[Bacula-users] bacula jobs use volumes from the wrong pool


Hello,

Running 5.2.9, though I believe we've seen this sporadically in earlier 
versions.  Jobs are using volumes that are in pools to which they have 
not been assigned.

This is likely a bug as I don't see anything peculiar about our 
configuration.  We are using a tape library with 2 drives, both set to 
autoselect. The library contains volumes that are properly assigned 
(i.e. database entries for volumes look fine) to various pools, 
including a Full pool and an Incremental pool.

Twice in the past week, Full jobs which specify the use of the Full pool 
using jobdefs are using volumes from the Incremental pool.  I haven't 
narrowed down all the details, but I believe it's if the Incremental 
volume is already loaded in a drive when the Full job in question is 
launched.


Example:

01-Jul 22:00 <DIR> JobId 244098: Fatal error: JobId 243957 already 
running. Duplicate job not allowed.
01-Jul 20:03 <DIR> JobId 243957: Start Backup JobId 243957, 
Job=<JOB>.2012-07-01_20.00.04_03
01-Jul 20:04 <DIR> JobId 243957: Using Device "SL500-Drive-0"
01-Jul 20:42 <SD> JobId 243957: Spooling data ...
02-Jul 14:01 <SD> JobId 243957: Job write elapsed time = 17:19:00, 
Transfer rate = 33.39 M Bytes/second
02-Jul 14:01 <SD> JobId 243957: Committing spooled data to Volume 
"FB0161". Despooling 2,082,572,994,002 bytes ...
02-Jul 15:38 <SD> JobId 243957: End of Volume "IM0094" at 462:1559 on 
device "SL500-Drive-0" (/dev/SL500-Drive-0). Write of 262144 bytes got -1.
02-Jul 15:38 <SD> JobId 243957: Re-read of last block succeeded.
02-Jul 15:38 <SD> JobId 243957: End of medium on Volume "IM0094" 
Bytes=924,097,352,704 Blocks=3,525,155 at 02-Jul-2012 15:38.
02-Jul 15:38 <SD> JobId 243957: 3307 Issuing autochanger "unload slot 
148, drive 0" command.
02-Jul 15:39 <SD> JobId 243957: 3301 Issuing autochanger "loaded? drive 
0" command.
02-Jul 15:39 <SD> JobId 243957: 3302 Autochanger "loaded? drive 0", 
result: nothing loaded.
02-Jul 15:39 <SD> JobId 243957: 3301 Issuing autochanger "loaded? drive 
0" command.
02-Jul 15:39 <SD> JobId 243957: 3302 Autochanger "loaded? drive 0", 
result: nothing loaded.
02-Jul 15:39 <SD> JobId 243957: 3301 Issuing autochanger "loaded? drive 
1" command.
02-Jul 15:39 <SD> JobId 243957: 3302 Autochanger "loaded? drive 1", 
result: nothing loaded.
02-Jul 15:39 <SD> JobId 243957: 3304 Issuing autochanger "load slot 6, 
drive 0" command.
02-Jul 15:40 <SD> JobId 243957: 3305 Autochanger "load slot 6, drive 0", 
status is OK.
02-Jul 15:40 <SD> JobId 243957: Volume "FB0161" previously written, 
moving to end of data.
02-Jul 15:40 <SD> JobId 243957: Ready to append to end of Volume 
"FB0161" at file=7.
02-Jul 15:40 <SD> JobId 243957: New volume "FB0161" mounted on device 
"SL500-Drive-0" (/dev/SL500-Drive-0) at 02-Jul-2012 15:40.
02-Jul 18:19 <SD> JobId 243957: End of Volume "FB0161" at 274:5411 on 
device "SL500-Drive-0" (/dev/SL500-Drive-0). Write of 262144 bytes got -1.
02-Jul 18:19 <SD> JobId 243957: Re-read of last block succeeded.
02-Jul 18:19 <SD> JobId 243957: End of medium on Volume "FB0161" 
Bytes=535,390,861,312 Blocks=2,042,367 at 02-Jul-2012 18:19.
02-Jul 18:19 <SD> JobId 243957: 3307 Issuing autochanger "unload slot 6, 
drive 0" command.
02-Jul 18:20 <SD> JobId 243957: 3301 Issuing autochanger "loaded? drive 
0" command.
02-Jul 18:20 <SD> JobId 243957: 3302 Autochanger "loaded? drive 0", 
result: nothing loaded.
02-Jul 18:20 <SD> JobId 243957: 3301 Issuing autochanger "loaded? drive 
0" command.
02-Jul 18:20 <SD> JobId 243957: 3302 Autochanger "loaded? drive 0", 
result: nothing loaded.
02-Jul 18:20 <SD> JobId 243957: 3301 Issuing autochanger "loaded? drive 
1" command.
02-Jul 18:20 <SD> JobId 243957: 3302 Autochanger "loaded? drive 1", 
result: nothing loaded.
02-Jul 18:20 <SD> JobId 243957: 3304 Issuing autochanger "load slot 4, 
drive 0" command.
02-Jul 18:21 <SD> JobId 243957: 3305 Autochanger "load slot 4, drive 0", 
status is OK.
02-Jul 18:21 <SD> JobId 243957: Volume "FB0158" previously written, 
moving to end of data.
02-Jul 18:21 <SD> JobId 243957: Ready to append to end of Volume 
"FB0158" at file=1.
02-Jul 18:21 <SD> JobId 243957: New volume "FB0158" mounted on device 
"SL500-Drive-0" (/dev/SL500-Drive-0) at 02-Jul-2012 18:21.
02-Jul 21:14 <SD> JobId 243957: End of Volume "FB0158" at 274:1785 on 
device "SL500-Drive-0" (/dev/SL500-Drive-0). Write of 262144 bytes got -1.
02-Jul 21:14 <SD> JobId 243957: Re-read of last block succeeded.
02-Jul 21:14 <SD> JobId 243957: End of medium on Volume "FB0158" 
Bytes=546,439,698,432 Blocks=2,084,507 at 02-Jul-2012 21:14.
02-Jul 21:14 <SD> JobId 243957: 3307 Issui02-Jul 22:00 <DIR> JobId 
244271: Fatal error: JobId 244133 already running. Duplicate job not 
allowed.
02-Jul 22:00 <DIR> JobId 244268: Fatal error: JobId 243957 already 
running. Duplicate job not allowed.
02-Jul 21:16 <DIR> JobId 243957: Recycled volume "FB0162"
02-Jul 21:16 <SD> JobId 243957: 3301 Issuing autochanger "loaded? drive 
0" command.
02-Jul 21:16 <SD> JobId 243957: 3302 Autochanger "loaded? drive 0", 
result: nothing loaded.
02-Jul 21:16 <SD> JobId 243957: 3301 Issuing autochanger "loaded? drive 
0" command.
02-Jul 21:16 <SD> JobId 243957: 3302 Autochanger "loaded? drive 0", 
result: nothing loaded.
02-Jul 21:16 <SD> JobId 243957: 3304 Issuing autochanger "load slot 7, 
drive 0" command.
02-Jul 21:16 <SD> JobId 243957: 3305 Autochanger "load slot 7, drive 0", 
status is OK.
02-Jul 21:16 <SD> JobId 243957: Recycled volume "FB0162" on device 
"SL500-Drive-0" (/dev/SL500-Drive-0), all previous data lost.
02-Jul 21:16 <SD> JobId 243957: New volume "FB0162" mounted on device 
"SL500-Drive-0" (/dev/SL500-Drive-0) at 02-Jul-2012 21:16.
03-Jul 00:36 <SD> JobId 243957: End of Volume "FB0162" at 295:4268 on 
device "SL500-Drive-0" (/dev/SL500-Drive-0). Write of 262144 bytes got -1.
03-Jul 00:37 <SD> JobId 243957: Re-read of last block succeeded.
03-Jul 00:37 <SD> JobId 243957: End of medium on Volume "FB0162" 
Bytes=591,088,321,536 Blocks=2,254,823 at 03-Jul-2012 00:37.
03-Jul 00:37 <SD> JobId 243957: 3307 Issuing autochanger "unload slot 7, 
drive 0" command.
03-Jul 00:38 <DIR> JobId 243957: Recycled volume "FB0164"
03-Jul 00:38 <SD> JobId 243957: 3301 Issuing autochanger "loaded? drive 
0" command.
03-Jul 00:38 <SD> JobId 243957: 3302 Autochanger "loaded? drive 0", 
result: nothing loaded.
03-Jul 00:38 <SD> JobId 243957: 3301 Issuing autochanger "loaded? drive 
0" command.
03-Jul 00:38 <SD> JobId 243957: 3302 Autochanger "loaded? drive 0", 
result: nothing loaded.
03-Jul 00:38 <SD> JobId 243957: 3304 Issuing autochanger "load slot 9, 
drive 0" command.
03-Jul 00:39 <SD> JobId 243957: 3305 Autochanger "load slot 9, drive 0", 
status is OK.
03-Jul 00:39 <SD> JobId 243957: Recycled volume "FB0164" on device 
"SL500-Drive-0" (/dev/SL500-Drive-0), all previous data lost.
03-Jul 00:39 <SD> JobId 243957: New volume "FB0164" mounted on device 
"SL500-Drive-0" (/dev/SL500-Drive-0) at 03-Jul-2012 00:39.
03-Jul 01:08 <SD> JobId 243957: Despooling elapsed time = 10:58:19, 
Transfer rate = 52.72 M Bytes/second
03-Jul 01:08 <SD> JobId 243957: Sending spooled attrs to the Director. 
Despooling 2,500,634,015 bytes ...
03-Jul 01:31 <DIR> JobId 243957: Bacula <DIR> 5.2.9 (11Jun12):

   Build OS:               x86_64-unknown-linux-gnu redhat Enterprise 
release
   JobId:                  243957
   Job:                    <JOB>.2012-07-01_20.00.04_03
   Backup Level:           Full
   Client:                 "<FD>" 5.2.6 (21Feb12) 
i386-pc-solaris2.10,solaris,5.10
   FileSet:                "<FS>" 2012-02-01 20:00:23
   Pool:                   "Full-Pool" (From Job resource)
   Catalog:                "MyCatalog" (From Client resource)
   Storage:                "SL500-changer" (From Job resource)
   Scheduled time:         01-Jul-2012 20:00:04
   Start time:             01-Jul-2012 20:04:02
   End time:               03-Jul-2012 01:31:35
   Elapsed time:           1 day 5 hours 27 mins 33 secs
   Priority:               10
   FD Files Written:       6,915,330
   SD Files Written:       6,915,330
   FD Bytes Written:       2,080,113,652,089 (2.080 TB)
   SD Bytes Written:       2,081,613,855,190 (2.081 TB)
   Rate:                   19613.9 KB/s
   Software Compression:   None
   VSS:                    no
   Encryption:             no
   Accurate:               yes
   Volume name(s):         IM0094|FB0161|FB0158|FB0162|FB0164
   Volume Session Id:      147
   Volume Session Time:    1340291913
   Last Volume Bytes:      96,966,779,904 (96.96 GB)
   Non-fatal FD errors:    0
   SD Errors:              0
   FD termination status:  OK
   SD termination status:  OK
   Termination:            Backup OK

03-Jul 01:31 <DIR> JobId 243957: Begin pruning Jobs older than 10 years .
03-Jul 01:31 <DIR> JobId 243957: No Jobs found to prune.
03-Jul 01:31 <DIR> JobId 243957: Begin pruning Files.
03-Jul 01:31 <DIR> JobId 243957: No Files found to prune.
03-Jul 01:31 <DIR> JobId 243957: End auto prune


Note: FB0161|FB0158|FB0162|FB0164 are all in Full-Pool, whereas the 
first tape used in the job, IM0094 is in Incremental-Pool.


Anyone have ideas why it would be using a volume from a pool to which 
the job has not been associated?

thanks,
Stephen
-- 
Stephen Thompson               Berkeley Seismological Laboratory
stephen AT seismo.berkeley DOT edu    215 McCone Hall # 4760
404.538.7077 (phone)           University of California, Berkeley
510.643.5811 (fax)             Berkeley, CA 94720-4760


------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] bacula jobs use volumes from the wrong pool - bug?
