On Wed, Feb 13, 2013 at 12:28:49PM -0500, John Drescher wrote:
> On Wed, Feb 13, 2013 at 12:17 PM, Craig Van Tassle
> <cvantassle AT purdue DOT edu> wrote:
> > I recently upgraded my tape library to LTO-6 Tapes. I need to read from
> > my older LTO-4 tapes.
> >
> > When I run a restore I get
> >
> > director-sd acquire.c:121 Changing read device. Want Media Type="LTO-4" 
> > have="LTO-6"
> >   device="LTO6-0" 
> > (/dev/tape/by-path/pci-0000:04:00.0-sas-0x5000e111500dd002-lun-0-nst)
> >  Fatal error: acquire.c:182 No suitable device found to read Volume 
> > "000043L4"
> > client-fd Fatal error: job.c:2390 Bad response to Read Data command. Wanted 
> > 3000 OK data
> > , got 3000 error
> >
> > Do I have to create a new device to read the LTO-4 tapes?
> 
> I would do that.
> 
> John

If you changed the media type to "LTO-6" for your new drive you'll
need to define a separate device which can read the old media
type. You can use the same physical device for this I believe. 

All the best, Uwe 

-- 
NIONEX --- Ein Unternehmen der Bertelsmann SE & Co. KGaA



------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013 
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users