Re: [Bacula-users] sg device node stickyness
2014-10-22 11:10:00
On 14-10-22 01:24 AM, Robert Oschwald wrote:
> Using Bacula Server 7.0.4 on CentOS6_64.
>
> One thing which annoys me is that the sg device node for TapeAlert changes
> with every reboot from /dev/sg4 to /dev/sg6 and vice versa.
> Is there any setting I can set in udev to get sticky device nodes for my tape
> device changer device node?
>
> System has a LSI 3Ware 9650SE controller installed which is the one fighting
> for sg device node with my HP Ultrium 4 SCA tape device.
>
> Thanks,
> Robert
>
I use the entries in /dev/tape/by-id/ on my servers - not sure if Centos
has that implemented or not but it's the best way to ensure a consistent
path to a device, even if it changes SCSI controllers or whatever:
$ ls -l /dev/tape/by-id/
total 0
lrwxrwxrwx 1 root root 9 Oct 17 07:30
scsi-1IBM_33622LX_002LX23B4384_LL0 -> ../../sg3
lrwxrwxrwx 1 root root 9 Oct 17 07:30 scsi-1IBM_ULT3580-TD3_1210240676
-> ../../st0
lrwxrwxrwx 1 root root 10 Oct 17 07:30
scsi-1IBM_ULT3580-TD3_1210240676-nst -> ../../nst0
Even if you move the tape drive to another machine, your config stays
the same - my changer will always be on
/dev/tape/by-id/scsi-1IBM_33622LX_002LX23B4384_LL0 and the drive itself
will always be at /dev/tape/by-id/scsi-1IBM_ULT3580-TD3_1210240676
Now, if you happen to replace a tape drive or something you will need to
update the config, but no matter what else happens on the server the
/dev/tape/by-id (and /dev/disk/by-id entries for that matter) will stay
the same.
Bryn
------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://p.sf.net/sfu/Zoho
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
|
|