On 09/09/2014 02:34 AM, Kenny Noe wrote:
> Kern,
>
> I tried this tonight. Marked the mail.tar file only and redid the
> restore. It failed again with the same error.
>
> Any other suggestions?
Yes, I probably should have mentioned to remove all runbefore scripts
and any other thing that you may have in the job or in the fileset. It
should be a very simple FileSet that has no plugins, no special condition.
Best regards,
Kern
>
> ---Kenny
>
> On Mon, Sep 8, 2014 at 5:46 PM, Kern Sibbald <kern AT sibbald DOT com> wrote:
>> Hello,
>>
>> It looks to me from the name /fifo/ and the error you are getting that you
>> may be asking Bacula to restore a fifo, and that could easily lead to
>> problems.
>>
>> I suggest one more attempt to restore. Do everything pretty much as you
>> have outlined here, but instead of doing a "mark *" cd down to the file
>> "mail.tar" and mark only it. Then attempt the restore. When you do the
>> mark * you are in fact asking Bacula to restore all the directories at a
>> higher level, and if one is a fifo, that is where there could be problems.
>>
>> Best regards,
>> Kern
>>
>> On 09/08/2014 09:53 PM, Kenny Noe wrote:
>>
>> Heitor,
>>
>> Yes, I did change to local (/tmp) this past attempt.
>>
>> *restore
>>
>> First you select one or more JobIds that contain files
>> to be restored. You will be presented several methods
>> of specifying the JobIds. Then you will be allowed to
>> select which files from those JobIds are to be restored.
>>
>> To select the JobIds, you have the following choices:
>> 1: List last 20 Jobs run
>> 2: List Jobs where a given File is saved
>> 3: Enter list of comma separated JobIds to select
>> 4: Enter SQL list command
>> 5: Select the most recent backup for a client
>> 6: Select backup for a client before a specified time
>> 7: Enter a list of files to restore
>> 8: Enter a list of files to restore before a specified time
>> 9: Find the JobIds of the most recent backup for a client
>> 10: Find the JobIds for a backup for a client before a specified time
>> 11: Enter a list of directories to restore for found JobIds
>> 12: Select full restore to a specified Job date
>> 13: Cancel
>> Select item: (1-13): 3
>> Enter JobId(s), comma separated, to restore: 12510
>> You have selected the following JobId: 12510
>>
>> Building directory tree for JobId(s) 12510 ...
>> 1 files inserted into the tree.
>>
>> You are now entering file selection mode where you add (mark) and
>> remove (unmark) files to be restored. No files are initially added, unless
>> you used the "all" keyword on the command line.
>> Enter "done" to leave this mode.
>>
>> cwd is: /
>> $ mark *
>> 1 file marked.
>> $ done
>> Bootstrap records written to /etc/bacula/BS01-DIR1.restore.3.bsr
>>
>> The job will require the following
>> Volume(s) Storage(s) SD Device(s)
>> ===========================================================================
>>
>> mail-0386 Storage_bluewhale File_bluewhale
>>
>> Volumes marked with "*" are online.
>>
>>
>> 1 file selected to be restored.
>>
>> The defined Restore Job resources are:
>> 1: Restore_os_asterisk
>> 2: Restore_os_besc-4dvapp
>> 3: Restore_db_besc-bs01
>> 4: Restore_os_besc-bs01
>> 5: Restore_os_besc-unixmgr01
>> 6: Restore_mail_bluewhale
>> 7: Restore_os_bluewhale
>> 8: Restore_os_demo
>> 9: Restore_app_demo
>> 10: Restore_os_dev
>> 11: Restore_app_dev
>> 12: Restore_os_mako
>> 13: Restore_app_mako
>> Select Restore Job (1-13): 6
>> Defined Clients:
>> 1: asterisk
>> 2: besc-4dvapp
>> 3: besc-bs01
>> 4: besc-unixmgr01
>> 5: bluewhale
>> 6: demo
>> 7: dev
>> 8: mako
>> 9: qa
>> 10: qa2
>> 11: smart
>> Select the Client (1-11): 5
>> Run Restore job
>> JobName: Restore_mail_bluewhale
>> Bootstrap: /etc/bacula/BS01-DIR1.restore.3.bsr
>> Where: *None*
>> Replace: always
>> FileSet: Full_mail_bluewhale
>> Backup Client: bluewhale
>> Restore Client: bluewhale
>> Storage: Storage_bluewhale
>> When: 2014-09-08 15:29:31
>> Catalog: BS01-Catalog
>> Priority: 10
>> Plugin Options: *None*
>> OK to run? (yes/mod/no): mod
>> Parameters to modify:
>> 1: Level
>> 2: Storage
>> 3: Job
>> 4: FileSet
>> 5: Restore Client
>> 6: When
>> 7: Priority
>> 8: Bootstrap
>> 9: Where
>> 10: File Relocation
>> 11: Replace
>> 12: JobId
>> 13: Plugin Options
>> Select parameter to modify (1-13): 5
>> The defined Client resources are:
>> 1: asterisk
>> 2: besc-4dvapp
>> 3: besc-bs01
>> 4: besc-unixmgr01
>> 5: bluewhale
>> 6: demo
>> 7: dev
>> 8: mako
>> Select Client (File daemon) resource (1-8): 3
>> Run Restore job
>> JobName: Restore_mail_bluewhale
>> Bootstrap: /etc/bacula/BS01-DIR1.restore.3.bsr
>> Where: *None*
>> Replace: always
>> FileSet: Full_mail_bluewhale
>> Backup Client: bluewhale
>> Restore Client: besc-bs01
>> Storage: Storage_bluewhale
>> When: 2014-09-08 15:29:31
>> Catalog: BS01-Catalog
>> Priority: 10
>> Plugin Options: *None*
>> OK to run? (yes/mod/no): mod
>> Parameters to modify:
>> 1: Level
>> 2: Storage
>> 3: Job
>> 4: FileSet
>> 5: Restore Client
>> 6: When
>> 7: Priority
>> 8: Bootstrap
>> 9: Where
>> 10: File Relocation
>> 11: Replace
>> 12: JobId
>> 13: Plugin Options
>> Select parameter to modify (1-13): 9
>> Please enter path prefix for restore (/ for none): /tmp
>> Run Restore job
>> JobName: Restore_mail_bluewhale
>> Bootstrap: /etc/bacula/BS01-DIR1.restore.3.bsr
>> Where: /tmp
>> Replace: always
>> FileSet: Full_mail_bluewhale
>> Backup Client: bluewhale
>> Restore Client: besc-bs01
>> Storage: Storage_bluewhale
>> When: 2014-09-08 15:29:31
>> Catalog: BS01-Catalog
>> Priority: 10
>> Plugin Options: *None*
>> OK to run? (yes/mod/no): yes
>> Job queued. JobId=12903
>>
>>
>> Error
>>
>> 08-Sep 15:29 BS01-DIR1 JobId 12903: Start Restore Job
>> Restore_mail_bluewhale.2014-09-08_15.29.51_05
>> 08-Sep 15:29 BS01-DIR1 JobId 12903: Using Device "File_bluewhale"
>> 08-Sep 15:29 BS01-SD1 JobId 12903: Ready to read from volume "mail-0386" on
>> device "File_bluewhale" (/nas/bacula/bluewhale).
>> 08-Sep 15:29 BS01-SD1 JobId 12903: Forward spacing Volume "mail-0386" to
>> file:block 0:219.
>> 08-Sep 15:51 BS01-SD1 JobId 12903: End of Volume at file 28 on device
>> "File_bluewhale" (/nas/bacula/bluewhale), Volume "mail-0386"
>> 08-Sep 15:51 BS01-SD1 JobId 12903: End of all volumes.
>> 08-Sep 15:30 BS01-FD1 JobId 12903: Error: create_file.c:292 Could not open
>> /tmp/data/backups/mail/fifo/mail.tar: ERR=Interrupted system call
>> 08-Sep 15:51 BS01-DIR1 JobId 12903: Bacula BS01-DIR1 5.2.2 (26Nov11):
>> Build OS: x86_64-unknown-linux-gnu ubuntu 11.10
>> JobId: 12903
>> Job: Restore_mail_bluewhale.2014-09-08_15.29.51_05
>> Restore Client: besc-bs01
>> Start time: 08-Sep-2014 15:29:53
>> End time: 08-Sep-2014 15:51:58
>> Files Expected: 1
>> Files Restored: 0
>> Bytes Restored: 0
>> Rate: 0.0 KB/s
>> FD Errors: 0
>> FD termination status: OK
>> SD termination status: OK
>> Termination: Restore OK -- warning file count mismatch
>>
>> 08-Sep 15:51 BS01-DIR1 JobId 12903: Begin pruning Jobs older than 15 days .
>> 08-Sep 15:51 BS01-DIR1 JobId 12903: No Jobs found to prune.
>> 08-Sep 15:51 BS01-DIR1 JobId 12903: Begin pruning Files.
>> 08-Sep 15:51 BS01-DIR1 JobId 12903: No Files found to prune.
>> 08-Sep 15:51 BS01-DIR1 JobId 12903: End auto prune.
>>
>>
>>
>>
>>
>> On Mon, Sep 8, 2014 at 3:45 PM, Heitor Faria <heitor AT bacula.com DOT br>
>> wrote:
>>> Kenny,
>>>
>>> Again it looks like you haven't change the Where variable to a local
>>> server directory and kept using: /nas/users/admin/
>>> Could you please try any other directory? E. g.: /tmp?
>>> NAS can be tricky and its a whole different ACL system. Trying to restore
>>> files directly on a mount point may lead you to this error.
>>>
>>> Regards and good luck,
>>>
>>>
>>> On Mon, Sep 8, 2014 at 4:39 PM, Kenny Noe <knoe501 AT gmail DOT com> wrote:
>>>> I've tried all day to restore this file. Ran 12 restores today. All
>>>> have the same result. I get an empty file.
>>>>
>>>> This worked once 3 months ago when I completed a restore of this file to
>>>> the original server, but now that server is gone I can't restore the file!
>>>>
>>>> Sorry to vent my frustration but I've no one else to bounce ideas off.
>>>>
>>>> --Kenny
>>>>
>>>> Error:
>>>> 08-Sep 15:03 BS01-DIR1 JobId 12902: Start Restore Job
>>>> Restore_mail_bluewhale.2014-09-08_15.03.32_04
>>>> 08-Sep 15:03 BS01-DIR1 JobId 12902: Using Device "File_bluewhale"
>>>> 08-Sep 15:03 BS01-SD1 JobId 12902: Ready to read from volume "mail-0386"
>>>> on device "File_bluewhale" (/nas/bacula/bluewhale).
>>>> 08-Sep 15:03 BS01-SD1 JobId 12902: Forward spacing Volume "mail-0386" to
>>>> file:block 0:219.
>>>> 08-Sep 15:25 BS01-SD1 JobId 12902: End of Volume at file 28 on device
>>>> "File_bluewhale" (/nas/bacula/bluewhale), Volume "mail-0386"
>>>> 08-Sep 15:25 BS01-SD1 JobId 12902: End of all volumes.
>>>> 08-Sep 15:04 BS01-FD1 JobId 12902: Error: create_file.c:292 Could not
>>>> open /nas/users/admin/backups/data/backups/mail/fifo/mail.tar:
>>>> ERR=Interrupted system call
>>>> 08-Sep 15:25 BS01-DIR1 JobId 12902: Bacula BS01-DIR1 5.2.2 (26Nov11):
>>>> Build OS: x86_64-unknown-linux-gnu ubuntu 11.10
>>>> JobId: 12902
>>>> Job: Restore_mail_bluewhale.2014-09-08_15.03.32_04
>>>> Restore Client: besc-bs01
>>>> Start time: 08-Sep-2014 15:03:34
>>>> End time: 08-Sep-2014 15:25:46
>>>> Files Expected: 1
>>>> Files Restored: 0
>>>> Bytes Restored: 0
>>>> Rate: 0.0 KB/s
>>>> FD Errors: 0
>>>> FD termination status: OK
>>>> SD termination status: OK
>>>> Termination: Restore OK -- warning file count mismatch
>>>>
>>>> 08-Sep 15:25 BS01-DIR1 JobId 12902: Begin pruning Jobs older than 15 days
>>>> .
>>>> 08-Sep 15:25 BS01-DIR1 JobId 12902: No Jobs found to prune.
>>>> 08-Sep 15:25 BS01-DIR1 JobId 12902: Begin pruning Files.
>>>> 08-Sep 15:25 BS01-DIR1 JobId 12902: No Files found to prune.
>>>> 08-Sep 15:25 BS01-DIR1 JobId 12902: End auto prune.
>>>>
>>>>
>>>>
>>>> On Mon, Sep 8, 2014 at 3:28 PM, Kenny Noe <knoe501 AT gmail DOT com> wrote:
>>>>> Heitor,
>>>>>
>>>>> /nas/bacula/bluewhale is a path on besc-bs01. This is where the Bacula
>>>>> backup are put. mail-0386 is the bacula volume I'm trying to restore.
>>>>> I'll
>>>>> try a local location to restore.
>>>>>
>>>>> Thanks --Kenny
>>>>>
>>>>>
>>>>> On Mon, Sep 8, 2014 at 3:24 PM, Heitor Faria <heitor AT bacula.com DOT br>
>>>>> wrote:
>>>>>> Kenny,
>>>>>>
>>>>>> Is this path (/nas/bacula/bluewhale) a path to a NAS mount point in
>>>>>> besc-bs01 client? If yes, this might be the cause of the writing error.
>>>>>> Did you try to restore to a local client directory? E. g.: /tmp?
>>>>>>
>>>>>>
>>>>>> On Mon, Sep 8, 2014 at 4:12 PM, Kenny Noe <knoe501 AT gmail DOT com>
>>>>>> wrote:
>>>>>>> Sorry, failed to include the list...
>>>>>>>
>>>>>>> ---Kenny
>>>>>>>
>>>>>>> ---------- Forwarded message ----------
>>>>>>> From: Kenny Noe <knoe501 AT gmail DOT com>
>>>>>>> Date: Mon, Sep 8, 2014 at 1:25 PM
>>>>>>> Subject: Re: [Bacula-users] Restore from dead client
>>>>>>> To: Dan Langille <dan AT langille DOT org>
>>>>>>>
>>>>>>>
>>>>>>> Gents.... Following instructions.
>>>>>>>
>>>>>>> Appreciate your time...
>>>>>>>
>>>>>>> --Kenny
>>>>>>>
>>>>>>> *************************************
>>>>>>> Complete screen capture of restore....
>>>>>>>
>>>>>>> *restore
>>>>>>>
>>>>>>> First you select one or more JobIds that contain files
>>>>>>> to be restored. You will be presented several methods
>>>>>>> of specifying the JobIds. Then you will be allowed to
>>>>>>> select which files from those JobIds are to be restored.
>>>>>>>
>>>>>>> To select the JobIds, you have the following choices:
>>>>>>> 1: List last 20 Jobs run
>>>>>>> 2: List Jobs where a given File is saved
>>>>>>> 3: Enter list of comma separated JobIds to select
>>>>>>> 4: Enter SQL list command
>>>>>>> 5: Select the most recent backup for a client
>>>>>>> 6: Select backup for a client before a specified time
>>>>>>> 7: Enter a list of files to restore
>>>>>>> 8: Enter a list of files to restore before a specified time
>>>>>>> 9: Find the JobIds of the most recent backup for a client
>>>>>>> 10: Find the JobIds for a backup for a client before a specified
>>>>>>> time
>>>>>>> 11: Enter a list of directories to restore for found JobIds
>>>>>>> 12: Select full restore to a specified Job date
>>>>>>> 13: Cancel
>>>>>>> Select item: (1-13): 3
>>>>>>> Enter JobId(s), comma separated, to restore: 12510
>>>>>>> You have selected the following JobId: 12510
>>>>>>>
>>>>>>> Building directory tree for JobId(s) 12510 ...
>>>>>>> 1 files inserted into the tree.
>>>>>>>
>>>>>>> You are now entering file selection mode where you add (mark) and
>>>>>>> remove (unmark) files to be restored. No files are initially added,
>>>>>>> unless
>>>>>>> you used the "all" keyword on the command line.
>>>>>>> Enter "done" to leave this mode.
>>>>>>>
>>>>>>> cwd is: /
>>>>>>> $ mark *
>>>>>>> 1 file marked.
>>>>>>> $ done
>>>>>>> Bootstrap records written to /etc/bacula/BS01-DIR1.restore.4.bsr
>>>>>>>
>>>>>>> The job will require the following
>>>>>>> Volume(s) Storage(s) SD Device(s)
>>>>>>>
>>>>>>> ===========================================================================
>>>>>>>
>>>>>>> mail-0386 Storage_bluewhale File_bluewhale
>>>>>>>
>>>>>>> Volumes marked with "*" are online.
>>>>>>>
>>>>>>>
>>>>>>> 1 file selected to be restored.
>>>>>>>
>>>>>>> The defined Restore Job resources are:
>>>>>>> 1: Restore_os_asterisk
>>>>>>> 2: Restore_os_besc-4dvapp
>>>>>>> 3: Restore_db_besc-bs01
>>>>>>> 4: Restore_os_besc-bs01
>>>>>>> 5: Restore_os_besc-unixmgr01
>>>>>>> 6: Restore_mail_bluewhale
>>>>>>> 7: Restore_os_demo
>>>>>>> 8: Restore_app_demo
>>>>>>> 9: Restore_os_dev
>>>>>>> 10: Restore_app_dev
>>>>>>> 11: Restore_os_mako
>>>>>>> 12: Restore_app_mako
>>>>>>> Select Restore Job (1-12): 6
>>>>>>> Defined Clients:
>>>>>>> 1: asterisk
>>>>>>> 2: besc-4dvapp
>>>>>>> 3: besc-bs01
>>>>>>> 4: besc-unixmgr01
>>>>>>> 5: bluewhale
>>>>>>> 6: demo
>>>>>>> 7: dev
>>>>>>> 8: mako
>>>>>>> 9: qa
>>>>>>> 10: qa2
>>>>>>> 11: smart
>>>>>>> Select the Client (1-11): 5
>>>>>>> Run Restore job
>>>>>>> JobName: Restore_mail_bluewhale
>>>>>>> Bootstrap: /etc/bacula/BS01-DIR1.restore.4.bsr
>>>>>>> Where: *None*
>>>>>>> Replace: always
>>>>>>> FileSet: Full_mail_bluewhale
>>>>>>> Backup Client: bluewhale
>>>>>>> Restore Client: bluewhale
>>>>>>> Storage: Storage_bluewhale
>>>>>>> When: 2014-09-08 13:22:56
>>>>>>> Catalog: BS01-Catalog
>>>>>>> Priority: 10
>>>>>>> Plugin Options: *None*
>>>>>>> OK to run? (yes/mod/no): mod
>>>>>>> Parameters to modify:
>>>>>>> 1: Level
>>>>>>> 2: Storage
>>>>>>> 3: Job
>>>>>>> 4: FileSet
>>>>>>> 5: Restore Client
>>>>>>> 6: When
>>>>>>> 7: Priority
>>>>>>> 8: Bootstrap
>>>>>>> 9: Where
>>>>>>> 10: File Relocation
>>>>>>> 11: Replace
>>>>>>> 12: JobId
>>>>>>> 13: Plugin Options
>>>>>>> Select parameter to modify (1-13): 5
>>>>>>> The defined Client resources are:
>>>>>>> 1: asterisk
>>>>>>> 2: besc-4dvapp
>>>>>>> 3: besc-bs01
>>>>>>> 4: besc-unixmgr01
>>>>>>> 5: bluewhale
>>>>>>> 6: demo
>>>>>>> 7: dev
>>>>>>> 8: mako
>>>>>>> Select Client (File daemon) resource (1-8): 3
>>>>>>> Run Restore job
>>>>>>> JobName: Restore_mail_bluewhale
>>>>>>> Bootstrap: /etc/bacula/BS01-DIR1.restore.4.bsr
>>>>>>> Where: *None*
>>>>>>> Replace: always
>>>>>>> FileSet: Full_mail_bluewhale
>>>>>>> Backup Client: bluewhale
>>>>>>> Restore Client: besc-bs01
>>>>>>> Storage: Storage_bluewhale
>>>>>>> When: 2014-09-08 13:22:56
>>>>>>> Catalog: BS01-Catalog
>>>>>>> Priority: 10
>>>>>>> Plugin Options: *None*
>>>>>>> OK to run? (yes/mod/no): mod
>>>>>>> Parameters to modify:
>>>>>>> 1: Level
>>>>>>> 2: Storage
>>>>>>> 3: Job
>>>>>>> 4: FileSet
>>>>>>> 5: Restore Client
>>>>>>> 6: When
>>>>>>> 7: Priority
>>>>>>> 8: Bootstrap
>>>>>>> 9: Where
>>>>>>> 10: File Relocation
>>>>>>> 11: Replace
>>>>>>> 12: JobId
>>>>>>> 13: Plugin Options
>>>>>>> Select parameter to modify (1-13): 9
>>>>>>> Please enter path prefix for restore (/ for none):
>>>>>>> /nas/users/admin/backups
>>>>>>> Run Restore job
>>>>>>> JobName: Restore_mail_bluewhale
>>>>>>> Bootstrap: /etc/bacula/BS01-DIR1.restore.4.bsr
>>>>>>> Where: /nas/users/admin/backups
>>>>>>> Replace: always
>>>>>>> FileSet: Full_mail_bluewhale
>>>>>>> Backup Client: bluewhale
>>>>>>> Restore Client: besc-bs01
>>>>>>> Storage: Storage_bluewhale
>>>>>>> When: 2014-09-08 13:22:56
>>>>>>> Catalog: BS01-Catalog
>>>>>>> Priority: 10
>>>>>>> Plugin Options: *None*
>>>>>>> OK to run? (yes/mod/no): yes
>>>>>>> Job queued. JobId=12899
>>>>>>> *
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Mon, Sep 8, 2014 at 1:16 PM, Dan Langille <dan AT langille DOT org>
>>>>>>> wrote:
>>>>>>>> Kenny:
>>>>>>>>
>>>>>>>> Please run the restore job again and then copy/paste the entire
>>>>>>>> session from bcsonole. Thank you.
>>>>>>>>
>>>>>>>>
>>>>>>>> On Sep 8, 2014, at 1:15 PM, Heitor Faria <heitor AT bacula.com DOT br>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>> Kenny,
>>>>>>>>
>>>>>>>> Ok. Sorry for the confusion about the bluewhale client. This is why
>>>>>>>> we need your full restore command, to see exactly what's happening..
>>>>>>>> You should not change your Backup Client at the restore, even if the
>>>>>>>> restore is dead. You should change your Restore Client. It would be
>>>>>>>> nice to
>>>>>>>> inform its version too.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> On Mon, Sep 8, 2014 at 2:11 PM, Kenny Noe <knoe501 AT gmail DOT com>
>>>>>>>> wrote:
>>>>>>>>> Heitor,
>>>>>>>>>
>>>>>>>>> Pardon my ignorance, but i don't follow your questions...
>>>>>>>>>
>>>>>>>>> My original client "bluewhale" experienced a terrible HD failure
>>>>>>>>> thus the need to recover. I have been changing the "client" and
>>>>>>>>> "where"
>>>>>>>>> parameters when walking thru the restore procedure. When the restore
>>>>>>>>> process runs it creates the requested file "mail.tar" but there are
>>>>>>>>> zero
>>>>>>>>> bytes.
>>>>>>>>>
>>>>>>>>> If you get me a bit more to go on I'll gladly share input / output
>>>>>>>>> for the request.
>>>>>>>>>
>>>>>>>>> Thanks --Kenny
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Mon, Sep 8, 2014 at 12:57 PM, Heitor Faria <heitor AT bacula.com
>>>>>>>>> DOT br>
>>>>>>>>> wrote:
>>>>>>>>>> Kenny,
>>>>>>>>>>
>>>>>>>>>> 1. Could you reproduce the input you used at the restore
>>>>>>>>>> submission?
>>>>>>>>>> 2. Can you tell the client bluewhale version?
>>>>>>>>>>
>>>>>>>>>> Regards,
>>>>>>>>>>
>>>>>>>>>> On Mon, Sep 8, 2014 at 1:48 PM, Kenny Noe <knoe501 AT gmail DOT com>
>>>>>>>>>> wrote:
>>>>>>>>>>> Heitor,
>>>>>>>>>>>
>>>>>>>>>>> Hi! Thanks for the reply.... I'm utilizing a console and the
>>>>>>>>>>> Bacula console and executing a "restore" command then walking thru
>>>>>>>>>>> the
>>>>>>>>>>> prompts given. What is this "run" command? Yes, I believe I'm
>>>>>>>>>>> trying to
>>>>>>>>>>> restore the same file, but it's not working.
>>>>>>>>>>>
>>>>>>>>>>> Thoughts?
>>>>>>>>>>>
>>>>>>>>>>> Thanks --Kenny
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Sep 8, 2014 at 12:41 PM, Heitor Faria
>>>>>>>>>>> <heitor AT bacula.com DOT br> wrote:
>>>>>>>>>>>> Kenny,
>>>>>>>>>>>>
>>>>>>>>>>>> First of all, are you using the "run" command to submit a prior
>>>>>>>>>>>> configured Restore Job? I think this is not advisable, since there
>>>>>>>>>>>> are
>>>>>>>>>>>> several restore variables that only the "restore" command can
>>>>>>>>>>>> fetch.
>>>>>>>>>>>> Did you try to restore the same file with the restore command?
>>>>>>>>>>>>
>>>>>>>>>>>> Regards,
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Mon, Sep 8, 2014 at 1:28 PM, Kenny Noe <knoe501 AT gmail DOT
>>>>>>>>>>>> com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>> Dan,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks for the reply. I tried this this morning and still
>>>>>>>>>>>>> failed the restore. I see during the Status Storage -
>>>>>>>>>>>>> Storage_Bluewhale
>>>>>>>>>>>>> where the "Running Jobs section shows Files=0, Bytes=0
>>>>>>>>>>>>> Bytes/sec=0. However
>>>>>>>>>>>>> in the Device Status section, Device "File_bluewhale" is mounted
>>>>>>>>>>>>> and the
>>>>>>>>>>>>> Total Bytes Read and Block Read go up.... Now with the
>>>>>>>>>>>>> simplefied config
>>>>>>>>>>>>> It seems to have lost it's Pool.
>>>>>>>>>>>>>
>>>>>>>>>>>>> I'm confused... I changed the where to restore to
>>>>>>>>>>>>> /nas/users/admin/backups and changed in the client config to
>>>>>>>>>>>>> remove the fifo
>>>>>>>>>>>>> headache... But it still is trying to use it...
>>>>>>>>>>>>>
>>>>>>>>>>>>> Here is the error from the log :
>>>>>>>>>>>>> 08-Sep 11:51 BS01-DIR1 JobId 12897: Start Restore Job
>>>>>>>>>>>>> Restore_mail_bluewhale.2014-09-08_11.51.55_03
>>>>>>>>>>>>> 08-Sep 11:51 BS01-DIR1 JobId 12897: Using Device
>>>>>>>>>>>>> "File_bluewhale"
>>>>>>>>>>>>> 08-Sep 11:51 BS01-SD1 JobId 12897: Ready to read from volume
>>>>>>>>>>>>> "mail-0386" on device "File_bluewhale" (/nas/bacula/bluewhale).
>>>>>>>>>>>>> 08-Sep 11:51 BS01-SD1 JobId 12897: Forward spacing Volume
>>>>>>>>>>>>> "mail-0386" to file:block 0:219.
>>>>>>>>>>>>> 08-Sep 12:14 BS01-SD1 JobId 12897: End of Volume at file 28 on
>>>>>>>>>>>>> device "File_bluewhale" (/nas/bacula/bluewhale), Volume
>>>>>>>>>>>>> "mail-0386"
>>>>>>>>>>>>> 08-Sep 12:14 BS01-SD1 JobId 12897: End of all volumes.
>>>>>>>>>>>>> 08-Sep 11:52 BS01-FD1 JobId 12897: Error: create_file.c:292
>>>>>>>>>>>>> Could not open
>>>>>>>>>>>>> /nas/users/admin/backups/data/backups/mail/fifo/mail.tar:
>>>>>>>>>>>>> ERR=Interrupted system call
>>>>>>>>>>>>> 08-Sep 12:14 BS01-DIR1 JobId 12897: Bacula BS01-DIR1 5.2.2
>>>>>>>>>>>>> (26Nov11):
>>>>>>>>>>>>> Build OS: x86_64-unknown-linux-gnu ubuntu 11.10
>>>>>>>>>>>>> JobId: 12897
>>>>>>>>>>>>> Job:
>>>>>>>>>>>>> Restore_mail_bluewhale.2014-09-08_11.51.55_03
>>>>>>>>>>>>> Restore Client: besc-bs01
>>>>>>>>>>>>> Start time: 08-Sep-2014 11:51:57
>>>>>>>>>>>>> End time: 08-Sep-2014 12:14:09
>>>>>>>>>>>>> Files Expected: 1
>>>>>>>>>>>>> Files Restored: 0
>>>>>>>>>>>>> Bytes Restored: 0
>>>>>>>>>>>>> Rate: 0.0 KB/s
>>>>>>>>>>>>> FD Errors: 0
>>>>>>>>>>>>> FD termination status: OK
>>>>>>>>>>>>> SD termination status: OK
>>>>>>>>>>>>> Termination: Restore OK -- warning file count
>>>>>>>>>>>>> mismatch
>>>>>>>>>>>>>
>>>>>>>>>>>>> 08-Sep 12:14 BS01-DIR1 JobId 12897: Begin pruning Jobs older
>>>>>>>>>>>>> than 15 days .
>>>>>>>>>>>>> 08-Sep 12:14 BS01-DIR1 JobId 12897: No Jobs found to prune.
>>>>>>>>>>>>> 08-Sep 12:14 BS01-DIR1 JobId 12897: Begin pruning Files.
>>>>>>>>>>>>> 08-Sep 12:14 BS01-DIR1 JobId 12897: No Files found to prune.
>>>>>>>>>>>>> 08-Sep 12:14 BS01-DIR1 JobId 12897: End auto prune.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> What is a file count mismatch?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Here is the status during a restore :
>>>>>>>>>>>>> Connecting to Storage daemon Storage_bluewhale at
>>>>>>>>>>>>> 10.10.10.199:9103
>>>>>>>>>>>>>
>>>>>>>>>>>>> BS01-SD1 Version: 5.2.2 (26 November 2011)
>>>>>>>>>>>>> x86_64-unknown-linux-gnu ubuntu 11.10
>>>>>>>>>>>>> Daemon started 08-Sep-14 11:48. Jobs: run=0, running=0.
>>>>>>>>>>>>> Heap: heap=598,016 smbytes=386,922 max_bytes=405,712 bufs=947
>>>>>>>>>>>>> max_bufs=949
>>>>>>>>>>>>> Sizes: boffset_t=8 size_t=8 int32_t=4 int64_t=8 mode=0,0
>>>>>>>>>>>>>
>>>>>>>>>>>>> Running Jobs:
>>>>>>>>>>>>> Reading: Full Restore job Restore_mail_bluewhale JobId=12897
>>>>>>>>>>>>> Volume="mail-0386"
>>>>>>>>>>>>> pool="Pool_mail_bluewhale" device="File_bluewhale"
>>>>>>>>>>>>> (/nas/bacula/bluewhale)
>>>>>>>>>>>>> Files=0 Bytes=0 Bytes/sec=0
>>>>>>>>>>>>> FDReadSeqNo=6 in_msg=6 out_msg=84529 fd=6
>>>>>>>>>>>>> ====
>>>>>>>>>>>>>
>>>>>>>>>>>>> Jobs waiting to reserve a drive:
>>>>>>>>>>>>> ====
>>>>>>>>>>>>>
>>>>>>>>>>>>> Terminated Jobs:
>>>>>>>>>>>>> JobId Level Files Bytes Status Finished
>>>>>>>>>>>>> Name
>>>>>>>>>>>>>
>>>>>>>>>>>>> ===================================================================
>>>>>>>>>>>>> 12889 Incr 31 67.94 M OK 08-Sep-14 00:01
>>>>>>>>>>>>> Backup_os_besc-unixmgr01
>>>>>>>>>>>>> 12891 Full 4 501.0 M OK 08-Sep-14 00:05
>>>>>>>>>>>>> Backup_app_dev
>>>>>>>>>>>>> 12888 Incr 437 1.158 G OK 08-Sep-14 00:06
>>>>>>>>>>>>> Backup_os_besc-bs01
>>>>>>>>>>>>> 12890 Incr 0 0 Other 08-Sep-14 00:30
>>>>>>>>>>>>> Backup_os_bluewhale
>>>>>>>>>>>>> 12893 Full 0 0 Other 08-Sep-14 01:30
>>>>>>>>>>>>> Backup_mail_bluewhale
>>>>>>>>>>>>> 12884 Full 2,361,101 154.6 G OK 08-Sep-14 04:46
>>>>>>>>>>>>> Backup_os_mako
>>>>>>>>>>>>> 12892 Full 4 54.40 G OK 08-Sep-14 05:56
>>>>>>>>>>>>> Backup_app_mako
>>>>>>>>>>>>> 12894 0 0 OK 08-Sep-14 08:53
>>>>>>>>>>>>> Restore_mail_bluewhale
>>>>>>>>>>>>> 12895 0 0 OK 08-Sep-14 09:28
>>>>>>>>>>>>> Restore_mail_bluewhale
>>>>>>>>>>>>> 12896 0 0 OK 08-Sep-14 10:10
>>>>>>>>>>>>> Restore_mail_bluewhale
>>>>>>>>>>>>> ====
>>>>>>>>>>>>>
>>>>>>>>>>>>> Device status:
>>>>>>>>>>>>> Device "File_asterisk" (/nas/bacula/asterisk) is not open.
>>>>>>>>>>>>> Device "File_besc-4dvapp" (/nas/bacula/besc-4dvapp) is not open.
>>>>>>>>>>>>> Device "File_besc-bs01" (/nas/bacula/besc-bs01) is not open.
>>>>>>>>>>>>> Device "File_besc-unixmgr01" (/nas/bacula/besc-unixmgr01) is not
>>>>>>>>>>>>> open.
>>>>>>>>>>>>> Device "File_bluewhale" (/nas/bacula/bluewhale) is mounted with:
>>>>>>>>>>>>> Volume: mail-0386
>>>>>>>>>>>>> Pool: *unknown*
>>>>>>>>>>>>> Media type: NAS_bluewhale
>>>>>>>>>>>>> Total Bytes Read=1,121,412,096 Blocks Read=17,383
>>>>>>>>>>>>> Bytes/block=64,512
>>>>>>>>>>>>> Positioned at File=0 Block=1,121,412,275
>>>>>>>>>>>>> Device "File_demo" (/nas/bacula/demo) is not open.
>>>>>>>>>>>>> Device "File_dev" (/nas/bacula/dev) is not open.
>>>>>>>>>>>>> Device "File_mako" (/nas/bacula/mako) is not open.
>>>>>>>>>>>>> Device "File_qa" (/nas/bacula/qa) is not open.
>>>>>>>>>>>>> Device "File_qa2" (/nas/bacula/qa2) is not open.
>>>>>>>>>>>>> Device "File_smart" (/nas/bacula/smart) is not open.
>>>>>>>>>>>>> ====
>>>>>>>>>>>>>
>>>>>>>>>>>>> Used Volume status:
>>>>>>>>>>>>> mail-0386 on device "File_bluewhale" (/nas/bacula/bluewhale)
>>>>>>>>>>>>> Reader=1 writers=0 devres=0 volinuse=1
>>>>>>>>>>>>> mail-0386 read volume JobId=12897
>>>>>>>>>>>>> ====
>>>>>>>>>>>>>
>>>>>>>>>>>>> ====
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Here is my simplified client config:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> #********************************************************************************
>>>>>>>>>>>>> # bluewhale
>>>>>>>>>>>>>
>>>>>>>>>>>>> #********************************************************************************
>>>>>>>>>>>>> Client {
>>>>>>>>>>>>> Name = bluewhale
>>>>>>>>>>>>> Address = bluewhale.bnesystems.com
>>>>>>>>>>>>> Catalog = BS01-Catalog
>>>>>>>>>>>>> Password = "xxxxxxxxx"
>>>>>>>>>>>>> FileRetention = 365 days
>>>>>>>>>>>>> JobRetention = 365 days
>>>>>>>>>>>>> AutoPrune = yes
>>>>>>>>>>>>> MaximumConcurrentJobs = 1
>>>>>>>>>>>>> }
>>>>>>>>>>>>> Job {
>>>>>>>>>>>>> Name = Restore_mail_bluewhale
>>>>>>>>>>>>> FileSet = Full_mail_bluewhale
>>>>>>>>>>>>> Type = Restore
>>>>>>>>>>>>> Pool = Pool_mail_bluewhale
>>>>>>>>>>>>> Client = bluewhale
>>>>>>>>>>>>> Messages = Standard
>>>>>>>>>>>>> }
>>>>>>>>>>>>> Pool {
>>>>>>>>>>>>> Name = Pool_mail_bluewhale
>>>>>>>>>>>>> PoolType = Backup
>>>>>>>>>>>>> Storage = Storage_bluewhale
>>>>>>>>>>>>> MaximumVolumeJobs = 1
>>>>>>>>>>>>> CatalogFiles = yes
>>>>>>>>>>>>> AutoPrune = yes
>>>>>>>>>>>>> VolumeRetention = 365 days
>>>>>>>>>>>>> Recycle = yes
>>>>>>>>>>>>> LabelFormat = "mail-"
>>>>>>>>>>>>> }
>>>>>>>>>>>>> Storage {
>>>>>>>>>>>>> Name = Storage_bluewhale
>>>>>>>>>>>>> Address = 10.10.10.199
>>>>>>>>>>>>> SDPort = 9103
>>>>>>>>>>>>> Password = "xxxxxxx"
>>>>>>>>>>>>> Device = File_bluewhale
>>>>>>>>>>>>> MediaType = NAS_bluewhale
>>>>>>>>>>>>> MaximumConcurrentJobs = 1
>>>>>>>>>>>>> }
>>>>>>>>>>>>> FileSet {
>>>>>>>>>>>>> Name = Full_mail_bluewhale
>>>>>>>>>>>>> Include {
>>>>>>>>>>>>> Options {
>>>>>>>>>>>>> signature=SHA1
>>>>>>>>>>>>> # readfifo=yes
>>>>>>>>>>>>> }
>>>>>>>>>>>>> File="/mail.tar"
>>>>>>>>>>>>> }
>>>>>>>>>>>>> }
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks for the help. I appreciate all the input.
>>>>>>>>>>>>>
>>>>>>>>>>>>> --Kenny
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Sun, Sep 7, 2014 at 8:22 AM, Dan Langille <dan AT langille DOT
>>>>>>>>>>>>> org>
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>> I suggest removing the before & after scripts.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Dan Langille
>>>>>>>>>>>>>> http://langille.org/
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Sep 6, 2014, at 8:38 PM, Kenny Noe <knoe501 AT gmail DOT com>
>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Dan,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Appreciate the reply.... Yes this is exactly what I want to
>>>>>>>>>>>>>>> do.
>>>>>>>>>>>>>>> However when I try to just do a "simple" restore, the job
>>>>>>>>>>>>>>> finishes
>>>>>>>>>>>>>>> with the error previously given.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Any suggestions to do this would be appreciated.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks --Kenny
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Sat, Sep 6, 2014 at 5:51 PM, Dan Langille
>>>>>>>>>>>>>>>> <dan AT langille DOT org> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Sep 5, 2014, at 5:48 PM, Kenny Noe <knoe501 AT gmail DOT
>>>>>>>>>>>>>>>> com>
>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Birre,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks for the reply. I guess this is where I get lost...
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> The fifo is reading a file that was created in the
>>>>>>>>>>>>>>>> pre-process called
>>>>>>>>>>>>>>>> mail.tar. The mail.tar is made from the following
>>>>>>>>>>>>>>>> directories /opt/zimbra
>>>>>>>>>>>>>>>> and /var/mail/zimbra. This is where the Zimbra files and
>>>>>>>>>>>>>>>> mailstore were
>>>>>>>>>>>>>>>> kept.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> This pre-process is a script that has this :
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> MailBackup.bash
>>>>>>>>>>>>>>>> #!/bin/bash
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> exec >/dev/null
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> MKDIR="/bin/mkdir"
>>>>>>>>>>>>>>>> MKFIFO="/usr/bin/mkfifo"
>>>>>>>>>>>>>>>> RM="/bin/rm"
>>>>>>>>>>>>>>>> TAR="/bin/tar"
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> DEFCODE=0
>>>>>>>>>>>>>>>> DUMPBASE="/data/backups"
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> errCode=${DEFCODE}
>>>>>>>>>>>>>>>> mailDir="/var/mail/zimbra"
>>>>>>>>>>>>>>>> zimbraDir="/opt/zimbra"
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Main()
>>>>>>>>>>>>>>>> {
>>>>>>>>>>>>>>>> service zimbra stop
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> RunMailRestore
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> service zimbra start
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ExitScript ${errCode}
>>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> RunMailRestore()
>>>>>>>>>>>>>>>> {
>>>>>>>>>>>>>>>> EXTENSION=".tar"
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> dumpDir="${DUMPBASE}/mail"
>>>>>>>>>>>>>>>> fifoDir="${dumpDir}/fifo"
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> RebuildFifoDir
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ${MKFIFO} ${fifoDir}/mail${EXTENSION}
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ${TAR} -xpf ${fifoDir}/mail${EXTENSION} 2>&1 </dev/null &
>>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> RebuildFifoDir()
>>>>>>>>>>>>>>>> {
>>>>>>>>>>>>>>>> if [ -d ${fifoDir} ]
>>>>>>>>>>>>>>>> then
>>>>>>>>>>>>>>>> ${RM} -rf ${fifoDir}
>>>>>>>>>>>>>>>> fi
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ${MKDIR} -p ${fifoDir}
>>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ExitScript()
>>>>>>>>>>>>>>>> {
>>>>>>>>>>>>>>>> exit ${1}
>>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Main
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> The restore script simply does a tar xpf instead of a tar
>>>>>>>>>>>>>>>> cpf.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Perhaps instead of doing that, just restore the data, and
>>>>>>>>>>>>>>>> then do the tar
>>>>>>>>>>>>>>>> xpf later.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> ------------------------------------------------------------------------------
>>>>>>>>>>>>> Want excitement?
>>>>>>>>>>>>> Manually upgrade your production database.
>>>>>>>>>>>>> When you want reliability, choose Perforce
>>>>>>>>>>>>> Perforce version control. Predictably reliable.
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> Bacula-users mailing list
>>>>>>>>>>>>> Bacula-users AT lists.sourceforge DOT net
>>>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> ============================================
>>>>>>>>>>>> Heitor Medrado de Faria | Need Bacula training? 10% discount
>>>>>>>>>>>> coupon code at Udemy: bacula-users
>>>>>>>>>>>> +55 61 2021-8260
>>>>>>>>>>>> +55 61 8268-4220
>>>>>>>>>>>> Site: www.bacula.com.br
>>>>>>>>>>>> Facebook: heitor.faria
>>>>>>>>>>>> Gtalk: heitorfaria AT gmail DOT com
>>>>>>>>>>>> ============================================
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> ============================================
>>>>>>>>>> Heitor Medrado de Faria | Need Bacula training? 10% discount coupon
>>>>>>>>>> code at Udemy: bacula-users
>>>>>>>>>> +55 61 2021-8260
>>>>>>>>>> +55 61 8268-4220
>>>>>>>>>> Site: www.bacula.com.br
>>>>>>>>>> Facebook: heitor.faria
>>>>>>>>>> Gtalk: heitorfaria AT gmail DOT com
>>>>>>>>>> ============================================
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> ============================================
>>>>>>>> Heitor Medrado de Faria | Need Bacula training? 10% discount coupon
>>>>>>>> code at Udemy: bacula-users
>>>>>>>> +55 61 2021-8260
>>>>>>>> +55 61 8268-4220
>>>>>>>> Site: www.bacula.com.br
>>>>>>>> Facebook: heitor.faria
>>>>>>>> Gtalk: heitorfaria AT gmail DOT com
>>>>>>>> ============================================
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------------
>>>>>>> Want excitement?
>>>>>>> Manually upgrade your production database.
>>>>>>> When you want reliability, choose Perforce
>>>>>>> Perforce version control. Predictably reliable.
>>>>>>>
>>>>>>> http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
>>>>>>> _______________________________________________
>>>>>>> Bacula-users mailing list
>>>>>>> Bacula-users AT lists.sourceforge DOT net
>>>>>>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> ============================================
>>>>>> Heitor Medrado de Faria | Need Bacula training? 10% discount coupon
>>>>>> code at Udemy: bacula-users
>>>>>> +55 61 2021-8260
>>>>>> +55 61 8268-4220
>>>>>> Site: www.bacula.com.br
>>>>>> Facebook: heitor.faria
>>>>>> Gtalk: heitorfaria AT gmail DOT com
>>>>>> ============================================
>>>>>
>>>
>>>
>>> --
>>> ============================================
>>> Heitor Medrado de Faria | Need Bacula training? 10% discount coupon code
>>> at Udemy: bacula-users
>>> +55 61 2021-8260
>>> +55 61 8268-4220
>>> Site: www.bacula.com.br
>>> Facebook: heitor.faria
>>> Gtalk: heitorfaria AT gmail DOT com
>>> ============================================
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Want excitement?
>> Manually upgrade your production database.
>> When you want reliability, choose Perforce
>> Perforce version control. Predictably reliable.
>> http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
>>
>>
>>
>> _______________________________________________
>> Bacula-users mailing list
>> Bacula-users AT lists.sourceforge DOT net
>> https://lists.sourceforge.net/lists/listinfo/bacula-users
>>
>>
------------------------------------------------------------------------------
Want excitement?
Manually upgrade your production database.
When you want reliability, choose Perforce.
Perforce version control. Predictably reliable.
http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|