Re: [Bacula-users] Question

You could try with Bacula 5.2.6 in case there is a bug fix.

__Martin


>>>>> On Wed, 28 Mar 2012 15:44:37 +0200 (CEST), Juan Diaz said:
> 
> Pablo,
> 
> I have tried all day with your configuration and it doesn't work. Could you 
> please send me the complete configuration for search the differences between 
> the two of them.
> 
> We work with Bacula 5.0.2 and linux debian 2.6.32-5-amd64.
> 
> Also I tried deduplication with the same machine I did first base after full 
> and lately differential and the differential was smaller. But when I use that 
> base with another machine the differential is bigger than full backup and 
> that doesn't make sense.
> 
> I CC the group in case there's someone who had the same trouble.
> 
> Thank you very much four your help, 
> 
> 
> Juan David DIAZ
> INSA de Lyon
> Universidad ICESI
> +33 6 49 59 23 86
> 
> 
> ----- Mail original -----
> De: "Juan Diaz" <juan.diaz AT insa-lyon DOT fr>
> À: "Pablo Marques" <pmarques AT miamilinux DOT net>
> Cc: "José Frederico" <jose.frederico AT callide DOT fr>, bacula-users AT 
> lists.sourceforge DOT net
> Envoyé: Mercredi 28 Mars 2012 09:47:23
> Objet: Re: [Bacula-users] Question
> 
> Thank you Pablo but it didn't worked. The incremental or differential 
> continues being bigger than the full backup.
> 
> Juan David DIAZ
> INSA Lyon
> Universidad ICESI
> +33 6 49 59 23 86
> 
> 
> ----- Mail original -----
> De: "Pablo Marques" <pmarques AT miamilinux DOT net>
> À: "Juan Diaz" <juan.diaz AT insa-lyon DOT fr>
> Cc: "José Frederico" <jose.frederico AT callide DOT fr>, bacula-users AT 
> lists.sourceforge DOT net
> Envoyé: Mardi 27 Mars 2012 17:40:41
> Objet: Re: [Bacula-users] Question
> 
> Juan:
> 
> That is no happening to us and the only obvious difference between our set up 
> and yours is in the fileset definition.
> 
> Can you remove these lines in your fileset and give it a try?
> BaseJob = pmugcs5
> Accurate = mcs
> Verify = pin5
> 
> This is our fileset:
> 
> FileSet {
>   Name = "Root-set"
>   Include {
>     Options {
>       signature = MD5
>       compression = LZO
>       Sparse = yes
>       aclsupport = yes
>       xattrsupport = yes
>      }
>     File = /
>   }
> }
> 
> Good luck
> 
> Pablo
> 
> ----- Original Message -----
> From: "Juan Diaz" <juan.diaz AT insa-lyon DOT fr>
> To: bacula-users AT lists.sourceforge DOT net
> Cc: "José Frederico" <jose.frederico AT callide DOT fr>
> Sent: Tuesday, March 27, 2012 9:35:27 AM
> Subject: [Bacula-users] Question
> 
> Hello,
> 
> Right now we're evaluating and deciding which is going to be our Backup 
> software, Bacula is the most optioned so far but we're having troubles with 
> the implementation of the file DE duplication.
> 
> When we make a base job of the machine virtual that is going to be the base, 
> his size is 553 Mb. After that when we make a full backup of a machine that 
> was created from the machine "base". His size is 242 Mb that’s ok because it 
> only has to make backup of the files that are different of files of the base.
> 
> The problem comes when we make a differential backup right after the full 
> backup. The result must be 0 Mb or something really small, but we're getting 
> backups of 462 Mb.
> 
> We used one configuration similar to the one we found in the Bacula’s manual. 
> http://www.bacula.org/5.2.x-manuals/en/main/main.pdf Chapter 34.
> 
> We have tried removing BaseJob, Accurate and Verify from FileSet but it 
> didn’t worked. We have always the same sizes that don't make sense.
> 
> We would like to know if you have a solution for our problem, because it 
> worked when we don't use DE duplication (just with full and Differential), 
> but we are very interested in using it, that would save us a lot of space on 
> ours hard drives.
> 
> We attached here the job’s configuration:
> 
> ob {
>   Name = "BackupBasse"
>   Type = Backup
>   Level = Base
>   Client = basse-fd
>   FileSet = "TOUT"
>  Schedule = "programme2"
>   Storage = File
>   Messages = Standard
>   Pool = File
>   Priority = 10
>   Write Bootstrap = "/var/lib/bacula/%c.bsr"
> }
> Schedule{
> Name = "programme2"
> Run = at 14:30
> }
> 
> Job {
>   Name = "Backupftp"
>   Type = Backup
>   Base = Backupftp, BackupBasse
>   Accurate=yes
>   Client = basseftp-fd
>   FileSet = "TOUT"
>   Schedule = "programme"
>   Storage = File
>   Messages = Standard
>   Pool = File
>   Priority = 10
>   Write Bootstrap = "/var/lib/bacula/%c.bsr"
> }
> 
> Schedule{
> Name = "programme"
> Run = Level=Full at 14:31
> Run = Level=Incremental at 14:32
> 
> }
> 
> FileSet {
>   Name = "TOUT"
>   Include {
>         Options {
> BaseJob = pmugcs5
> Accurate = mcs
> Verify = pin5
> }
>     File = /
>   }
> }
> 
> Thank you very much for your help,
> 
> Juan David DIAZ
> 
> ------------------------------------------------------------------------------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here
> http://p.sf.net/sfu/sfd2d-msazure
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
> 
> ------------------------------------------------------------------------------
> This SF email is sponsosred by:
> Try Windows Azure free for 90 days Click Here 
> http://p.sf.net/sfu/sfd2d-msazure
> _______________________________________________
> Bacula-users mailing list
> Bacula-users AT lists.sourceforge DOT net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
> 
> 

------------------------------------------------------------------------------
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here 
http://p.sf.net/sfu/sfd2d-msazure
_______________________________________________
Bacula-users mailing list
Bacula-users AT lists.sourceforge DOT net
https://lists.sourceforge.net/lists/listinfo/bacula-users