On 6/15/2012 1:07 PM, Erich Weiler wrote:
> Hi Y'all,
>
> We have two RHEL 6 servers, one is running bacula-dir and bacula-sd
> (with a lot of disk storage for the backups), and the other is the
> client we want to back up from running bacula-fd.
>
> Both servers are behind different firewalls, and each has a public IP
> address that is configured for 1:1 NAT to the internal server.  I can
> telnet from the director to the client on port 9102 and connect OK, and
> the client can telnet to the storage daemon on the other server on port
> 9103 and connect OK.  So, I think the network path is working.
>
> What appears to happen is that we start the backup job, and it connects
> and begins transferring and then almost immediately stops and then times
> out.  It transfers like 800 bytes and seems to just sit there.

Are you sure the Password= line is the same in both bacula-dir.conf and 
the client's bacula-fd.conf?


------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and 
threat landscape has changed and how IT managers can respond. Discussions 
will include endpoint security, mobile security and the latest in malware 
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users