Re: [Bacula-users] Bacula update slots and list volumes don't match
2013-04-02 03:34:16
Le 29/03/2013 21:22, unix1988 a écrit :
> Hello everyone. I am running Bacula version 5.0.3-1. The hardware
> configuration is a HP DL380 attached to a HP MSL4048. The issue I am running
> in to is that the tape library inventory and updates slots match but when I
> run "list volumes" from the bconsole prompt there are about 6 tapes that are
> inside the library that do not show up in the output. These are tapes that
> were part of a brand new batch so they were not known to the catalog
> previously.
>
> I've tried the following with no luck:
> update slots scan
> labeling the tapes (responds with an error stating the tapes are already
> labeled)
> shutting down the library and restarting bacula
>
> Thanks.
>
Hi
If your tape are blank or if you don't care about the jobs which are on it:
shutdown bacula
mount one tape in the drive
mt -f /dev/nst0 rewind
mt -f /dev/nst0 weof
start bacula
label
You have to do that for all your invisible tapes...I had the same problem.
regards
------------------------------------------------------------------------------
Own the Future-Intel(R) Level Up Game Demo Contest 2013
Rise to greatness in Intel's independent game demo contest. Compete
for recognition, cash, and the chance to get your game on Steam.
$5K grand prize plus 10 genre and skill prizes. Submit your demo
by 6/6/13. http://altfarm.mediaplex.com/ad/ck/12124-176961-30367-2
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [Bacula-users] Bacula update slots and list volumes don't match,
giggzounet <=
|
|
|