>
>>> 8: List Volumes to Restore All Files
>>>
>>> 9: List Pool Attributes for a selected Pool
>>>
>>> 10: List total files/bytes by Job
>>>
>>> 11: List total files/bytes by Volume
>>>
>>> 12: List Files for a selected JobId
>>>
>>> 13: List Jobs stored on a selected MediaId
>>>
>>> 14: List Jobs stored for a given Volume name
>>>
>>> 15: List Volumes Bacula thinks are in changer
>>>
>>> 16: List Volumes likely to need replacement from age or errors
>>>
>>>Choose a query (1-16): 7
>>>
>>>Enter JobId: 970
>>>
>>>+-------+------------+
>>>
>>>| JobId | VolumeName |
>>>
>>>+-------+------------+
>>>
>>>| 970 | AAAACF5F6A |
>>>
>>>+-------+------------+
>>>
>>>*query
>>>
>>>Available queries:
>>>
>>> 1: List up to 20 places where a File is saved regardless of the
>>>directory
>>>
>>> 2: List where the most recent copies of a file are saved
>>>
>>> 3: List last 20 Full Backups for a Client
>>>
>>> 4: List all backups for a Client after a specified time
>>>
>>> 5: List all backups for a Client
>>>
>>> 6: List Volume Attributes for a selected Volume
>>>
>>> 7: List Volumes used by selected JobId
>>>
>>> 8: List Volumes to Restore All Files
>>>
>>> 9: List Pool Attributes for a selected Pool
>>>
>>> 10: List total files/bytes by Job
>>>
>>> 11: List total files/bytes by Volume
>>>
>>> 12: List Files for a selected JobId
>>>
>>> 13: List Jobs stored on a selected MediaId
>>>
>>> 14: List Jobs stored for a given Volume name
>>>
>>> 15: List Volumes Bacula thinks are in changer
>>>
>>> 16: List Volumes likely to need replacement from age or errors
>>>
>>>Choose a query (1-16): 7
>>>
>>>Enter JobId: 971
>>>
>>>+-------+------------+
>>>
>>>| JobId | VolumeName |
>>>
>>>+-------+------------+
>>>
>>>| 971 | AAAACF5F6A |
>>>
>>>+-------+------------+
>>>
>>>*query
>>>
>>>Available queries:
>>>
>>> 1: List up to 20 places where a File is saved regardless of the
>>>directory
>>>
>>> 2: List where the most recent copies of a file are saved
>>>
>>> 3: List last 20 Full Backups for a Client
>>>
>>> 4: List all backups for a Client after a specified time
>>>
>>> 5: List all backups for a Client
>>>
>>> 6: List Volume Attributes for a selected Volume
>>>
>>> 7: List Volumes used by selected JobId
>>>
>>> 8: List Volumes to Restore All Files
>>>
>>> 9: List Pool Attributes for a selected Pool
>>>
>>> 10: List total files/bytes by Job
>>>
>>> 11: List total files/bytes by Volume
>>>
>>> 12: List Files for a selected JobId
>>>
>>> 13: List Jobs stored on a selected MediaId
>>>
>>> 14: List Jobs stored for a given Volume name
>>>
>>> 15: List Volumes Bacula thinks are in changer
>>>
>>> 16: List Volumes likely to need replacement from age or errors
>>>
>>>Choose a query (1-16): 7
>>>
>>>Enter JobId: 972
>>>
>>>+-------+------------+
>>>
>>>| JobId | VolumeName |
>>>
>>>+-------+------------+
>>>
>>>| 972 | AAAACF5F6A |
>>>
>>>+-------+------------+
>>>
>>>*query
>>>
>>>Available queries:
>>>
>>> 1: List up to 20 places where a File is saved regardless of the
>>>directory
>>>
>>> 2: List where the most recent copies of a file are saved
>>>
>>> 3: List last 20 Full Backups for a Client
>>>
>>> 4: List all backups for a Client after a specified time
>>>
>>> 5: List all backups for a Client
>>>
>>> 6: List Volume Attributes for a selected Volume
>>>
>>> 7: List Volumes used by selected JobId
>>>
>>> 8: List Volumes to Restore All Files
>>>
>>> 9: List Pool Attributes for a selected Pool
>>>
>>> 10: List total files/bytes by Job
>>>
>>> 11: List total files/bytes by Volume
>>>
>>> 12: List Files for a selected JobId
>>>
>>> 13: List Jobs stored on a selected MediaId
>>>
>>> 14: List Jobs stored for a given Volume name
>>>
>>> 15: List Volumes Bacula thinks are in changer
>>>
>>> 16: List Volumes likely to need replacement from age or errors
>>>
>>>Choose a query (1-16): 7
>>>
>>>Enter JobId: 973
>>>
>>>+-------+------------+
>>>
>>>| JobId | VolumeName |
>>>
>>>+-------+------------+
>>>
>>>| 973 | AAAACF5F6A |
>>>
>>>+-------+------------
>>>
>>>From: "Ana Emília M. Arruda"
>>><emiliaarruda AT gmail DOT com<mailto:emiliaarruda AT gmail DOT com>>
>>>Date: Wednesday, November 19, 2014 at 5:56 PM
>>>To: "Kelley, Jared" <jkelley AT popcap DOT com<mailto:jkelley AT popcap DOT
>>>com>>
>>>Cc: bacula-users
>>><bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>e
>>>.
>>>net>>
>>>Subject: Re: [Bacula-users] bacula can't make use of multi drives
>>>
>>>Hi Jared,
>>>
>>>In your bacula-sd.conf, you have defined an autochanger device:
>>>
>>>
>>>Name = Autochanger
>>>
>>> Device = Drive-1, Drive-2, Drive-3, Drive-4, Drive-5, Drive-6,
>>>Drive-7,
>>>Drive-8, Drive-9, Drive-10
>>>
>>>...
>>>
>>>}
>>>
>>>
>>>But, in your bacula-sd.conf, you don't use it. Instead, you have a
>>>storage definition for each of your tape devices, like the bellow one
>>>for
>>>the Drive-1:
>>>
>>>
>>>Storage {
>>>
>>> Name = Tape1
>>>
>>> Address = backup # N.B. Use a fully qualified name here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = “PASSWORD" # password for SD
>>>
>>> Device = Drive-1
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>> This way, you are not using an autochanger nor a group of devices,
>>>but
>>>stand alone tape drives.
>>>
>>>If you want to use the autochanger, in your bacula-dir.conf, you should
>>>have just one storage definition for your autochanger, like (note that
>>>the Device name in your bacula-dir.conf is the same as the Autochanger
>>>Name in your bacula-sd.conf):
>>>
>>>
>>>Storage {
>>>
>>> Name =
>>>
>>>Autochanger-sd
>>>
>>> Address = backup # N.B. Use a fully qualified name here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = “PASSWORD" # password for SD
>>>
>>> Device =
>>>
>>> Autochanger
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>> Also, could you please confirm if the bellow definitions in your
>>>pools
>>>are really working?
>>>
>>>
>>>Pool {
>>>
>>> Name = Default
>>>
>>> Pool Type = Backup
>>>
>>> Storage = Tape7, Tape8, Tape9, Tape10
>>>
>>>...
>>>
>>>}
>>>
>>>
>>>Is it really possible to have more than one storage in the storage
>>>directive definition above? Because I really think that the storage
>>>directive accepts just one storage entry definition. And if you have
>>>defined an autochanger in your bacula-dir.conf, so this should be
>>>something like:
>>>
>>>
>>>Pool {
>>>
>>> Name = Default
>>>
>>> Pool Type = Backup
>>>
>>> Storage = Autochanger-sd
>>>
>>>...
>>>
>>>}
>>>
>>>
>>>Best regards,
>>>
>>>Ana
>>>
>>>
>>>On Wed, Nov 19, 2014 at 5:01 PM, Kelley, Jared
>>><jkelley AT popcap DOT com<mailto:jkelley AT popcap DOT com>> wrote:
>>>Sure, here is my bacula-sd.conf and bacula-dir.conf. passwords and
>>>addresses edited for security reasons.
>>>
>>>
>>>
>>>
>>># Default Bacula Storage Daemon Configuration file
>>>
>>>#
>>>
>>># For Bacula release 3.0.1 (30 April 2009) -- debian 5.0.1
>>>
>>>#
>>>
>>># You may need to change the name of your tape drive
>>>
>>># on the "Archive Device" directive in the Device
>>>
>>># resource. If you change the Name and/or the
>>>
>>># "Media Type" in the Device resource, please ensure
>>>
>>># that dird.conf has corresponding changes.
>>>
>>>#
>>>
>>>
>>>Storage { # definition of myself
>>>
>>> Name = backup02-sd
>>>
>>> SDPort = 9103 # Director's port
>>>
>>> WorkingDirectory = "/etc/bacula/working"
>>>
>>> Pid Directory = "/var/run/bacula"
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>
>>># List Directors who are permitted to contact Storage daemon
>>>
>>>#
>>>
>>>Director {
>>>
>>> Name = backup02-dir
>>>
>>> Password = “PASSWORD"
>>>
>>>}
>>>
>>>
>>>
>>>## Restricted Director, used by tray-monitor to get the
>>>
>>># status of the storage daemon
>>>
>>>##
>>>
>>>Director {
>>>
>>> Name = backup02-mon
>>>
>>> Password = “PASSWORD"
>>>
>>> Monitor = yes
>>>
>>>}
>>>
>>>
>>>
>>>Autochanger {
>>>
>>> Name = Autochanger
>>>
>>> Device = Drive-1, Drive-2, Drive-3, Drive-4, Drive-5, Drive-6,
>>>Drive-7,
>>>Drive-8, Drive-9, Drive-10
>>>
>>> Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
>>>
>>> Changer Device = /dev/sg12
>>>
>>>}
>>>
>>>
>>>
>>>Device {
>>>
>>> Name = Drive-1
>>>
>>> Drive Index = 0
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-:3260-iscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tap
>>>e
>>>d
>>>rive-01-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>> Maximum Changer Wait = 10 minutes
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive-2
>>>
>>> Drive Index = 1
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-:3260-iscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tap
>>>e
>>>d
>>>rive-02-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>> Maximum Changer Wait = 10 minutes
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive-3
>>>
>>> Drive Index = 2
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-:3260-iscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tap
>>>e
>>>d
>>>rive-03-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>> Maximum Changer Wait = 10 minutes
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive-4
>>>
>>> Drive Index = 3
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-:3260-iscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tap
>>>e
>>>d
>>>rive-04-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>> Maximum Changer Wait = 10 minutes
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive-5
>>>
>>> Drive Index = 4
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-:3260-iscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tap
>>>e
>>>d
>>>rive-05-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>> Maximum Changer Wait = 10 minutes
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive-6
>>>
>>> Drive Index = 5
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-:3260-iscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tap
>>>e
>>>d
>>>rive-06-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>> Maximum Changer Wait = 10 minutes
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive-7
>>>
>>> Drive Index = 6
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-:3260-iscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tap
>>>e
>>>d
>>>rive-07-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>> Maximum Changer Wait = 10 minutes
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive-8
>>>
>>> Drive Index = 7
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-:3260-iscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tap
>>>e
>>>d
>>>rive-08-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>> Maximum Changer Wait = 10 minutes
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive-9
>>>
>>> Drive Index = 8
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-:3260-iscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tap
>>>e
>>>d
>>>rive-09-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>> Maximum Changer Wait = 10 minutes
>>>
>>>}
>>>
>>>
>>>Device {
>>>
>>> Name = Drive-10
>>>
>>> Drive Index = 9
>>>
>>> Media Type = LTO
>>>
>>> Archive Device =
>>>/dev/tape/by-path/ip-:3260-iscsi-iqn.1997-05.com.amazon:sgw-20b85d49-tap
>>>e
>>>d
>>>rive-10-lun-0-nst
>>>
>>> AutomaticMount = yes; # when device opened, read it
>>>
>>> AlwaysOpen = yes;
>>>
>>> RemovableMedia = yes;
>>>
>>> RandomAccess = no;
>>>
>>> LabelMedia = no;
>>>
>>> AutoChanger = yes
>>>
>>> # Enable the Alert command only if you have the mtx package loaded
>>>
>>> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>>>
>>> SpoolDirectory = /etc/bacula/spool
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>> Maximum Changer Wait = 10 minutes
>>>
>>>}
>>>
>>>
>>>
>>># Send all messages except skipped files back to Director
>>>
>>>Messages {
>>>
>>> Name = Standard
>>>
>>> director = backup02-dir = all, !skipped, !restored
>>>
>>>}
>>>
>>>########### END BACULA-SD.CONF ############
>>>
>>>########### BEGIN BACULA-DIR.CONF ##########
>>>
>>>
>>>
>>>Default Bacula Director Configuration file
>>>
>>>#
>>>
>>># The only thing that MUST be changed is to add one or more
>>>
>>># file or directory names in the Include directive of the
>>>
>>># FileSet resource.
>>>
>>>#
>>>
>>># For Bacula release 3.0.1 (30 April 2009) -- debian 5.0.1
>>>
>>>#
>>>
>>># You might also want to change the default email address
>>>
>>># from root to your address. See the "mail" and "operator"
>>>
>>># directives in the Messages resource.
>>>
>>>#
>>>
>>>
>>>###
>>>
>>>### Source other config files
>>>
>>>###
>>>
>>>
>>>@/etc/bacula/clients.conf
>>>
>>>@/etc/bacula/jobs.conf
>>>
>>>
>>>###
>>>
>>>### Basic director configuration
>>>
>>>###
>>>
>>>
>>>Director { # define myself
>>>
>>> Name = backup02-dir
>>>
>>> DIRport = 9101 # where we listen for UA connections
>>>
>>> QueryFile = "/etc/bacula/query.sql"
>>>
>>> WorkingDirectory = "/etc/bacula/working"
>>>
>>> PidDirectory = "/var/run/bacula"
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>> Password = “PASSWORD" # Console password
>>>
>>> Messages = Daemon
>>>
>>> DIRAddress = localhost
>>>
>>>}
>>>
>>>
>>>
>>>###
>>>
>>>### Storage
>>>
>>>###
>>>
>>>
>>>
>>># Storage device for tape
>>>
>>>Storage {
>>>
>>> Name = Tape1
>>>
>>> Address = backup # N.B. Use a fully qualified name here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = “PASSWORD" # password for SD
>>>
>>> Device = Drive-1
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Storage {
>>>
>>> Name = Tape2
>>>
>>> Address = backup # N.B. Use a fully qualified name
>>>here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = “PASSWORD" # password for SD
>>>
>>> Device = Drive-2 # must be same Device in sd
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Storage {
>>>
>>> Name = Tape3
>>>
>>> Address = backup # N.B. Use a fully qualified name
>>>here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = “PASSWORD" # password for SD
>>>
>>> Device = Drive-3
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Storage {
>>>
>>> Name = Tape4
>>>
>>> Address = backup # N.B. Use a fully qualified name
>>>here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = “PASSWORD" # password for SD
>>>
>>> Device = Drive-4
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Storage {
>>>
>>> Name = Tape5
>>>
>>> Address = backup # N.B. Use a fully qualified name
>>>here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = “PASSWORD" # password for SD
>>>
>>> Device = Drive-5
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Storage {
>>>
>>> Name = Tape6
>>>
>>> Address = backup # N.B. Use a fully qualified name
>>>here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = “PASSWORD" # password for SD
>>>
>>> Device = Drive-6
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Storage {
>>>
>>> Name = Tape7
>>>
>>> Address = backup # N.B. Use a fully qualified name
>>>here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = “PASSWORD" # password for SD
>>>
>>> Device = Drive-7
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Storage {
>>>
>>> Name = Tape8
>>>
>>> Address = backup # N.B. Use a fully qualified name
>>>here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = “PASSWORD" # password for SD
>>>
>>> Device = Drive-8
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Storage {
>>>
>>> Name = Tape9
>>>
>>> Address = backup # N.B. Use a fully qualified name
>>>here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = “PASSWORD" # password for SD
>>>
>>> Device = Drive-9
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>Storage {
>>>
>>> Name = Tape10
>>>
>>> Address = backup # N.B. Use a fully qualified name here,
>>>not localhost
>>>
>>> SDPort = 9103
>>>
>>> Password = “PASSWORD" # password for SD
>>>
>>> Device = Drive-10
>>>
>>> Media Type = LTO
>>>
>>> Autochanger = yes # enable for autochanger device
>>>
>>> Maximum Concurrent Jobs = 20
>>>
>>>}
>>>
>>>
>>>#Storage {
>>>
>>>###
>>>
>>>###
>>>
>>>### Storage pools
>>>
>>>###
>>>
>>># Default storage pool
>>>
>>>Pool {
>>>
>>> Name = Default
>>>
>>> Pool Type = Backup
>>>
>>> Storage = Tape7, Tape8, Tape9, Tape10
>>>
>>> Recycle = no # Bacula can automatically recycle
>>>Volumes
>>>
>>> AutoPrune = yes # Prune expired volumes
>>>
>>> Volume Retention = 365 days # one year
>>>
>>> Maximum Volume Bytes = 2500G
>>>
>>>}
>>>
>>>
>>>###
>>>
>>># social service storage pool
>>>
>>>Pool {
>>>
>>> Name = svc
>>>
>>> Pool Type = Backup
>>>
>>> Storage = Tape1, Tape2
>>>
>>> Recycle = no # Bacula can automatically recycle
>>>Volumes
>>>
>>> AutoPrune = yes # Prune expired volumes
>>>
>>> Volume Retention = 365 days # one year
>>>
>>> Maximum Volume Bytes = 2500G
>>>
>>>}
>>>
>>>
>>># database service storage pool
>>>
>>>Pool {
>>>
>>> Name = database
>>>
>>> Pool Type = Backup
>>>
>>> Storage = Tape3, Tape4, Tape5, Tape6
>>>
>>> Recycle = no # Bacula can automatically recycle
>>>Volumes
>>>
>>> AutoPrune = yes # Prune expired volumes
>>>
>>> Volume Retention = 365 days # one year
>>>
>>> Maximum Volume Bytes = 2500G
>>>
>>>}
>>>
>>>
>>>###
>>>
>>>### Backup catalog
>>>
>>>###
>>>
>>>
>>># Generic catalog service
>>>
>>>Catalog {
>>>
>>> Name = MyCatalog
>>>
>>># Uncomment the following line if you want the dbi driver
>>>
>>># dbdriver = "dbi:mysql"; dbaddress = 127.0.0.1; dbport =
>>>
>>> dbname = "bacula"; dbuser = “USER"; dbpassword = “HAHAHA"
>>>
>>>}
>>>
>>>
>>>
>>>###
>>>
>>>### Logging
>>>
>>>###
>>>
>>>
>>># Reasonable message delivery -- send most everything to email address
>>>
>>># and to the console
>>>
>>>Messages {
>>>
>>> Name = Standard
>>>
>>>#
>>>
>>># NOTE! If you send to two email or more email addresses, you will need
>>>
>>># to replace the %r in the from field (-f part) with a single valid
>>>
>>># email address in both the mailcommand and the operatorcommand.
>>>
>>># What this does is, it sets the email address that emails would
>>>display
>>>
>>># in the FROM field, which is by default the same email as they're
>>>being
>>>
>>># sent to. However, if you send email to more than one address, then
>>>
>>># you'll have to set the FROM address manually, to a single address.
>>>
>>># for example, a
>>>'no-reply AT mydomain DOT com<mailto:no-reply AT mydomain DOT com>',
>>>is better since that tends to
>>>
>>># tell (most) people that its coming from an automated source.
>>>
>>>
>>>#
>>>
>>> mailcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\"
>>>-s
>>>\"Bacula: %t %e of %c %l\" %r"
>>>
>>> operatorcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\)
>>>\<%r\>\" -s \"Bacula: Intervention needed for %j\" %r"
>>>
>>> mail on error = EMAILADDRESS = all, !skipped
>>>
>>> operator = EMAILADDRESS= mount
>>>
>>> console = all, !skipped, !saved
>>>
>>>#
>>>
>>># WARNING! the following will create a file that you must cycle from
>>>
>>># time to time as it will grow indefinitely. However, it will
>>>
>>># also keep all your messages if they scroll off the console.
>>>
>>>#
>>>
>>> append = "/etc/bacula/working/log" = all, !skipped
>>>
>>>
>>> catalog = all, !skipped, !saved
>>>
>>>}
>>>
>>>
>>>
>>>#
>>>
>>># Message delivery for daemon messages (no job).
>>>
>>>Messages {
>>>
>>> Name = Daemon
>>>
>>> mailcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\"
>>>-s
>>>\"Bacula daemon message\" %r"
>>>
>>> mail = root@localhost = all, !skipped
>>>
>>> console = all, !skipped, !saved
>>>
>>> append = "/etc/bacula/working/log" = all, !skipped
>>>
>>>}
>>>
>>>
>>>
>>>###
>>>
>>>### Console
>>>
>>>###
>>>
>>>
>>># Restricted console used by tray-monitor to get the status of the
>>>director
>>>
>>>Console {
>>>
>>> Name = backup02-mon
>>>
>>> Password = “PASSWORD"
>>>
>>> CommandACL = status, .status
>>>
>>>}
>>>
>>>From: "Ana Emília M. Arruda"
>>><emiliaarruda AT gmail DOT com<mailto:emiliaarruda AT gmail DOT com>>
>>>Date: Wednesday, November 19, 2014 at 11:27 AM
>>>To: "Kelley, Jared" <jkelley AT popcap DOT com<mailto:jkelley AT popcap DOT
>>>com>>
>>>Cc: "heitor AT bacula.com DOT br<mailto:heitor AT bacula.com DOT br>"
>>><heitor AT bacula.com DOT br<mailto:heitor AT bacula.com DOT br>>, Josh
>>>Fisher
>>><jfisher AT pvct DOT com<mailto:jfisher AT pvct DOT com>>,
>>>"bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>e
>>>.
>>>net>"
>>><bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>e
>>>.
>>>net>>
>>>
>>>Subject: Re: [Bacula-users] bacula can't make use of multi drives
>>>
>>>Hi Jared,
>>>
>>>Can you post here your storage configurations?
>>>
>>>Best regards,
>>>Ana
>>>
>>>On Wed, Nov 19, 2014 at 3:56 PM, Kelley, Jared
>>><jkelley AT popcap DOT com<mailto:jkelley AT popcap DOT com>> wrote:
>>>For the sake of sharing information I am going to reply to this thread
>>>since I am working on the same type of setup and experiencing similar
>>>issues.
>>>
>>>
>>>I removed the setting ‘prefer mounted volumes = no' and separated my
>>>jobs
>>>into 3 different pools. All my jobs are running smoothly now, no
>>>failures. The prefer mounted volumes was the issue.
>>>Now I am experiencing interleaving on a single volume/tape drive with
>>>multiple jobs scheduled at the same time, in the same pool, as opposed
>>>to
>>>bacula using different volumes and different drives for jobs scheduled
>>>at
>>>the same time for the same pool.
>>>
>>>Here is my issue:
>>>
>>>I have 10 jobs that kick off at the same time every day. Each job
>>>takes
>>>anywhere from 10 minutes to 2 hours. The pool behind these jobs has 4
>>>tape drives and 4 volumes(virtual tapes) assigned to it. The 10 jobs
>>>all
>>>kick off at the same time and they all write to the same volume,
>>>apparently(assuming) interleaving the data. See my paste below, Ive
>>>bolded start times, end times, pools and tapes. One can see these jobs
>>>all completed near each other and ran for over an hour. All to the
>>>same
>>>tape/volume, tape3 and volume AAAACF5F6A . I assume if I had the
>>>"prefer mounted volume=no" for these jobs they would use all 4 drives
>>>in
>>>the pool and write to separate volumes as opposed to interleaving to a
>>>single drive and volume. But based on the manual, reported problems
>>>and
>>>experienced problems with ‘prefer mounted volumes = no’ I hesitate to
>>>use
>>>that.
>>>
>>>My question:
>>>Is there another way to get multiple jobs scheduled at the same time to
>>>run concurrently using different drives and volumes, as assigned to the
>>>pool, versus all writing at the same time and interleaving the data to
>>>a
>>>single drive and volume even though the pool has 4 drives/volumes
>>>assigned to it? Or is prefer mounted volumes = no the only way to
>>>solve this?
>>>
>>>any help is greatly appreciated
>>>
>>>
>>>19-Nov 10:06 backup02-sd JobId 925: Job write elapsed time = 01:01:23,
>>>Transfer rate = 1.489 M Bytes/second
>>>
>>>19-Nov 10:06 backup02-dir JobId 925: Bacula backup02-dir 5.2.6
>>>(21Feb12):
>>>
>>> Build OS: x86_64-pc-linux-gnu ubuntu 14.04
>>>
>>> JobId: 925
>>>
>>> Job: labsdb1.2014-11-19_09.05.00_21
>>>
>>> Backup Level: Full (upgraded from Differential)
>>>
>>> Client: "labsdb1" 2.4.4 (28Dec08)
>>>x86_64-pc-linux-gnu,debian,lenny/sid
>>>
>>> FileSet: "Database Backup" 2014-11-07 22:02:50
>>>
>>> Pool: "database" (From Job resource)
>>>
>>> Catalog: "MyCatalog" (From Client resource)
>>>
>>> Storage: "Tape3" (From Pool resource)
>>>
>>> Scheduled time: 19-Nov-2014 09:05:00
>>>
>>> Start time: 19-Nov-2014 09:05:02
>>>
>>> End time: 19-Nov-2014 10:06:26
>>>
>>> Elapsed time: 1 hour 1 min 24 secs
>>>
>>> Priority: 10
>>>
>>> FD Files Written: 2
>>>
>>> SD Files Written: 2
>>>
>>> FD Bytes Written: 5,486,802,781 (5.486 GB)
>>>
>>> SD Bytes Written: 5,486,802,988 (5.486 GB)
>>>
>>> Rate: 1489.4 KB/s
>>>
>>> Software Compression: None
>>>
>>> VSS: no
>>>
>>> Encryption: no
>>>
>>> Accurate: no
>>>
>>> Volume name(s): AAAACF5F6A
>>>
>>> Volume Session Id: 155
>>>
>>> Volume Session Time: 1415816791
>>>
>>> Last Volume Bytes: 1,348,311,508,992 (1.348 TB)
>>>
>>> Non-fatal FD errors: 0
>>>
>>> SD Errors: 0
>>>
>>> FD termination status: OK
>>>
>>> SD termination status: OK
>>>
>>> Termination: Backup OK
>>>
>>>
>>>19-Nov 10:06 backup02-dir JobId 925: Begin pruning Jobs older than 1
>>>year
>>>.
>>>
>>>19-Nov 10:06 backup02-dir JobId 925: No Jobs found to prune.
>>>
>>>19-Nov 10:06 backup02-dir JobId 925: Begin pruning Files.
>>>
>>>19-Nov 10:06 backup02-dir JobId 925: No Files found to prune.
>>>
>>>19-Nov 10:06 backup02-dir JobId 925: End auto prune.
>>>
>>>
>>>19-Nov 10:41 backup02-sd JobId 919: Job write elapsed time = 01:36:26,
>>>Transfer rate = 2.570 M Bytes/second
>>>
>>>19-Nov 10:41 backup02-dir JobId 919: Bacula backup02-dir 5.2.6
>>>(21Feb12):
>>>
>>> Build OS: x86_64-pc-linux-gnu ubuntu 14.04
>>>
>>> JobId: 919
>>>
>>> Job: shopd1.2014-11-19_09.05.00_15
>>>
>>> Backup Level: Full (upgraded from Differential)
>>>
>>> Client: "shopdb1" 5.0.2 (28Apr10)
>>>x86_64-pc-linux-gnu,debian,squeeze/sid
>>>
>>> FileSet: "varlibDatabase Backup" 2014-11-06 20:20:52
>>>
>>> Pool: "database" (From Job resource)
>>>
>>> Catalog: "MyCatalog" (From Client resource)
>>>
>>> Storage: "Tape3" (From Pool resource)
>>>
>>> Scheduled time: 19-Nov-2014 09:05:00
>>>
>>> Start time: 19-Nov-2014 09:05:00
>>>
>>> End time: 19-Nov-2014 10:41:26
>>>
>>> Elapsed time: 1 hour 36 mins 26 secs
>>>
>>> Priority: 10
>>>
>>> FD Files Written: 3
>>>
>>> SD Files Written: 3
>>>
>>> FD Bytes Written: 14,875,191,024 (14.87 GB)
>>>
>>> SD Bytes Written: 14,875,192,011 (14.87 GB)
>>>
>>> Rate: 2570.9 KB/s
>>>
>>> Software Compression: None
>>>
>>> VSS: no
>>>
>>> Encryption: yes
>>>
>>> Accurate: no
>>>
>>> Volume name(s): AAAACF5F6A
>>>
>>> Volume Session Id: 149
>>>
>>> Volume Session Time: 1415816791
>>>
>>> Last Volume Bytes: 1,375,507,574,784 (1.375 TB)
>>>
>>> Non-fatal FD errors: 0
>>>
>>> SD Errors: 0
>>>
>>> FD termination status: OK
>>>
>>> SD termination status: OK
>>>
>>> Termination: Backup OK
>>>
>>>
>>>19-Nov 10:41 backup02-dir JobId 919: Begin pruning Jobs older than 7
>>>years .
>>>
>>>19-Nov 10:41 backup02-dir JobId 919: No Jobs found to prune.
>>>
>>>19-Nov 10:41 backup02-dir JobId 919: Begin pruning Files.
>>>
>>>19-Nov 10:41 backup02-dir JobId 919: No Files found to prune.
>>>
>>>19-Nov 10:41 backup02-dir JobId 919: End auto prune.
>>>
>>>
>>>
>>>19-Nov 11:10 backup02-sd JobId 917: Job write elapsed time = 02:05:32,
>>>Transfer rate = 3.894 M Bytes/second
>>>
>>>19-Nov 11:10 backup02-dir JobId 917: Bacula backup02-dir 5.2.6
>>>(21Feb12):
>>>
>>> Build OS: x86_64-pc-linux-gnu ubuntu 14.04
>>>
>>> JobId: 917
>>>
>>> Job: pushdb.2014-11-19_09.05.00_13
>>>
>>> Backup Level: Full (upgraded from Differential)
>>>
>>> Client: "pushdb1" 5.0.2 (28Apr10)
>>>x86_64-pc-linux-gnu,debian,6.0.6
>>>
>>> FileSet: "varlibDatabase Backup" 2014-11-06 20:20:52
>>>
>>> Pool: "database" (From Job resource)
>>>
>>> Catalog: "MyCatalog" (From Client resource)
>>>
>>> Storage: "Tape3" (From Pool resource)
>>>
>>> Scheduled time: 19-Nov-2014 09:05:00
>>>
>>> Start time: 19-Nov-2014 09:05:00
>>>
>>> End time: 19-Nov-2014 11:10:33
>>>
>>> Elapsed time: 2 hours 5 mins 33 secs
>>>
>>> Priority: 10
>>>
>>> FD Files Written: 2
>>>
>>> SD Files Written: 2
>>>
>>> FD Bytes Written: 29,334,385,684 (29.33 GB)
>>>
>>> SD Bytes Written: 29,334,385,894 (29.33 GB)
>>>
>>> Rate: 3894.1 KB/s
>>>
>>> Software Compression: None
>>>
>>> VSS: no
>>>
>>> Encryption: no
>>>
>>> Accurate: no
>>>
>>> Volume name(s): AAAACF5F6A
>>>
>>> Volume Session Id: 147
>>>
>>> Volume Session Time: 1415816791
>>>
>>> Last Volume Bytes: 1,397,835,371,520 (1.397 TB)
>>>
>>> Non-fatal FD errors: 1
>>>
>>> SD Errors: 0
>>>
>>> FD termination status: OK
>>>
>>> SD termination status: OK
>>>
>>> Termination: Backup OK
>>>
>>>
>>>19-Nov 11:10 backup02-dir JobId 917: Begin pruning Jobs older than 1
>>>year
>>>.
>>>
>>>19-Nov 11:10 backup02-dir JobId 917: No Jobs found to prune.
>>>
>>>19-Nov 11:10 backup02-dir JobId 917: Begin pruning Files.
>>>
>>>19-Nov 11:10 backup02-dir JobId 917: No Files found to prune.
>>>
>>>19-Nov 11:10 backup02-dir JobId 917: End auto prune.
>>>
>>>
>>>19-Nov 11:26 backup02-sd JobId 915: Job write elapsed time = 02:21:25,
>>>Transfer rate = 3.655 M Bytes/second
>>>
>>>19-Nov 11:26 backup02-dir JobId 915: Bacula backup02-dir 5.2.6
>>>(21Feb12):
>>>
>>> Build OS: x86_64-pc-linux-gnu ubuntu 14.04
>>>
>>> JobId: 915
>>>
>>> Job: ecommdb1.2014-11-19_09.05.00_11
>>>
>>> Backup Level: Differential, since=2014-11-08 09:05:03
>>>
>>> Client: "ecommdb" 2.4.4 (28Dec08)
>>>x86_64-pc-linux-gnu,debian,lenny/sid
>>>
>>> FileSet: "Database Backup" 2014-11-07 22:02:50
>>>
>>> Pool: "database" (From Job resource)
>>>
>>> Catalog: "MyCatalog" (From Client resource)
>>>
>>> Storage: "Tape3" (From Pool resource)
>>>
>>> Scheduled time: 19-Nov-2014 09:05:00
>>>
>>> Start time: 19-Nov-2014 09:05:00
>>>
>>> End time: 19-Nov-2014 11:26:27
>>>
>>> Elapsed time: 2 hours 21 mins 27 secs
>>>
>>> Priority: 10
>>>
>>> FD Files Written: 1
>>>
>>> SD Files Written: 1
>>>
>>> FD Bytes Written: 31,016,183,168 (31.01 GB)
>>>
>>> SD Bytes Written: 31,016,183,295 (31.01 GB)
>>>
>>> Rate: 3654.6 KB/s
>>>
>>> Software Compression: None
>>>
>>> VSS: no
>>>
>>> Encryption: no
>>>
>>> Accurate: no
>>>
>>> Volume name(s): AAAACF5F6A
>>>
>>> Volume Session Id: 145
>>>
>>> Volume Session Time: 1415816791
>>>
>>> Last Volume Bytes: 1,407,107,681,280 (1.407 TB)
>>>
>>> Non-fatal FD errors: 0
>>>
>>> SD Errors: 0
>>>
>>> FD termination status: OK
>>>
>>> SD termination status: OK
>>>
>>> Termination: Backup OK
>>>
>>>
>>>From: "heitor AT bacula.com DOT br<mailto:heitor AT bacula.com DOT br>"
>>><heitor AT bacula.com DOT br<mailto:heitor AT bacula.com DOT br>>
>>>Date: Wednesday, November 19, 2014 at 9:03 AM
>>>To: Josh Fisher <jfisher AT pvct DOT com<mailto:jfisher AT pvct DOT com>>
>>>Cc:
>>>"bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>e
>>>.
>>>net>"
>>><bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>e
>>>.
>>>net>>
>>>Subject: Re: [Bacula-users] bacula can't make use of multi drives
>>>
>>>I think that the only problem with setting "Prefer Mounted Volumes =
>>>no"
>>>is that it will result in a lot of moving of a volume back and forth
>>>between drives. While it might not be a bug, since it works as
>>>advertised, it CAN be a problem. For tape, it will really slow things
>>>down because it takes a substantial time to move a tape out of one
>>>drive
>>>and into another. For disk virtual autochangers, though, the moving
>>>between "drives" is simply closing a disk file and then re-opening it,
>>>meaning that the delay is very negligible.
>>>
>>>Mr. Fisher: It's not just that. Eventually "Prefer Mounted Volumes =
>>>no"
>>>messes up the autochanger during a random backup and you have to
>>>restart
>>>storage daemon and sometimes powercycle the tape library.
>>>
>>>If there is some other issue, like a race condition that I am not aware
>>>of, then that would indeed be a bug in my book. But I have used
>>>PreferMountedVolumes=no for disk virtual autochanger without (so far)
>>>encountering any such problems, just the swapping between drives. And
>>>for
>>>disk virtual autochangers, I don't see that as a problem in and of
>>>itself.
>>>
>>>I don't know if it is already fixed or if this error happens for all
>>>autochangers. But last Bacula System Community Storage whitepapers goes
>>>in the same way. Having 2 pools is still safer and more reliable way to
>>>do multiple volumes writing.
>>>
>>>Regards,
>>>========================================================================
>>>=
>>>Heitor Medrado de Faria - LPIC-III | ITIL-F
>>>Faltam poucos dias - Treinamento Telepresencial Bacula:
>>>http://www.bacula.com.br/?p=2174
>>>61 2021-8260<tel:%2B55%2061%202021-8260> |
>>>8268-4220<tel:%2B55%2061%208268-4220>
>>>Site: www.bacula.com.br<http://www.bacula.com.br/> | Facebook:
>>>heitor.faria<http://www.facebook.com/heitor.faria> | Gtalk:
>>>heitorfaria AT gmail DOT com<mailto:heitorfaria AT gmail DOT com>
>>>========================================================================
>>>=
>>>=
>>>
>>>________________________________
>>>De: "Josh Fisher" <jfisher AT pvct DOT com<mailto:jfisher AT pvct DOT com>>
>>>Para:
>>>bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>.
>>>n
>>>et>
>>>Enviadas: Quarta-feira, 19 de novembro de 2014 14:52:42
>>>Assunto: Re: [Bacula-users] bacula can't make use of multi drives
>>>
>>>On 11/19/2014 11:10 AM,
>>>heitor AT bacula.com DOT br<mailto:heitor AT bacula.com DOT br>
>>>wrote:
>>>Is it a bug that bacula cannot write to multiple drives for the jobs in
>>>the same pool? Will there be a fix. Back in March 2014 Wolfgang Denk
>>>wrote "it can" but how?
>>>
>>>http://adsm.org/lists/html/Bacula-users/2014-03/msg00212.html
>>>
>>>It's not a bug, but just the way it's designed.
>>>"Prefer Mounted Volumes=no" it's a directive that could allow to write
>>>multiple volumes within the same pool at the same time, however this is
>>>a
>>>little buggy and not recommended at this time.
>>>
>>>It's not a bug, but it is a little buggy??
>>>
>>>I think that the only problem with setting "Prefer Mounted Volumes =
>>>no"
>>>is that it will result in a lot of moving of a volume back and forth
>>>between drives. While it might not be a bug, since it works as
>>>advertised, it CAN be a problem. For tape, it will really slow things
>>>down because it takes a substantial time to move a tape out of one
>>>drive
>>>and into another. For disk virtual autochangers, though, the moving
>>>between "drives" is simply closing a disk file and then re-opening it,
>>>meaning that the delay is very negligible.
>>>
>>>If there is some other issue, like a race condition that I am not aware
>>>of, then that would indeed be a bug in my book. But I have used
>>>PreferMountedVolumes=no for disk virtual autochanger without (so far)
>>>encountering any such problems, just the swapping between drives. And
>>>for
>>>disk virtual autochangers, I don't see that as a problem in and of
>>>itself.
>>>
>>>
>>>Regards,
>>>========================================================================
>>>=
>>>Heitor Medrado de Faria - LPIC-III | ITIL-F
>>>Faltam poucos dias - Treinamento Telepresencial Bacula:
>>>http://www.bacula.com.br/?p=2174
>>>61 2021-8260<tel:%2B55%2061%202021-8260> |
>>>8268-4220<tel:%2B55%2061%208268-4220>
>>>Site: www.bacula.com.br<http://www.bacula.com.br/> | Facebook:
>>>heitor.faria<http://www.facebook.com/heitor.faria> | Gtalk:
>>>heitorfaria AT gmail DOT com<mailto:heitorfaria AT gmail DOT com>
>>>========================================================================
>>>=
>>>=
>>>
>>>
>>>
>>>------------------------------------------------------------------------
>>>-
>>>-
>>>----
>>>Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
>>>from Actuate! Instantly Supercharge Your Business Reports and Dashboards
>>>with Interactivity, Sharing, Native Excel Exports, App Integration &
>>>more
>>>Get technology previously reserved for billion-dollar corporations, FREE
>>>http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.cl
>>>k
>>>t
>>>rk
>>>_______________________________________________
>>>Bacula-users mailing list
>>>Bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>.
>>>n
>>>et>
>>>https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>
>>>
>>>------------------------------------------------------------------------
>>>-
>>>-
>>>----
>>>Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
>>>from Actuate! Instantly Supercharge Your Business Reports and Dashboards
>>>with Interactivity, Sharing, Native Excel Exports, App Integration &
>>>more
>>>Get technology previously reserved for billion-dollar corporations, FREE
>>>http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.cl
>>>k
>>>t
>>>rk
>>>_______________________________________________
>>>Bacula-users mailing list
>>>Bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>.
>>>n
>>>et>
>>>https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>------------------------------------------------------------------------
>>>-
>>>-
>>>----
>>>Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
>>>from Actuate! Instantly Supercharge Your Business Reports and Dashboards
>>>with Interactivity, Sharing, Native Excel Exports, App Integration &
>>>more
>>>Get technology previously reserved for billion-dollar corporations, FREE
>>>http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.cl
>>>k
>>>t
>>>rk
>>>
>>>
>>>
>>>_______________________________________________
>>>Bacula-users mailing list
>>>Bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>.
>>>n
>>>et>https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>
>>>
>>>------------------------------------------------------------------------
>>>-
>>>-
>>>----
>>>Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
>>>from Actuate! Instantly Supercharge Your Business Reports and Dashboards
>>>with Interactivity, Sharing, Native Excel Exports, App Integration &
>>>more
>>>Get technology previously reserved for billion-dollar corporations, FREE
>>>http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.cl
>>>k
>>>t
>>>rk
>>>_______________________________________________
>>>Bacula-users mailing list
>>>Bacula-users AT lists.sourceforge DOT
>>>net<mailto:[email protected]
>>>.
>>>n
>>>et>
>>>https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>
>>>
>>>
>>
>>-------------------------------------------------------------------------
>>-
>>----
>>Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
>>from Actuate! Instantly Supercharge Your Business Reports and Dashboards
>>with Interactivity, Sharing, Native Excel Exports, App Integration & more
>>Get technology previously reserved for billion-dollar corporations, FREE
>>http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clk
>>t
>>rk
>>_______________________________________________
>>Bacula-users mailing list
>>Bacula-users AT lists.sourceforge DOT net
>>https://lists.sourceforge.net/lists/listinfo/bacula-users
>
------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
