On 09/09/2014 07:46 PM, Martin Simmons wrote:
> It looks like removing readfifo=yes will not help, because the restore code
> doesn't look at it.
>
> The restore will not work without a process already reading from the fifo.
The simplest Bacula restore doesn't use a fifo. That is what I am
recommending that he try. However it seems that the configuration is
quite complete (at least for me).
Best regards,
Kern
>
> __Martin
>
>
>>>>>> On Tue, 9 Sep 2014 10:57:59 -0400, Kenny Noe said:
>> Kern, et al....
>>
>> I tried another backup. Here is my cliconfig. I parred it down to just
>> the restore stuff.
>> #********************************************************************************
>> # bluewhale
>> #********************************************************************************
>> Client {
>> Name = bluewhale
>> Address = bluewhale.backup.bnesystems.com
>> Catalog = BS01-Catalog
>> Password = "xxxxxx"
>> FileRetention = 15 days
>> JobRetention = 15 days
>> AutoPrune = yes
>> MaximumConcurrentJobs = 1
>> }
>> Job {
>> Name = Restore_mail_bluewhale
>> FileSet = Full_mail_bluewhale
>> Type = Restore
>> Pool = Pool_mail_bluewhale
>> Client = bluewhale
>> Messages = Standard
>> }
>> Pool {
>> Name = Pool_mail_bluewhale
>> PoolType = Backup
>> Storage = Storage_bluewhale
>> MaximumVolumeJobs = 1
>> CatalogFiles = yes
>> AutoPrune = yes
>> VolumeRetention = 1 week
>> Recycle = yes
>> LabelFormat = "mail-"
>> }
>> Storage {
>> Name = Storage_bluewhale
>> Address = 10.10.10.199
>> SDPort = 9103
>> Password = "imadirector"
>> Device = File_bluewhale
>> MediaType = NAS_bluewhale
>> MaximumConcurrentJobs = 1
>> }
>> Schedule {
>> Name = Schedule_mail_bluewhale
>> Run = Level=Full sun-sat at 01:00
>> }
>> FileSet {
>> Name = Full_mail_bluewhale
>> Include {
>> Options {
>> signature=SHA1
>> }
>> File="mail.tar"
>> }
>> }
>>
>>
>> During the restore I ran status storage from the console. I get this
>>
>> *status sto
>> The defined Storage resources are:
>> 1: Storage_asterisk
>> 2: Storage_besc-4dvapp
>> 3: Storage_besc-bs01
>> 4: Storage_besc-unixmgr01
>> 5: Storage_bluewhale
>> 6: Storage_demo
>> 7: Storage_dev
>> 8: Storage_mako
>> Select Storage resource (1-8): 5
>> Connecting to Storage daemon Storage_bluewhale at 10.10.10.199:9103
>>
>> BS01-SD1 Version: 5.2.2 (26 November 2011) x86_64-unknown-linux-gnu ubuntu
>> 11.10
>> Daemon started 09-Sep-14 09:19. Jobs: run=1, running=0.
>> Heap: heap=598,016 smbytes=386,922 max_bytes=405,712 bufs=947 max_bufs=949
>> Sizes: boffset_t=8 size_t=8 int32_t=4 int64_t=8 mode=0,0
>>
>> Running Jobs:
>> Reading: Full Restore job Restore_mail_bluewhale JobId=12922
>> Volume="mail-0386"
>> pool="Pool_mail_bluewhale" device="File_bluewhale"
>> (/nas/bacula/bluewhale)
>> Files=0 Bytes=0 Bytes/sec=0
>> FDReadSeqNo=6 in_msg=6 out_msg=2320699 fd=6
>> ====
>>
>> Jobs waiting to reserve a drive:
>> ====
>>
>> Terminated Jobs:
>> JobId Level Files Bytes Status Finished Name
>> ===================================================================
>> 12913 Incr 108 73.85 M OK 08-Sep-14 20:02 Backup_os_dev
>> 12912 Full 4 61.80 G OK 08-Sep-14 20:24 Backup_app_demo
>> 12914 Incr 230 57.85 M OK 09-Sep-14 00:00
>> Backup_os_asterisk
>> 12916 Incr 31 68.06 M OK 09-Sep-14 00:01
>> Backup_os_besc-unixmgr01
>> 12917 Incr 0 0 Cancel 09-Sep-14 00:03
>> Backup_os_bluewhale
>> 12918 Full 4 501.3 M OK 09-Sep-14 00:04 Backup_app_dev
>> 12915 Incr 256 1.099 G OK 09-Sep-14 00:06
>> Backup_os_besc-bs01
>> 12919 Full 4 54.41 G OK 09-Sep-14 01:04 Backup_app_mako
>> 12920 0 0 Cancel 09-Sep-14 09:17
>> Restore_mail_bluewhale
>> 12921 0 0 OK 09-Sep-14 09:43
>> Restore_mail_bluewhale
>> ====
>>
>> Device status:
>> Device "File_asterisk" (/nas/bacula/asterisk) is not open.
>> Device "File_besc-4dvapp" (/nas/bacula/besc-4dvapp) is not open.
>> Device "File_besc-bs01" (/nas/bacula/besc-bs01) is not open.
>> Device "File_besc-unixmgr01" (/nas/bacula/besc-unixmgr01) is not open.
>> Device "File_bluewhale" (/nas/bacula/bluewhale) is mounted with:
>> Volume: mail-0386
>> Pool: *unknown*
>> Media type: NAS_bluewhale
>> Total Bytes Read=17,923,756,032 Blocks Read=277,836 Bytes/block=64,512
>> Positioned at File=4 Block=743,886,199
>> Device "File_demo" (/nas/bacula/demo) is not open.
>> Device "File_dev" (/nas/bacula/dev) is not open.
>> Device "File_mako" (/nas/bacula/mako) is not open.
>> Device "File_qa" (/nas/bacula/qa) is not open.
>> Device "File_qa2" (/nas/bacula/qa2) is not open.
>> Device "File_smart" (/nas/bacula/smart) is not open.
>> ====
>>
>> Used Volume status:
>> mail-0386 on device "File_bluewhale" (/nas/bacula/bluewhale)
>> Reader=1 writers=0 devres=0 volinuse=1
>> mail-0386 read volume JobId=12922
>> ====
>>
>> ====
>>
>>
>>
>> Why is Pool "*unknown*?? Device status show Total Bytes Read increasing
>> each time I complete a status stirage check, BUT under the "Reading"
>> section it shows "Bytes=0" and Bytes/sec=0"
>>
>> Finally the "job" completes after approx 25 minutes and the log captures
>> this
>>
>>
>> 09-Sep 10:11 BS01-DIR1 JobId 12922: Start Restore Job
>> Restore_mail_bluewhale.2014-09-09_10.11.16_04
>> 09-Sep 10:11 BS01-DIR1 JobId 12922: Using Device "File_bluewhale"
>> 09-Sep 10:11 BS01-SD1 JobId 12922: Ready to read from volume "mail-0386" on
>> device "File_bluewhale" (/nas/bacula/bluewhale).
>> 09-Sep 10:11 BS01-SD1 JobId 12922: Forward spacing Volume "mail-0386" to
>> file:block 0:219.
>> 09-Sep 10:33 BS01-SD1 JobId 12922: End of Volume at file 28 on device
>> "File_bluewhale" (/nas/bacula/bluewhale), Volume "mail-0386"
>> 09-Sep 10:33 BS01-SD1 JobId 12922: End of all volumes.
>> 09-Sep 10:12 BS01-FD1 JobId 12922: Error: create_file.c:292 Could not open
>> /tmp/data/backups/mail/fifo/mail.tar: ERR=Interrupted system call
>> 09-Sep 10:33 BS01-DIR1 JobId 12922: Bacula BS01-DIR1 5.2.2 (26Nov11):
>> Build OS: x86_64-unknown-linux-gnu ubuntu 11.10
>> JobId: 12922
>> Job: Restore_mail_bluewhale.2014-09-09_10.11.16_04
>> Restore Client: besc-bs01
>> Start time: 09-Sep-2014 10:11:18
>> End time: 09-Sep-2014 10:33:31
>> Files Expected: 1
>> Files Restored: 0
>> Bytes Restored: 0
>> Rate: 0.0 KB/s
>> FD Errors: 0
>> FD termination status: OK
>> SD termination status: OK
>> Termination: Restore OK -- warning file count mismatch
>>
>> 09-Sep 10:33 BS01-DIR1 JobId 12922: Begin pruning Jobs older than 15 days .
>> 09-Sep 10:33 BS01-DIR1 JobId 12922: No Jobs found to prune.
>> 09-Sep 10:33 BS01-DIR1 JobId 12922: Begin pruning Files.
>> 09-Sep 10:33 BS01-DIR1 JobId 12922: No Files found to prune.
>> 09-Sep 10:33 BS01-DIR1 JobId 12922: End auto prune.
>>
>>
>> Thoughts??
>>
>> Thanks ----Kenny
>>
>>
>>
>>
>>
>> On Tue, Sep 9, 2014 at 9:56 AM, Kern Sibbald <kern AT sibbald DOT com> wrote:
>>
>>> Hello,
>>>
>>> I would remove the
>>>
>>> readfifo=yes
>>>
>>> though I am not 100% sure it is used on a restore.
>>>
>>> Then simply restore the file "mail.tar" making absolutely sure you have
>>> not marked any directories for restore. Do the restore to /tmp. Then you
>>> will have the mail.tar file that you can detar manually to get your files
>>> back.
>>>
>>> Best regards,
>>> Kern
>>>
>>> On 09/09/2014 03:25 PM, Kenny Noe wrote:
>>>
>>> Ana, Hi! Thanks for the reply... I get the same error no matter where
>>> I try and write to. I've tried to a remote NAS and to local /tmp.
>>>
>>> Kern, below is my Fileset. Should I remove the "Include" statment?
>>>
>>> FileSet {
>>> Name = Full_mail_bluewhale
>>> Include {
>>> Options {
>>> signature=SHA1
>>> readfifo=yes
>>> }
>>> File="/data/backups/mail/fifo/mail.tar"
>>> }
>>> }
>>>
>>>
>>> Thank you all for your comments so far. I'm still trying to complete
>>> the restore, so any input would be appreciated.
>>>
>>> Sincerely,
>>> --Kenny
>>>
>>>
>>> ...
>>>
------------------------------------------------------------------------------
Want excitement?
Manually upgrade your production database.
When you want reliability, choose Perforce.
Perforce version control. Predictably reliable.
http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|