Re: [Bacula-users] Bacula + Driver HPSA + HP Autoloader 1x8 G2

On 8 February 2015 at 20:32, Isamar Maia <isamar AT gmail DOT com> wrote:

When we need to change tape of another pool(Ex: month or week), it
doesn't load the tape. But it is labeled and in the changer.

08-Fev 13:58 itaparica-sd JobId 48614: Warning: mount.c:217 Open
device "Fita" (/dev/nst0) Volume "KDZ050L4" failed: ERR=dev.c:513
Unable to open device "Fita" (/dev/nst0): ERR=Media not found

[root@Itaparica working]# mtx -f /dev/changer status
Storage Changer /dev/changer:1 Drives, 8 Slots ( 0 Import/Export )
Data Transfer Element 0:Empty
Storage Element 1:Full :VolumeTag=KDZ050L4
Storage Element 2:Full :VolumeTag=KDZ000L4
Storage Element 3:Full :VolumeTag=KDZ001L4
Storage Element 4:Full :VolumeTag=KDZ018L4
Storage Element 5:Full :VolumeTag=KDZ002L4
Storage Element 6:Full :VolumeTag=KDZ011L4
Storage Element 7:Full :VolumeTag=KDZ049L4
Storage Element 8:Full :VolumeTag=KDZ005L4

Maybe it sounds a bit obvious and it has already been done, but if you manipulate the tape library outside of Bacula, you need to "update slots" in bconsole to make sure Bacula knows what has changed. After it gets the correct view of the library slots it can operate on its own.

You cannot discover new oceans unless you have the courage to lose sight of the shore (R. W. Emerson).

http://xkcd.com/229/
http://negativo17.org/

------------------------------------------------------------------------------
Dive into the World of Parallel Programming. The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net/

_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users